Top Knurled Wing Screws

Floyutin 10 PCS Stainless M8 Wing Nuts Metric Thread Butterfly Clips Fasteners Kit

  • Measurement (Appr.): M8x1.25 304 Stainless Metric standard wingnuts. M8 stands for Metric thread inner diameter(8mm/0.31"), thread pitch 1.25mm.Thread Max outer diameter 0.61"/15.6mm,thick 0.35"/9mm.the wing thick 0.2"/5mm, wing length 0.75"/19mm : Fit on to M8x1.25 screws/bolts. Fully threaded, Right hand direction. More detail size please refer to the photoes..
  • Thumb nuts with 2 butterfly wing on each side. Hand twist without tools, Fit for finger tightening or lossening. Allows you to adjust the tightness of the legs easily. Wings are thick(0.34") and don't see an issue with any bend distortion..
  • Easy to install: Serve as a nut, Use metric screws or apprapriate sized bolts to mount ss wing nuts. Just spin on on easily, tighten nicely, and stay in place. Please choice the right metric thread size match bolts or screws and driver..
  • Multi-purpose Application: SS heavy duty threaded can be mounted with bolts. Used it for quick disconnect on bolted connection.Just for hanging bird houses,furniture decoration,hardware lighting, marine battery posts. Better replace the old nuts for getting adjusted or temporarily removed pretty often..
  • 10 pcs wingnuts included. No Bolts/Dirver included. Made of 304 stainless steel, good solid .corrosion resistant,sturdy and ....
Check Stock

beiyoule 6PCS 1/4inch Hex Shank Aluminum Alloy Screwdriver Bits Holder Extension Bar Drill Screw Adapter Quick Release Keychain Easy Change

  • Package included: 1pcs knurled screwdriver bit holder + 2pcs adjustable length Screw Drive Guides, meet the needs of driving screws in different situations.
  • The Screw Drive Guides are not just bit tip holder, its self-retracting guide sleeve can slide to cover the long screw and helps to position the screw while driving screws. Get this to save screws from wobbling and fingers from getting damaged!.
  • The knurled Screwdriver Bit Holder material:stainless steel.
  • 2pcs Screw Drive Guides extension material: aluminum, durable, withstanding high pressure.
  • Interface come with locking mechanism and built-in magnetic, easy to lock the screwdriver bits more tightly.
  • Used for screwdriver bits, drill, batch head and other tools for the conversion, hex shank can fit power drills chuck, 1/4" impact drivers and hand-held drivers..
Check Stock

AIR LOCKER CN25AL 14 Gauge Concrete T-Nails for Concrete Nailers 2-1/2 Inch Smooth Shank (2 Packs of 1000)

  • Replacement Frame Nail Gun Donut Flush Nailer Part.
  • Compatible With: Hitachi FN83A NR83A NR83A2 NR83A2 NR83A2(S) FR350A.
  • Includes a wrench, two wing nuts and donut flush nailer.
  • It can be connected to the nail head by fixing screws or thumb wing nuts. Fixing screws or wing nuts for easy installation.
Check Stock

X AUTOHAUX 8pcs G1/4-20 Chrome Valve Cover Bolt for Chevy 283 302 305 307 327 350 383 400 Engines

  • Valve cover wing bolts fabricated of strong lightweight aluminum..
  • Valve cover wing bolts chrome anodized finish..
  • Meet OEM size with standard Y top 1/4 in. 20 X 5/8 in. L..
  • Extra long threads provide additional thickness.Washers and hold down tabs are not included with the wing bolts..
  • These wing bolts are highly durable and make valve cover removal fast and easy.Valve cover wing bolts includes 4 per set with set screws..
Check Stock

1/4 Male to 1/4 Male Threaded Tripod Screw Adapter Double Sided Standard Mounting Thread Converter for Camera Cage Mount Avatar 2 Pack

  • High Quality - This camera screw adapter is well constructed made out of solid metal. Rugged metal construction ensures long life and reliable daily....
  • Easy to Use - Precision made 1/4"-20 to 1/4"-20 (male to male) metal tripod screws,international standard. Help you gain more rig combination....
  • Knurled Surface - Knurled surface provides excellent grip for easy installation and removal. Anti-slip, complete and deep thread without burrs,....
  • Muti-Function - International Standard universal camera 1/4 screw fits for any dslr slr camera tripods, monopods, telescopes, ball heads, lens....
  • Easy to Carry - Lightweight, easy to carry, they can even serve as back up for the counterpart in your rigs. Camera screws replacement, widely used on....
Check Stock

Prime-Line T 8724 Storm Door Panel Clip with Screws, 1/4 inch, Aluminum (Pack of 8)

  • Secures storm window panels to storm doors.
  • Can use an adjustable wrench to tighten, use caution not to over tighten and cause damage.
  • 8 Storm panel clips and knurled head screws per package.
Check Stock

