Top Large Diameter Boring Bar

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
For semi-finishing and finishing operations.

For use with BXA tool posts 250-200 or 250-222. 10-15" swing..
Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 3/4" tool with bushing, 1" diameter without bushing.

For use with AXA tool post 250-100 or 250-111. up to 12" swing..
Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 5/8" tool with bushing, 3/4" diameter without bushing.

...older are made of quality cemented carbide and tungsten steel.
The cemented carbide material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
cutting angle is 95 degree, cutting direction is right hand.
Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.

HIGH-QUALITY MATERIALS: The boring bar is made of high-quality manganese steel to improve durability and service life..
SCOPE OF APPLICATION: Boring bar for CNC lathes with 1/2 "boring head. It can be used for boring, round, end face, step hole, inner hole end face, cutting inner hole and annular groove on the outer circle, etc..
ACCURATE THREAD: The thread of the boring bar is accurate and can be tightly connected with the boring head..
EXQUISITE WORKMANSHIP: The connecting rod of the British boring head handle is very smooth, professional and practical appearance design, easy to use..
HIGH STABILITY: MT2 bracket is stable, accurate and high stability, very stable during work, and reliable tools..

...older are made of quality cemented carbide and tungsten steel.
The cemented carbide material makes the turning tool durable and adaptable.
Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
cutting angle is 95 degree, cutting direction is right hand.
Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.

2" Boring Head With R8 Shank.Head size: 2".Boring bar Hole: 1/2".
Cross Hole Dia: 1/2".Maximum Offset: 5/8".Thread: 1.5"-18.Graduations: 0.001/0-50.
A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting.
Packing including:1pcs 2" Boring Head, 1pcs R8 Shank, 9pcs 1/2" Carbide Boring Bar,3pcs Allen Wrench.

◆ UNIQUE: Boring Bar suitable for finishing and semi-finishing, good toughness..
◆QUALITY: Boring Bar Lathe high strength and hardness, durable in use, improved the surface gloss of the cutting pieces.
◆FUNCTION: Boring Bar Set suitable for machining steel, reduce the tool grinding cost and improve the cutting efficiency.
◆APPLICATION: Lathe Tools Set tightly impacted bolt, simple structure, often used for small hole machining..
◆GET: 2 Boring Bar( S12M-SDUCR07 + SDJCR1212H07 ) + 2 Wrench + 10 Carbide Inserts ( DCMT070204 ).

Shank Diameter: 5/8''. Overall Length: 8''. Min. Bore: 0.866''..
Boring from light roughing to finishing in small bores. Insert CCMT 32.51 Included & Key Included.
Accepts Inserts CCMT 32.51 and CCMT 32.52. Profiling bar for semi-finishing and finishing operations.
Bar hardness approximately 45HRC. Extreme gloss finish.
Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.

♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..