Top Lanzar Crossover Car Audio

Orion Ztreet 4 Channel Car Amplifier – Class A/B Stereo Power Amplifier 2500 Watt Max 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply Car Electronics Amp Audio Speakers Great for Subwoofers

  • ...plifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier for subwoofers exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 2500 Watts Car Amplifier has a power rating distribution as followed 280x4 RMS @2 Ohms, 50x4 RMS @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Crossovers- The Orion Ztreet Multichannel Car Amplifier for car audio subwoofers offers you the ease of connectivity by providing the feature of crossover. The 4 channel car amplifier provides you with options of high pass crossover of 50Hz....
Check Stock

Orion Ztreet 4 Channel Car Amplifier – Class A/B Stereo Power Amplifier 1500 Watt Max 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply Car Electronics Amp Audio Speakers Great for Subwoofers

  • ...plifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier for subwoofers exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 1500 Watts Car Amplifier has a power rating distribution as followed 200x4 RMS @2 Ohms, 40x4 RMS @2 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Crossovers- The Orion Ztreet Multichannel Car Amplifier for car audio subwoofers offers you the ease of connectivity by providing the feature of crossover. The 4 channel car amplifier provides you with options of high pass crossover of 50Hz....
Check Stock

Orion Ztreet 2 Channel Car Amplifier – Class A/B Stereo Power Amplifier 5000 Watt Max 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply Car Electronics Amp Audio Speakers Great for Subwoofers

  • ...plifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 2 channel car amplifier for subwoofers exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 5000 Watt Car Amplifier has a power rating distribution as followed 330x2 RMS @2 Ohms, 105x2 RMS @4 Ohms. The 2 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Crossovers- The Orion Ztreet Multichannel Car Amplifier for car audio subwoofers offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you with options of high pass crossover of 50Hz....
Check Stock

2-Channel High Power MOSFET Amplifier - Slim 800 Watt Bridgeable Mono Stereo 2 Channel Car Audio Amplifier w/ Crossover Frequency and Bass Boost Control RCA input and Line Output - Lanzar VCT2010

  • 400W RMS / 800W MAX POWER: The Lanzar 800 watt 2 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give....
  • FULL RANGE CROSSOVERS: This product features a low / high pass variable crossover for versatility and precise control by being able to fine tune your....
  • MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to....
  • SHORT CIRCUIT PROTECTION: This 2 ch amp is also equipped with a 2x30 amp maxi type fuse to protect the amplifier and the electrical system of your car....
  • SLIM SIZE DESIGN: Measuring only 10.63''W x 1.78''H x 7.48''L, this amplifier has a slim size design and comes complete with all required mounting....
Check Stock

Lanzar Upgraded Standard 6.5" 3 Way Triaxial Speakers - Full Range Sound w/ 200 Watts and 4 Ohms Impedance 2” Titanium Cone Midrange 65 - 20 kHz Frequency Response and 15 Oz Magnet Structure - MX63

  • 65 - 20 kHz FREQUENCY RESPONSE: Lanzar, standard 3-way car speaker system has robust 15 oz. magnet structure and frequency response that complete the package. Also, pack with 2'' titanium cone midrange and super piezo tweeter for sweet highs.
  • POWERFUL 200 WATTs: These 6.5" car speakers provide up to 200 watts of two-way sound because it's equipped with 15 oz. housed structure. It's all housed in a glossy black coated steel basket that looks great.
  • 4-OHM MIN IMPEDANCE: This triaxial car speaker has 4-ohm impedance rating that compensates the undersized wire found in many of today’s cars. Includes custom wire-mesh grills, wires and installation hardware for easy setup.
  • ALUMINUM VOICE COIL: Lanzar speakers are capable of 1” higher or elevated temperature strength and fatigue properties. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures.
  • MX63 TEMPLATE: Lanzar upgraded car speaker measures 72mm x 72mm with a mounting depth of 2.32''. The high-quality injection cones and non-fatiguing butyl rubber surround provide a strong foundation.
Check Stock

LANZAR HTG447 2000W Bridgeable 4 Channel MOSFET Car Audio Amplifier Power Amp

  • lanzar - htg447 - lanzar htg447 2000 watt 4 channel car digital amplifier amp 4ch 2000w.
Check Stock

Blaupunkt AMP1500M High-End 1500 Watts Monoblock Car Audio Amplifier/Amp +Remote

  • High-End 1500 Watts Monoblock Car Audio Amplifier/Amp +Remote Car Audio Mono-channel Amplifier / Amplifier Class: AB.
  • Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz -....
  • Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V.
  • Crossover Frequency: 40Hz - 250Hz / Crossover Slope (dB/oct): 12dB/oct.
Check Stock

