Top Kits Ballast Electric

Bullet Lines Complete Wakeboard Ballast Bag Kit, Portable Wake Enhancement for Wakeboard and Wakesurf Boats, Includes 2 x 550 LB Bags and 800 GPH Pump, Grow Your Surf Wake at 107 lbs per min (550)

  • Wakeboard Boat Ballast Bag w/ Cover, Our heavy duty cover has 2 easy access holes for the fill and drain valves, heavy duty zipper, and straps for repositioning when full..
  • PORTABLE - Our wake enhancement kits allow you to take it out and fill when you need that crazy huge wake, and stow it away when you are done..
  • HEAVY DUTY - This kit includes a 30 Gauge PVC bladder and heavy duty cover to help avoid puncturing..
  • NO VALVE LEAKAGE - The bladder has 2 drain and fill holes with valve flaps that open when the pump is inserted and close off when the pump is removed.
  • COMPLETE KIT - Includes 800 Ballast Bag Pump with 12 feet of cord, and 9 feet of PVC Tubing.
Check Stock

DDM Tuning Ultra Canbus 55W HID Kit All Bulbs and Colors 9005/9006 5500K

  • Ballast: The ballasts have been further improved for 2015 to require less current on startup to protect the factory wiring and to extend the life of....
  • Bulbs: Our Premium Ultra HID bulbs are quite simply the best..
  • Output: Up to 3400 Lumens with a 4500K bulb..
  • Kit Includes: 2 x DDM Ultra Canbus HID Ballasts, 2 x Ultra HID Bulbs..
  • Warranty: As always our HID kits come with a lifetime warranty..
Check Stock

Feit Electric T848/850/B/LED/2/5 4FT T8 LED Tube Light, Type B Ballast Bypass, 18W=32W, 5000K Daylight, Double-End Powered, F32T8 Fluorescent Tube Replacement, Damp Rated, UL, Pack of 10

  • F32T8 FLUORESCENT TUBE REPLACEMENT - standard 4 Ft LED Linear tubes are designed to replace T8 fluorescent tube.
  • the 4' T8 LED light works with standard 120 volts or 277 volts and requires a ballast bypass installation.
  • BALLAST BYPASS INSTALL (DIRECT WIRE) - Direct wiring to eliminate the need of ballast.
  • Not compatible with single-ended powered sockets.
  • LED TUBE DAYLIGHT - This 5000K light temperature stimulates full spectrum light! It is recommended for an area for reading, craft rooms, and task lighting.
  • This light is used where you desire a vibrant, bright light to see all the details needed.
  • FEATURES - The 32-watt equivalent shatter resistant coated T8 LED light bulb only uses 18 watts and produces 1800 lumens and lasts upto 35,000 hours.
  • Has instant on brightness and no flickering.
  • Save money and time by switching to energy efficient lighting.
  • UL LISTED – Feit electric uphold the highest standards for all our products with optimal performance and safety.
  • With 40+ years of experience in lighting, we are the leader in lighting innovations.
Check Stock

Electric Scooter Adult, 5 Inch 24V 180W Motor, Brushless Motor, Low Noise, with Hall Sensor, Electric Scooter Motor Replacement Parts

  • 1. HIGH SPEED MOTOR: Powerful Brushless DC Motor Kits 2500W 60V, Rated Speed No-load 4400rpm, Max can be 5800rpm, Motor Rated current 45A..
  • 2. DIY KITS, Electric Go kart Motor, small size, high speed, BLDC mid-drive motor with T8F sprocket, scooter motor with mounting bracket is easier to install and carry, with air cooling holes..
  • 3. DC motor kit reverse design, BLDC kart motor can run clockwise or counterclockwise through motor reverse line or handlebar reverse switch, and has a 3-speed function, low speed 50%, medium speed 70-80%, The high-speed speed is 100% efficient, but do not let the motor run in reverse for a long time, which is not safe for the motor life..
  • 4. 24 Mosfet 45A brushless motor controller. This speed controller uses high-quality materials. This controller has Hall, 3-speed, reverse, throttle, charging, electronic brake, power lock, light functions, etc..
  • 5. List and application of electric scooter motor kits, BLDC motor, speed controller, handlebar throttle, pedal throttle, power lock key, T8F tooth plate ring, T8F chain, 3-speed switch. Suitable for electric scooters, electric bicycles, mini motorcycles, off-road vehicles, electric karts, bicycles, four-wheel drive vehicles, other DIY projects, etc..
Check Stock

GE Magnetic Ballast HID Ballast for 1 400-Watt Metal Halide Lamp Multi-5 Ballast 120 208 240 277 or 480 Volt 1-Pack Multi-Volt High Intensity Discharge Magnetic Ballast

