Top Kreg Miter Gauge System

INCRA MITEREXPRESS Miter Express

  • If you own a miter gauge - any miter gauge.
  • This sled is a sliding, miter-cutting platform that fully supports and controls your work piece throughout the cut.
  • Miter gauges drag your board across the table, a sled slides the work piece giving more support and control creating better, more consistent cuts.
Check Stock

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw Fence Bar – Table Saw Gauge 18 Inch

  • MAKE ACCURATE CUTS: The DCT | Table Saw Miter Fence with Miter Bar Gauge & Flip Stop offers safety and accuracy when cutting or sanding precise,....
  • USE YOUR TABLE SAW: 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact....
  • NO MORE PLAY: 18-inch (45.7cm) long fence bar has 8-inch (20.3cm) usable length after fence starts.
  • Bar is 3/8-inch (9.5mm) thick x 3/4-inch (19mm)....
  • BUILT TO LAST: Flip stop slides effortlessly along the fence and locks in place with the plastic tightening knob for quick adjustment while the flip....
  • PACKAGE CONTENTS: Table saw accessories package includes (1) table saw precision miter gauge, (1) fence, (1) flip stop, and necessary saw miter gauge....
Check Stock

Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc

  • If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs..
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used..
  • To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head..
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8....
Check Stock

Milescraft 7334 Safety Bundle - Includes Feather Board, Push Stick, and FREE Grabber push block. Ideal for use on router tables, table saw, jointers, and even band saws , Yellow

  • ❤ The table saw miter gauage all-aluminum guide rod and all-aluminum baffle can be modified and expanded..
  • ❤ 【Miter gauge cuts accurately】Loosen the knob to quickly adjust the angle, which can be used for precise angle cutting..
  • ❤ 【The table saw miter gauge is easy to operate and safe to use】. The miter gauge can adjust the angle adjustment knob according to the angle of the object to be cut,.
  • ❤ 【Table saw miter gauge can cut objects of different shapes and sizes】..
  • ❤Perfect for Wood Cutting Projects: Can be used on table saws, bandsaws, router planers, lockstitch machines. If there is a product quality problem, any problem, we can replace it at any time (please see the picture size) and its slideshow.
Check Stock

Rockler 36'' Miter Track - Miter Slot Fits 1' x 1/2' Deep Dado & Accepts a Standard 3/4' x 3/8' Miter Bar – Premium Grade Anodized Aluminum Miter Track Slot – Comes Pre-Drilled, Countersunk w/ Four Holes

  • Rockler 36'' Miter Track Bar: Our 36” inch miter slot track expands the use of the router table by providing the use of many sleds, clamps, jigs, and other woodworking devices..
  • Perfect Application: Set up your jigs, fixtures, and shop-made router tables for a perfect smooth-sliding miter gauge. This is the ultimate table saw miter track to build your own custom table saw or router table..
  • Perfect Size: The track fits into a 1" x 1/2" deep dado and accepts a standard 3/4" x 3/8" miter bar. Adjusts for perfect sliding action in any standard miter gauge track with just a twist of the wrist..
  • Durable Material: Our woodworking jig miter slider is constructed of 100% aluminum for excellent durability without the weight..
  • Easy Install: For fast, trouble-free installation, the miter slot gauge comes pre-drilled and countersunk with four holes for #6 mounting screws (not included)..
Check Stock

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

  • When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts..
  • The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
  • Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simpl....
Check Stock

Genuine Ryobi 089037007707 Miter Gauge Assembly Fits RTS10

  • ...ich is more convenient to insert into the slot hole and fix the seat. The miter gauges are flat without burr, secure, and hands-free..
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for router tables and jointers. Miter gauge fence system is currently a must-have for every family..
Check Stock

Skil 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System

  • Hydro lock water containment system keeps water contained near the blade and reduce clean-up time.
  • Sliding side extension provides support for tiles up to 18 x 18-inch.
  • Aluminum table top is a durable, rust-resistant surface.
  • Adjustable rip fence with miter gauge for accurate straight and miter cuts.
  • Bevel cuts tile at 0, 22.5 and 45 degrees, giving flexibility for different cut types.
Check Stock

POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” Multi –Track Fence with 27 Angle Stops

  • Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop.
  • Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results.
  • High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right.
  • Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts.
  • Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.
Check Stock

SKIL 7-Inch Wet Tile Saw with HydroLock Water Containment System and Replaceable 7\ Segmented Diamond Blade (3550-02 & SPT4004)

  • Hydro lock water containment system keeps water contained near the blade and reduce clean-up time.
  • Sliding side extension provides support for tiles up to 18 x 18-inch.
  • Aluminum table top is a durable, rust-resistant surface.
  • Adjustable rip fence with miter gauge for accurate straight and miter cuts.
  • Ideal for cutting concrete, brick and blocks.
Check Stock

INCRA Miter Combo Value Pack

  • Dock & Lock the included INCRA Miter Gauge in Seconds.
  • Removable t-slot retaining clips & adjustable miter bar.
  • GlideLOCK Miter Bar - The Miter 1000SE's 6 expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws....
  • Special Edition Telescoping INCRA-LOCK Fence.
Check Stock

Miter Bar, 1Pcs Durable In Use Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Wood Working Tool Suitable for Jigs Fixtures Sleds Router Tables and General Woodworking, 300 mm / 11.81 inch

  • Wide Applications : This is a miter bar usually used in table saw woodworking works, for building various jigs on your table saw, like miter sleds etc..
  • Convenient to Use : Universal threaded mounting holes for convenient use. Includes plans for a wide variety of shop-made jigs and fixtures. Adjustable stainless steel runner for perfect sliding action.
  • Good Performance : Adjusts for perfect sliding action in any standard miter gauge slot with just a twist of the wrist. Locks securely in any standard miter gauge slot with another twist of the wrist.
  • Useful and Practical : For building various jigs on your table saw, like miter sleds. Includes threaded mounting holes and hardware for easy attachment to any application.
  • Fine Quality Aluminium Alloy Material : Made of high quality aluminium alloy, this miter bar is of strong strength and reliable durability for several year using without abusing.
Check Stock