Top Laboratory Consumable Product

YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Power Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved

  • Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life..
  • Built-in Post Flow：When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life..
  • Powerful Cutting Ability：10-55 A DC output, 1/2”ideal clean cut and 3/4”maximum severance cut under 220/240V，60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • Lightweight and Portable：Allows for connection to 110- or 220-volt receptacles without tools，Portable in the shop or at the job site—at 13 lb the shoulder strap allows the end user to easily move from location to location.
  • Added Safety：Certificated by ETL，Automatic compensation for voltage fluctuation, over current protection, over load protection,temperature control.
Check Stock

LabEdit Portable Vacuum Pressure Pump with Tubing and Connectors

  • LabEdit lab vacuum filtration pump is working for the Laboratory Vacuum Filtration Distillation Apparatus to filter the liquid quicker which can help to save a lot time.NOTE: The pump doesn't pull a high vacuum needed for much vacuum applications. It is intended to lower the pressure in a vacuum filtration flask..
  • The working voltage of the laboratory filtration pump is 110-120V and the working HZ is 60HZ so It is made for USA market. (If you want to use this product in other country, please check the working voltage and working HZ to make sure whether it is suitable for the country you want to use for or not..
  • There are three different tubing for connecting to different size nozzle of Laboratory Vacuum Filtration Distillation Apparatus. The three different size hoses are one piece 4mm ID x 5mm OD hose.
  • one unit 6mm ID x 9mm OD. These three type hose could fit most of different size filter bottle nozzle..
  • The transparent tubing need to be pluged to the lab vacuum filtration and connect the black silicone tubing to the lab vacuum filtration and then turn the lab filter pump on in order to let the lab vacuum pump work.(the yellow tubing can be connected to the black tubing in order to connect to big size nozzle of laboratory....
Check Stock

LianDu Drying Rack 52 Pegs Lab Laboratory Supply Pegboard Glassware Drying Rack Benchtop Wall-Mount 52 Detachable Pegs Lab Drying Draining Rack Cleaning Equipment (52 Pegs)

  • 【HIGH QUALITY DRYING RACK】This Laboratory Drying Rack adopts environmentally friendly PP material, and the laboratory drying rack is anti-corrosive and durable. 8 rows of nails, staggered. Wall mounting brackets are included..
  • 【GOOD DRAINAGE DESIGN】There is a tray hole and a water outlet hose at the bottom for better drainage and leakage prevention. Helps to dry tubes, beakers, flasks, glassware and other laboratory supplies..
  • 【MAIN PARAMETERS】Material: Polypropylene (PP), 52 detachable dry nails: 5"/125 mm long, 0.35"/9mm diameter, Built-in molded drain pan: 21" x 3.5" (530mm x 90 mm), The tray has holes for drainage and is fitted with a 30''/760mm vinyl tube, Rack (high x wide): 27'' x 21'' (685mm x 540mm), Size of the hanging nail: 125mm x 90mm x 90mm (5'' x 0.35'' x 0.35''), Product size: 700mm x 553mm x 127mm (27.5'' x 21.5'' x 5''), Package size: 28'' x 22'' x 7'', Shipping weight: 21lb..
  • 【EASILY WALL-MOUNTED】This drying rack has 52 pegs (each 5 inches long) for easy assembly and disassembly, and can be easily mounted on a wall or hung on a wall. Good drying rack for laboratory, medical, chemical, quality inspection, school, research institute, etc..
  • 【PACKAGE CONTENTS】2 x Laboratory Drying Rack (Note: This item can be mounted on....
Check Stock

Drying Rack 52 Pegs Lab Laboratory Supply Pegboard Glassware Drying Rack Benchtop Wall-Mount 52 Detachable Pegs Lab Drying Draining Rack Cleaning Equipment for Tube Beaker Flask Dry

  • 【GOOD DRAINAGE DESIGN】There is a tray hole and a water outlet hose at the bottom for better drainage and leakage prevention. Helps to dry tubes, beakers, flasks, glassware and other laboratory supplies.
  • 【HIGH QUALITY DRYING RACK】This Laboratory Drying Rack adopts environmentally friendly PP material, and the laboratory drying rack is anti-corrosive and durable. 8 rows of nails, staggered. Wall mounting brackets are included..
  • 【EASILY WALL-MOUNTED】This drying rack has 52 pegs (each 5 inches long) for easy assembly and disassembly, and can be easily mounted on a wall or hung on a wall. Good drying rack for laboratory, medical, chemical, quality inspection, school, research institute, etc..
  • 【MAIN PARAMETERS】Material: Polypropylene (PP), 52 detachable dry nails: 5"/125 mm long, 0.35"/9mm diameter, Built-in molded drain pan: 21" x 3.5" (530mm x 90 mm), The tray has holes for drainage and is fitted with a 30''/760mm vinyl tube, Rack (high x wide): 27'' x 21'' (685mm x 540mm), Size of the hanging nail: 125mm x 90mm x 90mm (5'' x 0.35'' x 0.35''), Product size: 700mm x 553mm x 127mm (27.5'' x 21.5'' x 5''), Package size: 28'' x 22'' x 7'', Shipping weight: 21lb..
  • 【PACKAGE CONTENTS】2 x Laboratory Drying Rack (Note: This item can be mounted on ....
Check Stock

Happymodel ELRS PP 2.4GHz RX SX1280 EXPRESSLRS Nano Long Range Receiver (EP1 RX)

  • Product name: Consumable Kit Pick Roller + Brake Roller Pickup Roller.
  • Compatible with fi-7160 fi-7260 fi-7140 fi-7240 fi-7180 fi-7280 fi-7300NX.
  • OEM code / Part NO: PA03670-0001 PA03670-0002.
  • What You Get:Pick Roller set + Brake Roller + Cleaning wipe + installation instructions.
Check Stock