  • MAGNETIC BALLASTS: GE magnetic ballast construction is ideal for a variety of applications..
  • EASY TO INSTALL BALLASTS: This HID ballast comes with a mounting bracket for easy installation options..
  • MULTIVOLT BALLAST: This HID ballast handles voltage of 120, 208, 240, 277, and 480-Volts..
  • HID BALLAST FOR METAL HALIDE LAMPS: This HID ballast will accept up to (1) 400-Watt metal halide lamp..
  • MAGNETIC HID BALLAST MOUNTING DIMENSIONS: This ballast has mounting dimensions of 4.4-Inch length by 3.9-Inch width. The mounting slot is set 0.2-Inch....
Check Stock

Robertson 3P20116 eBallast, Instant Start, NPF, 1 or 2 Lamp F32T8, 120Vac, 60 Hz, Model ISU232T8120 BA (Replaces Robertson 3P20003, Model ISU232T8120 /B)

  • SECOND BREATH FOR FLUORESCENT LIGHT FIXTURES: Instead of buying new tube lights, save your money by replacing fluorescent light ballast from old magnetic technology to the new electronic 2 lamp T12 ballast. It is designed to serve 2 lamps conveniently..
  • INSTANT FULL BRIGHTNESS: Comfortable workspace is essential for healthy office organization. That's why sunlight lamp technology is so popular. With our rapid start ballast, you'll get bright light immediately and with no flickering, buzzing, or humming..
  • OBVIOUS CABLE'S COLORS AND COMPACT SIZE: Changing fluorescent light ballast is easy with our tube light ballast due to the popular Rapid Start Wiring color scheme. You need to match the same colors that your old lamp magnetic ballast had in most cases..
  • COMPATIBLE HOME OFFICE ESSENTIALS: Instant start ballast helps to enhance lamp life and is equivalent to many fluorescent ballast types. It can be installed on a desktop lamp, as of kitchen light ballast, or to any other light home office accessories..
  • SPECIFICATIONS: 120V 60HZ fluorescent lamp ballast 59/71W and 120-277V. For T12 fixture light bulb. 20 FT max lead remote mounting. Passive power factor correction. Measures 9.5"x1.7"x1.18" - beneficial for desk supplies storage. Weigh 1.7 LBS..
Check Stock

HID Xenon Headlight Ballast - Control Module - Replaces 63126907488 63120150614 05103356AA - Compatible with BMW Audi Mercedes-Benz Vehicles & More - X5 Z4 545i Pacifica 9-3 A6 A8 S6 S8

  • Replacement HID OR Xenon Ballast - is responsible for supplying power to your headlight's bulb. Overtime your HID Ballast can fail resulting in a....
  • Compatible Replacement for BMW, Audi, Mercedes-Benz, Chrysler, Jaguar, Rolls Royce, Saab, Ford & Maserati Vehicles - 2006 - 2008 A6 | 2007 - 2008 S8 |....
  • Replaces Part# 63126907488, 63120150614, 05103356AA, 12790592 - Each of your vehicle’s headlights has its own ballast. These ballasts are commonly....
  • OEM Fit, Quality, Finish - While this is not a genuine OEM ballast. This AA Ignition HID Xenon Ballast is a direct replacement for the ballast on....
  • Lifetime Warranty - This HID Xenon Ballast comes complete with a lifetime warranty. If the ballast ever fails simply contact us for a replacement.....
Check Stock

Feit Electric T848/865/B/LED/2/5 4FT T8 LED Tube Light, Type B Ballast Bypass, 18W=32W, 6500K Daylight Deluxe, Double-End Powered, F32T8 Fluorescent Tube Replacement, Damp Rated, UL, 10-Pack

  • F32T8 FLUORESCENT TUBE REPLACEMENT - standard 4 Ft LED Linear tubes are designed to replace T8 fluorescent tube.
  • the 4' T8 LED light works with standard 120 volts or 277 volts and requires a ballast bypass installation.
  • EASY DOUBLE-ENDED CONNECTION INSTALLATION - This UL-Listed T8 LED tubes are dual-end powered.
  • Direct wiring to eliminate the need of ballast.
  • the non-dimmable energy efficient 4 ft T8 LED tube light can save upto 44% on your electric bill.
  • LED TUBE DAYLIGHT DELUXE - This 6500K light temperature stimulates full spectrum light! It is recommended for an area for reading, craft rooms, and task lighting.
  • This light is used where you desire a vibrant, bright light to see all the details needed.
  • FEATURES - The 32-watt equivalent shatter resistant coated T8 LED light bulb only uses 18 watts and produces 1800 lumens and lasts upto 35,000 hours.
  • Has instant on brightness and no flickering.
  • Save money and time by switching to energy efficient lighting.
  • UL LISTED – Feit electric uphold the highest standards for all our products with optimal performance and safety.
  • With 40+ years of experience in lighting, we are the leader in lighting innovations.
Check Stock

Leviton DG15S-1BW Decora Smart Switch, Zigbee Certified, White

  • Zigbee 3.0 CERTIFIED: requires Zigbee hub such as Xfinity Home Touch Screen, Amazon Echo Plus and Echo Show (2nd Gen), and Samsung SmartThings..
  • VOICE CONTROL: works with Alexa (Zigbee hub required, Alexa device and hub sold separately).
  • STYLE: familiar Decora form factor accepts optional wall plates and 6 color change kits.
  • LED and CFL up to 600W, incandescent up to 1800W, fluorescent ballast loads up to 15A..
  • MULTI-LOCATION: facilitates multi-location (3-way) switching with DD0SR-1LZ coordinating remote (no LED indicator) or DD0SR-DLZ matching remote (with LED indicator)..
Check Stock

