Top Kreg Miter Fence

Table Saw, Mini Polisher, Benchtop Buffer Grinder, Polishing Engraving Carving Sanding Cutting, for DIY Jewelry Lapidary Gem Rock Woodworking (D.Woodworking Table Saw 10000RPM)

  • [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
  • [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
  • [ACCESSORIES INCLUDED] 5 blades (woods, aluminum, scrolling, ceramic tile, steel) rip fence, miter gauge, dust extraction port, and blade grip. Sets up in seconds to cut wood, metal, tile, aluminum or plastic..
Check Stock

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Metabo HPT Sliding Compound Miter Saw | 12-Inch Blade | Double Bevel | Laser Marker | 15-Amp Motor | 5 Year Warranty | C12RSH2S

  • AWARD: Rated Best Miter Saw for the Money for Pros by Pro Tool Reviews 2022.
  • MOTOR: Powerful 15 Amp motor to tackle tough cutting jobs with ease.
  • LASER: Laser marker system from Metabo HPT increases cutting accuracy.
  • FENCE: Large sliding fence raises fence height to 5.125 In. to cut up to 7.5 In. crown molding vertically.
  • MITER: 0-57 degree miter angle to the right and 0-45 degree to the left for flexibility.
  • BEVEL: 0-45 degree bevel angle range to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place.
  • SCALES: Positive stops and indications on the miter and bevel scale, for easy to read measurements and quick settings.
  • HANDLE: Vertical handle with soft, vibration reducing elastomer grip adds comfort and control.
  • SLIDE: Compact slide system allows the saw head to slide along fixed rails, for zero clearance.
  • WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty.
Check Stock

WoodRiver Snap-Set Miter Gauge Fence Combo with Flip-Stop

  • Positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and 90° in both directions.
  • Adjustable miter bar fits snug inside standard 3/4" x 3/8" miter slots.
  • 17-1/2"-long anodized aluminum fence rail adjusts along miter gauge head.
  • Flip-stop adjusts along the fence for repeatable accuracy - Improve safety and accuracy on the table saw and the router table.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock

JessEm 07150 Mite-R-Excel II Miter Gauge

  • DESIGNED FOR ACCURATE CUTS: Mite-R-Excel II Miter Gauge features nine miter detents and a spring-loaded indexing pin to ensure accurate cuts at the most common angles.
  • ADJUSTABLE FLIP STOP: Features adjustable flip stop accommodates up to 3/4-inch thick sacrificial fence.
  • EXTENSION: Fence extends from 20 to 36 inches to accommodate larger work-pieces when cutting.
  • COMPATIBILITY: Fits standard 3/4 x 3/8-inch miter slot and features laser-engraved angle measurements for accuracy.
  • MATERIAL: CNC-machined anodized aluminum components and Swiss-turned stainless steel parts. The guide bar made from Sheffield steel.
Check Stock

3-1/2\ To 4-1/2\ Universal Fence Clamp 2 Pack

  • Our 525 Large Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 10" wide. Heavy duty 1/2" phenolic base (15-3/4" x 15-3/4") will not distort from clamp pressure..
  • Features one 500 lb. Outboard Toggle Clamp and two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 24” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Worx WX572L 5.5 Amp BladeRunner Portable Electric Table Top Saw

  • [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
  • [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
Check Stock

Makita XSL08Z 18V x2 LXT Lithium-Ion (36V) Brushless Cordless 12" Dual-Bevel Sliding Compound Miter Saw, AWS Capable & Laser, Tool Only

  • Stainless-steel miter detent plate of 12-inch miter saw blade comes with 14 positive stops.
  • The mitre saw features the precise miter system and machined base fence support.
  • Tall sliding fence of DEWALT miter saw supports 5-1/2-inch base vertically.
  • Bevels 0 degree - 48degree to the left and 0 degree- 3degree to the right. Tool height-15 inch.
  • 2-inch x 8-inch dimensional lumber cross cut capacity at 90 degree and 2-inch x 6-inch dimensional lumber at 45 degree.
Check Stock

Router line Storage Box Power Cord Socket Sorting Box Set-top Box Rack

  • Our 526 Medium Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locatons for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (11-5/8" x 11-3/4") will not distort from clamp pressure..
  • Features two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

DWE7402DI Dado Throat Plate, Table Saw Parts Insert Accessories Replacement for 10-Inch Portable Table Saw DEWALT DWE7490, DWE7491 Versiones

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

Benchtop Router Table with 1-3/4 HP Router

  • A keyhole slot in the table accepts the quarter-turn fence lock, and allows the fence to be removed easily for freehand routing operations.
  • Table comes equipped with a combination miter-gauge/T-track to accept a miter gauge.
Check Stock