NestEcho Laboratory Vacuum Filtration Pump for USA Market

  • Note: If you find the suction poor after receiving it, please contact me by email and I will replace it with a new one for you.NestEcho lab vacuum filtration pump is working for the Laboratory Vacuum Filtration Distillation Apparatus to filter the liquid quicker which can help to save a lot time.NOTE: The pump doesn't pull a high vacuum needed for much vacuum applications. It is intended to lower the pressure in a vacuum filtration flask..
  • The working voltage of NestEcho laboratory filtration pump is 110-120V and the working HZ is 60HZ so It is made for USA market. (If you want to use this product in other country,please check the working voltage and working HZ to make sure whether it is suitable for the country you want to use for or not..
  • There are three different tubing for connecting to different size nozzle of Laboratory Vacuum Filtration Distillation Apparatus. one unit 4mm ID x 5mm OD Transparent tube.
  • The tubing is flexible so lab vacuum filtration pump can be suitable for different lab filter bottle in the market..
  • The transparent tubing need to be pluged to the lab vacuum filtration and connect the black silicone tubing to the lab vacuum filtration and then turn the....
Check Stock

C&S 100214223 Sweet Corn Refill Squirrelog Backyard Feeder, 2 Count (Pack of 6), None

  • Squirrelogs produced with 100% edible log that contains sweet corn and roasted peanuts. More economical, easier to use and requires the squirrel to remain on the feeder resulting in more entertainment.
  • This patented product is 100-percent consumable.
  • One Squirrelog replaces 12 - 24 ears of corn.
  • Package Dimension: 14.8"L x 5.0"W x 5.0"H.
  • Includes six 2 packs of Squirrelogs, 12 total logs.
Check Stock

HYDDNice Laboratory Stands Support Laboratory Grade Metalware Set Lab Clamp Flask Clamp Condenser C

  • Comes with 1 laboratory support and 9 laboratory clips,standard set of laboratory stands, for your convenient experience..
  • 23.62"(60cm) steel rod length,solid black coated support stand base, provides a stable and safe support to your lab work..
  • The iron stand for fixing and supporting a variety of apparatus,usually used in filtration,heating experiment,a good laboratory tool kit..
  • Commonly used lab instrument used for physics and chemistry experiment..
  • Service: Customer satisfaction is the most important, if you're not satisfied with the product,please contact us by email on Amazon of "Ask a question" button,we'll solve it for you..
Check Stock

PUPPYOO Cordless Upright Vacuum Cleaner-WP511

  • 110W suction power, 2200 mAh battery capacity, 6.9lbs product weight, slim design, easy to use..
  • Adjustable Suction Modes–normal power for daily cleaning, high power for heavy dust area..
  • Motorized Ground Brush–Sweep and take in dust efficiently, 3 search lights in front, indicate dust in the dark..
  • Washable Components–Transparent dust cup, easy to take off and empty, all filtration parts are washable, no consumable material needed..
  • Two Year Warranty–If there is anything wrong with the cleaner, feel free to contact with us, we will solve the problem for you as soon as possible..
Check Stock

Honeywell Scanning MK7120-31B41-6 Honeywell, Ms7120 Orbit, Rs232 Scanner (Ms7120-41-3), Black, Mounting Plate (45-45619), 2.9M (9.5') Straight Rs232 Cable (59-59000X-3), Lev 6 Us Power Supply

  • Fujitsu Genuine consumable part from the manufacturer.
  • Pick Roller Set has a consumable lifespan for up to 250,000 sheets.
Check Stock

Hantek 20:1 Passive Attenuator for Pico 300v Max 10Mhz Passive Oscilloscope Signal Attenuator for Automotive Diagnostics Use,HT201

  • The HT201 has been designed to allow fuel injector and primary ignition waveforms to be measured using Hantek oscilloscope products..
  • Please note this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition..
  • Passive attenuator with 20:1 attenuation, if input a 20V signal, it can output a 1V signal.Because the signal is attenuated, by using this item, oscilloscope can measure voltage higher than its range(±20V).
  • 【What you will get】 1 x HT201 Signal Attenuation.
  • 【Please Note】 After receiving the product, please check whether it is damaged. If you have any questions, please contact us in time. This product is a consumable and needs to be replaced regularly. Once the product is used, the warranty is not allowed..
Check Stock

DONNGYZ Laboratory Glassware Drying Frames Hangers Rack in Grey PP 27pegs Wall Mount Desk Top Lab Science Supply Cleaning Equipment Pcs(US Stock)

  • ★This product adopts environmentally friendly PP material, and the laboratory drying rack is anti-corrosive and durable..
  • ★Helps to dry tubes, beakers, flasks, glassware and other laboratory supplies. There is a tray hole and a water outlet hose at the bottom for better drainage and leakage prevention..
  • ★This drying rack has 27 or 52 pegs (each 5 inches long) for easy assembly and disassembly, and can be easily mounted on a wall or hung on a wall.Good drying rack for laboratory, medical, chemical, quality inspection, school, research institute, etc..
  • ★Note: This item can be mounted on the wall or on the desktop. Strong PP structure. The sale of this product is not a toy and is for educational/laboratory use only. They are not suitable for children 12 years of age and younger..
  • ★Shipping Address and Distribution Logistics: Company has warehouses in California and New Jersey in the US, and We Ship FED and UPS carriers. Delivery time is 3-5 days. We have a Professional Customer Service Team to Reply You within 24 hours.If you have any Questions, Please feel free to Contact us.You Deserve the Best After-sales Service..
Check Stock