Top Kohler Toilet Replacement Parts

Kohler Toilet Flapper: Flusher Replacement Part for Kohler Fill Valve |Repair Kit for 84995 or Other Models|2 Tank Stopper with Ball & Chain Hinge

  • 1.Fits Kohler: Ankara (14230),Fables and Flowers (14224),Laureate (14291),Prairie Flowers (14290-WF),San Raphael (3466, 3467, 3384),Revival (3360, 3612),Rialto (3386),Rosario (3434).
  • 2.Water saving: Replace old, leaky and inefficient toilet flappers to save on expensive water waste with this large toilet flapper.
  • 3.Easy to Install: No tools are required for installation.Includes stainless steel chain with clip hook.
  • 4.High quality material:This type of toilet flapper is made of flexible rubber for a tight seal and easy to install..
  • 5. High quality replacement toilet parts :Replace old, leaky and inefficient toilet flappers to save on expensive water waste..
Check Stock

KOHLER GENUINE PART 1080961 CANISTER VALVE ASSEMBLY KIT, Black, Small

  • Protect the warranty on KOHLER products, always look for the KOHLER GENUINE PARTS logo.
  • Complete canister assembly kit including gaskets.
  • Compatible with the following KOHLER tank models: Memoirs 4491 & 4492.
  • Look inside the back wall of the toilet tank to identify tank model number.
Check Stock

2Pcs Toilet Seat Screws, Steel Toilet Seat Hinge Bolts and Nuts, Heavy Duty Toilet Seat Fastener with Plastic Nuts and Metal Washers, Toilet Hardware Replacement for Top Mount Toilet Seat Hinges

  • ... much better than the plastic ones. Update your loosing with bolt with the steel toilet seat hinge bolts, there will be no more wobbly toilet seats, and the toilet seat's nut/bolt was never getting lose any more..
  • [WIDE COMPATIBILITY] – The toilet seat fastener replacement hinge bolts universally fit for most toilet seat. The toilet hardware replacement bolts and nuts are compatible with TOTO, Kohler, American Standard Toilets and Others..
  • [EASY TO INSTALL] - The Toilet Seat Screws Kit includes all installation parts: galvanized-steel bolts, plastic nuts and metal washers. The universal toilet seat hinge bolts and screw can be installed with a household tools and takes only a few minutes. It’s an efficient solution to fix the problem that toilet seat's nut/bolt was getting lose and not fitting tight enough..
  • [SIZE] - The heavy-duty steel toilet bolt screws are about 2.75 inches in length and the thread diameter is approx. 0.3 inches. The toilet seat fixing screws are more stable than normal screws, preventing the toilet lid from sliding, allowing you to sit comfortably on a stable toilet seat..
Check Stock

2-Pack of Kohler-Compatible Canister Flush Valve Seal Replacements For Toilets (Equivalent to K-GP1059291)

  • Perfect Replacement for your Kohler K-GP1059291 Canister Flush Valve Seal (red or yellow color). Made from high-quality, durable rubber. Equivalent to part K-GP1059291 / 2475620.
  • Create A Stronger Flush: Toilet gasket seals wear out over time and need to be replaced - replacement creates better flushing pressure and results in a quieter toilet. No one wants a loud or hard to flush toilet!.
  • Works On Kohlers With Flush Valve: Compatible with all Kohler toilets with a canister flush valve. If you have any questions about fit, please ask a question below. Outer diameter of 3 3/8".
  • 3 Minute Install: Installation instructions for proper use below. Installation is simpler than you'd expect, and does not require you to remove the base of the toilet. Pack of 2 for a great value!.
  • Please note: This is an aftermarket replacement product (produced by Impresa) meeting or exceeding the quality of OEM rings (based on in-house testing).
Check Stock

Kohler 52 050 02-S Engine Oil Filter Extra Capacity for CH11 - CH15, CV11 - CV22, M18 - M20, MV16 - MV20 and K582, 2 Pack

  • ... FrontMount 618, 718K, 620T, 623T, 723KH2, 723T, 725KT, 727T 727K, 727T6 & 727T EFI Models Grasshopper MidMount 120K, 125V, 225V-Gr, 227V-G4 EFI, 329G4, 333G5, 218, 220, 223, 225, 227, 327 EFI OEM spin-on oil filter..
  • GENUINE OEM PARTS: Protect your investment and ensure peak performance by trusting only genuine OEM replacement parts and supplies to maintain your engine. These parts are manufactured to meet ultra-precise engineering specifications, and can help you maximize performance and significantly extend the life of your machine..
  • OIL FILTER REPLACEMENT: This item replaces the following oil filter parts: Ariens 20715100, Husqvarna 531307392, Kohler 25 050 27, 25 050 27-S, 25 050 33-S, 25 050 34-S, 52 050 02, 52 050 02-S, 52 050 02-S1..
  • KOHLER ENGINE COMPATIBILITY: A genuine replacement engine oil filter for your Kohler engine, this part fits the following Kohler engine models: CH11-CH25, CV11-CV22, M18-M20, MV16-MV20 and K582..
  • FILTER SPECIFICATIONS: This oil filter 2-pack measures 8.54 x 3.66 x 3.27 inches and weighs 0.95 pounds. Thread 3/4"-16 OD 3" Height 3 7/16" Micron 29. 8-11 psi pressure relief valve anti-drain valve..
Check Stock

Replacement Hose Kit for Moen Pullout Kitchen Faucets 159560 Hose Replacement Compatible withHose Service Kit for Moen Pullout Style Kitchen Faucets