Lanzar Upgraded Opti-Drive Pro 8” Coaxial Car Speaker - Powerful 1200 Watts 4 Ohms Paper Cone w/ 70Hz - 22 KHz Frequency Response and 55 Oz Magnet Structure Full Range Subwoofer - OPTI824

  • 70Hz - 22 KHz FREQUENCY RESPONSE: Lanzar, opti-drive pro car speaker has 55 Oz super strontium ferrite magnet structure and frequency response that....
  • POWERFUL 1200 WATTS: These 8” coaxial speakers provide up to 1200 watts of two-way sound because it's equipped with a 55 oz. housed structure. It's....
  • 4-OHM MIN IMPEDANCE: This full range subwoofer speaker has a 4-ohm impedance rating that compensates for the undersized wire found in many of....
  • CCAW VOICE COIL: Lanzar speakers are capable of 1.5” higher or elevated temperature strength and non-fatigue properties. It will increase....
  • SIZE: Lanzar upgraded car speaker measures 8.66'' with a mounting depth of 3.35''. The high-quality black paper cone and accordion cloth surround with....
Check Stock

Kicker 40TCWS104 10 600W 4 Ohm Complete Car Subwoofer Bass Package with Loaded Sub Enclosure Lanzar 1000W Monoblock Amplifier & 8 Gauge Wiring Kit

  • COMPLETE SOUND SYSTEM: Upgrade your car's sound system with this complete amplified bass package bundle that includes Kicker 10" single loaded....
  • CAR SUBWOOFER: The Kicker 4-ohm subwoofer boast 600 watts max power and 300 watts RMS.
  • CAR AMPLIFIER: Lanzar Mono Car Audio MOSFET Power Amplifier delivers 125 Watts RMS x 2 at 4 ohms to power your subwoofer.
  • SUBWOOFER BOX ENCLOSURE: This Kicker enclosure features a custom port design and is made with heavy MDF construction and thick black carpet.
  • AMPLIFIER WIRING KIT: 20-foot 8 gauge red power cable.
Check Stock

Precision Power SPL 4 Channel Car Amplifier – Class A/B Multichannel Amplifier 2000 Watt Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost Crossover MOSFET Power Supply for Car Speakers Sub Amp

  • Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 15-20KHZ, THD: < .05%, Bass Boost, SNR: 105DB, Remote Bass Knob, 2-way protection, hi/low pass crossovers and Input Sensitivity: 200mV-6V.
  • Class A/B – This multichannel subwoofer amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 2000 Watt Car Amplifier has a power rating distribution as followed 250x4 @2 Ohms, 180x4 @4 Ohms, 500x2 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Crossovers- The SPL Multichannel Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you with options of variable 60-1.2kHz 12db high pass crossover, variable 50-400Hz 12db low pass crossover ....
Check Stock

Lanzar Upgraded Opti Pro 6.5” High Power Coaxial Speaker - Powerful 400 Watt Peak 65Hz – 7 kHz Frequency Response 30 Oz Magnet Structure 4 Ohm w/ Glass Fiber Cone and Butyl Rubber Surround - OPTI6PM

  • 65Hz - 7 kHz FREQUENCY RESPONSE: Lanzar, 6.5” high power performance coaxial speaker has 30 oz magnet structure, vas at 11 liter and frequency....
  • POWERFUL 400 WATTs: This 6.5” full range speaker provide up to 400 watts peak power because it is equipped with 30 oz. housed structure. It's all....
  • 4-OHM MIN IMPEDANCE: This coaxial car speaker has 4-ohm impedance rating that compensates the undersized wire found in many of today’s cars.....
  • CCAR VOICE COIL: Lanzar speakers are capable of 1.5” higher or elevated temperature strength and fatigue properties. It will increase performance....
  • OPTI6PM TEMPLATE: Lanzar upgraded car speaker measures 6.97'' in overall diameter with a mounting depth of 2.95''. The high-quality glass fiber cone....
Check Stock

Taramp's Five-Way Electronic Car Audio Crossover System,Black,CRX5

  • Applications: Home Audio 5.1 bass, bass DIY，Car audio bass, bass DIY.
  • Power: 200W (applicable to 4-inch to 8-inch subwoofer)..
  • Low Pass Speaker Bass Subwoofer Crossover Filter for 8 Ohm or 4 Ohm.
  • Pure Bass Subwoofer Second-order Crossover Frequency Divider.
Check Stock