28474-89904 Xenon HID Headlight Ballast Control Unit with Igniter & D2S Bulb Compatible With Nissan 350z 370z Altima Murano Rogue Infiniti G35 G37 Fx35 Qx56 Qx70 -Replaces 28474-8991A NZMNS111LAN

  • HID HEADLIGHT BALLAST REPLACeMENT - Also known as headlight control unit, a crucial part of hid lighting system, provides the voltage needed to start the lamp and regulates the electrical current of the light once it is lit. A failed ballast will cause your bulb to burn. When the voltage is input, the output power of the ballast can be kept constant at about 35W or 50W to protect the HID bulb from damage. The ballast fits either the left or right hid headlights..
  • FITMENT VEHICLE - The ballast compatible with 2003-2009 Nissan 350Z Coupe, Nissan 350ZR Roadster, Infinity M35 / M45.
  • 2011-2013 Infiniti QX4, G37, M37, M56, QX56, 2010-2016 Nissan 370Z, GT-R, 2007-2010 Nissan Altima, Infinity G37 Sedan, 2003-2008 Infinity FX35, Infinity FX45, 2004-2010 Nissan Maxima, Infinity QX56, 2005-2006 Infinity Q45, Infinity G35 Sedan, 2003-2010 Nissan Murano, 2008-2016 Nissan Rogue, 2011-2016 Nissan Quest, 2003-2007 Infinity G35 Coupe, 2012 Infiniti FX35, 2013 Infiniti.
  • REPLACe PART NUMBER - The ballast replace NZMNS111LANA,NZMNS111LBNA, 28474-8991D, 28474-89904, 28474-89907, 28474-8991A, 28474-8991B. Compatible with g37 headlight ballast is a perfect solution.This ballast ....
Check Stock

iPower 600W HPS MH Grow Light System Kits, 19-inch Wing Reflector Hood and Digital Dimmable Horticulture Electronic Ballast, Bulbs and Timer Included

  • Stable electronic ballast: 600W digital dimmable ballast supports 120V/240V input.
  • stable power output to ensure no flicker.
  • 19-inch wing reflector: Up to 4' x 4' light coverage.
  • built-in 15 feet heavy duty lamp cord with E39 Ceramic Mogul Socket and standard hydroponic S-Plug.
  • highly 95% reflective textured German aluminum maximizes the light reflected.
  • Bulbs include: 1 x 600W 2100K super HPS bulb.
  • optimized spectrum and high PAR (Photosynthetic Active Radiation) to promote healthy plant growth and soonest flourish.
  • Heavy duty digital programmable electric timer: 8 ON/OFF programs, 7-Day programmable, flexible independent time settings for minutes, hours, days. Using LCD digital display, grounded 3-Prong design to ensure safety use.
  • Adjustable rope: The 8-ft adjustable ratchet clip hanger rope can withstand up to 150 pounds.
  • up to 75-pounds load capacity per ratchet, 150-pounds per pair.
Check Stock

ICN2P32N, 120-277V, 50-60Hz Input Frequency, Solid Wire Type, Instant Start Centium Electronic Fluorescent Ballast for 2 F32T8 Lamp Type, Indoor/Outdoor Use with Automatic Restart Ballast Box, 10 Pack

  • FEATURES: With its reliable and long-lasting energy efficient performance, the Ciata ICN2P32N Instant Start Centium Electronic Fluorescent Ballast is a perfect choice as an Electronic Ballast that regulates the current to the lamps and provides sufficient voltage to start the lamps. Featuring a starting method of Instant Start and Automatic Restart facility, the Ballast will be a premium addition to any Fluorescent F32T8 Lamp type fixture..
  • GENERAL INFO AND DIMENSIONS: Designed for 1/2 Piece/Unit T8 Fluorescent Lamp piece per unit, the Ciata Ballast features a T-Case Maximum Temperature (Nom) of 70°C. The Instant Start Centium Electronic Fluorescent Ball features a Sound Rating of A category. Housing dimensions of the Electronic Ballast constitute the following 9.5-inch x 1.3-inch x 1.0 inch and constitute a Lamp Rated Watts of 32 W respectively..
  • ELECTRICAL AND OPERATING DETAILS: Constituting an Input Voltage of 120 to 277 V and Input Frequency of 50 to 60 Hz, the Ciata Ballast has a Max THD of 10% and has got an Ignition Time (Nom) of 0.1s. Other specifications constitute the following – Lamp Current Crest Factor (Nom): 1.7, Ballast Factor (Nom): 0.89, Power Factor (Nom): 0.98, Input Power (Nom): 56-56W and with a Minimum Operating Input Current o....
Check Stock