Moen R8732P Home Care Bathroom Safety 32-Inch Grab Bar with Concealed Screws, Peened, Stainless

  • Able to support up to 500 lbs of pull force to provide a stable, with knurled textured anti-slip grip, reliable handhold.
  • Made of stainless steel for a lasting strength and quality..
  • Concealed secure mount design allows for easy, secure installation at any angle, allows you to cover any unsightly screw holes and continue a clean, sleek trend to your bath and shower..
  • Use iMomwee 24 inch anti-slip safety grab bars in commercial and residential places as in the bathroom, kitchen, along stairways, swimming pool, laundry room,toilet, bathtub and shower safety grab Handrails for additional fall prevention, especially for the handicap, elderly, disabled, pregnant women and children. Not only apply to use as bath shower grab bar, but also can hold clothing,towel and etc..
  • The total length is 24 inch. 1.25 inch bar diameter allows enough space to easily grip bar for added support.
  • Anti-slip grab bar is made of durable stainless steel construction. It's a good choice for anywhere you need a helping hand to balance you..
  • iMomwee 24-Inch Concealed Mount Safety Bath and Shower Grab Bars backed with 3 Years of Free Replacement Warranty. These 24in grab bars can be permanently used once it's properly installed..
  • iMomwee 24 inch chrome finished anti-slip shower gra....
Check Stock

Tricktoppers 4 Black Anodized Knurled Billet Aluminum Motorcycle License Plate Frame Fastener Tag Bolts - 44 Mag Revolver Gun Cylinder Printed Emblem

  • 4 Custom Knurled Billet Aluminum Custom Logo Motorcycle License Plate Frame Tag Bolts For Most Motorcycle Models With Through Hole Mounting Brackets Like Harley, Honda, Ducati, Kawasaki, Victory,Indian & Many More Makes.
  • Features: Black Anodized Aluminum Finish Knurled Sides Large 1/4" Tall By .8" Round Billet Aluminum Head Custom Graphic Logo Steal Treaded Stud x 3/4" Long . No tools required to install with included wing nut fastener. MADE IN THE U S A.
  • Logo Features: High Resolution Graphics Printed on 3M Automotive Grade Vinyl Gel Top Polyeurethane Domed Sealed Graphics UV & Fade Resistant Graphics Scratch & Water Resistant Graphics Logo Size 3/4" Pre-installed for you by us.
  • Part Warnings: For Minimum 1/4 License Plate Holes That can be accessed from rear to tighten combo bolts Not Recommended for most cars & trucks with machine or metal screw mounting with limited or no access to rear of license plate to tighten tag bolts May work with some bumpers with access to back side to tighten nuts on some cars & trucks or trailers.
Check Stock

10Pcs of M3 M4 M5 M6 M8 Knurled Thumb Nuts Round Hand Grip Knobs Female Threaded 304 Stainless Steel DIN 466 High Type

  • 10pcs of M3, M4, M5, M6, M8 knurled thumb nuts, 2pcs of each size..
  • 304 stainless steel materialand durable to use..
  • The knurled portion adds friction for extra grip when tightening..
Check Stock

Fastenmaster Wood Screw 4 ' Pack 250

  • Stainless Steel Wood Screws Provide the Ultimate in Corrosion Resistance.  305 Stainless Steel..
  • Stainless Steel Screws are The Screw for the Job for Coastal Applications & Many other Applications..
  • Self-Countersinking Nibs & Drag Reducing Knurled Shoulder for a Cleaner & Easier Installation..
  • Quality Wood Screw Thread Require Less Torque to Drive the Screw & Provide Maximum Holding Power..
  • Torx/Star Drive Wood Screw Head Provides Twice the Torque of Phillips or Square Drive Screw Heads..
Check Stock

Prime-Line T 8731 Storm Door Panel Clip, Deep Reach with Screws, White (Pack of 8)

  • Used to secure glass or screen panels to the frame of storm doors.
  • Aluminum construction with plastic screws.
Check Stock

Nipple Covers for Women,Reusable Adhesive Invisible Pasties Silicone Cover Nippleless Covers Breast 2 Pairs

  • OVERALL LENGTH - This cabinet handles gold is 7 inch (178mm) and the hole center to center is 5 inch (128mm).
  • EASY TO INSTALL - Gold drawer pulls mounting screws : 1 inch (25mm) * 20 + 1.5 inch (45mm) *20(adjustable). Install with only one screwdriver..
  • LOOK GREAT - This brushed brass cabinet pulls are designed with gold knurling pattern. The knurled texture makes the gold dresser handles comfortable to touch..
  • DURABLE QUALITY - The sturdy brushed gold cabinet pulls are made by Aluminum, which make it durable..
  • EXCELLENT SERVICE - Whenever you find any issues on our gold handles for cabinets, you can absolutely replace the brass knurled knob or get your money back..
Check Stock