  • 【COMPATIBILITY】This 1219935-BC faucet hoses compatible with Kohler Pull Down Kitchen Faucets with DockNetik Magnetic Docking System. Equal to replacement hose part K-1219935-BC or K-1304674-BC..
  • 【SPECIFICATION】Length of the pulldown hose: 68 inches.
  • Diameter of the faucet hose: 0.5 inches. Easy to replace Kohler replacement parts pull out hose. Suitable for Kohler kitchen pull down faucets (Simplice/Graze/Sensate/Bellera/Artifacts)..
  • 【HIGH QUALITY】Durable nylon wrapper material and brass metal connector ensure high quality of pull down spray hose replacement. High value replacement hose kit for Kohler kitchen faucet parts..
  • 【SIMPLE INSTALLATION】Pull-down faucet hose is easy to install. Just detach the old hose fittings and attach new hose fitting with output port. It’ s exactly the same one that needed to be replaced for Kohler faucet repair kit..
  • 【LEEK FREE】This kitchen faucet replacement hose is more durable, made of durable nylon wrapper, preventing your kitchen faucet sink from leakage..
Check Stock

Kohler GP89825 FLAPPER

  • Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo.
  • 2" flapper compatible with Portrait one-piece toilet 3357.
Check Stock

2 Pack Toilet Flapper 2 Inch Toilet Tank Flapper Replacement Compatible with Kohler Flapper with Float Used in Various 2-Piece Toilets-Blue Color

  • 1.High Quality Material Construction: Constructed of a durable resistant rubber and promote product longevity..
  • 2.Toilet Flapper Replacement: Replaces existing broken floats compatible with KOHLER toilet.
  • 3.Easy to Install: For use with assorted 2-piece toilets and coming with float, chain and hook..
  • 4.Suitable 2-inch Flapper: 2 in. flapper with a float used in various 1.6 GPF 2-piece toilets.
  • 5.Fit for Various Toilet Models: Compatible with KOHLER models as follows: well worth, Revival, Iron Works..
Check Stock

Kohler Toilet Flapper Replacement, 2 Pack Kohler Toilet Tank Parts Replaces Parts 84995 and 1000490 with Chain Hinges and 2 Plastic Buoys Ullnosoo for Water Saving Red

  • Toilet flapper replacement for kohler is compatible with San Rafael(3466, 3467, 3384), Rialto(3386), Rosario(3434), Ankara(14230), Fables and Flowers(14224), Laureate(14291), Prairie Flowers(14290-WF), Revival(3360, 3612). Please check your toilet model carefully before ordering..
  • The toilet flapper is made of high-quality rubber, and the flexible rubber valve provides a tight sealing ring to prevent water leakage. Completely fit, and the flushing ability is also significantly improved. The connecting chain is made of stainless steel, which is durable and not easy to rust, so as to keep the water clean..
  • Easy to install and use, just turn off the water supply, remove the old leakage flapper, attach new flapper to clips and fasten chain to flush lever with hook, and turn water on. The attached white buoy helps to see the water level clearly. You can easily repair a leaking toilet yourself without calling a plumber..
  • Package includes 2pack replacement toilet flappers with hinge and 2pack 50mm white flap chain buoys. There are always spare parts for the 2-pack, which is convenient for you to replace without going to the hardwa....
Check Stock

Korky 2011BP Hinge Flapper For Kohler Toilet Repairs - Replaces Kohler Parts 84995 and 1000490 - Made in USA

  • FITS SPECIFIC KOHLER 1-PIECE TOILETS - Replaces Kohler number 84995 and 1000490 (not compatible with 2-piece Kohler toilets).
  • The Hinge Flapper works with the following Kohler toilet models and tank numbers, Ankara (14230), Fables and Flowers (14224), Laureate (14291), Prairie Flowers (14290-WF), San Raphael (3466, 3467, 3384), Revival (3360, 3612), Rialto (3386), and Rosario (3434).
  • QUICKLY FIX running and leaking toilets and eliminate costly water waste.
  • MADE IN USA - Proudly made in America and backed by a 5 year warranty.
  • EXCLUSIVE LONGEST LASTING red rubber resists chlorine, bacteria, city water treatment, hard water, and well water.
  • MADE OF FLEXIBLE RUBBER for a tight seal on most flush valves.
  • EASY TO INSTALL, the 2011BP includes: (1) Flapper and (1) Stainless Steel ChainDescriptionThe Fits Kohler Hinge Flapper is designed to fit Kohler Hinge-Style parts 84995 and 1000490. The exclusive longest lasting red rubber resists chlorine, bacteria, city water treatment, hard water, and well water. The Hinge Flapper works with the following Kohler models: Ankara (14230), Fables and Flowers (14224), Laureate (14291), Prairie Flowers (14290-WF), San Raphael (3466, 3467, 3384), Revival (3360, 3612), Rialto (3386) and Rosario (3434). Flapper not compatible with ....
Check Stock

Kohler 87115-CP Left Trip Lever Service Kit, Polished Chrome

  • Left replacement trip lever kit for Kohler toilets.
  • Made with premium materials for enhanced durability.
Check Stock

Keeney Mfg. Co. Toilet Repair Kit

  • Complete Package - Contains all the parts needed to completely upgrade toilet while saving up to 38% more water..
  • Adjustable - Toilet fill valve can be easily adjusted from 8” to 13” to fit most toilets and available with 2” flapper..
  • Fits American Standard, Kohler and other toilets..
  • Easy to Install - Detailed step-by-step instructions included with helpful graphics and suggested helpful tools for a successful installation..
  • Pack Includes: (1) flush valve, (1) tank-to-bowl gasket, (3) 5/16" x 3" corrosion-resistant bolts, (6) corrosion-resistant washers, (6) rubber washers, (3) hex nuts, (3) wing nuts, (1) adjustable fill valve assembly, (1) flexible refill tube with clip, (7) water-saving caps, (1) 2" toilet flapper with chain, (1) flush lever.
Check Stock