Top Large Push Pull Solenoid

uxcell DC Push Pull Type Solenoid Electromagnet, DC5V 18W 0.8N 10mm, Open Frame Type, Linear Motion

  • Pull push type, linear motion, plunger return, DC solenoid electronmagnet..
  • DC Solenoid Electromagnet mainly used in vending machines, transport equipment, office facility household appliance, mechanical, etc..
  • Solenoids of this category work externally through pulling pushing in plunger..
  • When energized, doing work through pulling pushing in plunger joined object..
  • Material:Metal,Electronic Parts.Frame size: 13*16.5*30mm (W*H*L).Plunger Bar Size:6x58mm.Mounting Hole Dia.:2.5mm.Cable Length:20cm.(Unit conversion: 1mm=0.0393iinch, 1cm=0.393inch).
Check Stock

Von Duprin 050240 6000 Series Solenoid Kit, 24 VDC (FS and FSE)

  • 【Dimension】- 20 x 26 x 39mm/0.78" x 1.02" x 1.53"(L*W*H).
  • 【Good design】- Pull Type, linear motion, frame type, plunger spring return, Low friction to ensure high efficiency and prolong life, 12V DC solenoid electromagnet..
  • 【Advantages】- Solenoid electromagnet has simple structure, small volume, high adsorption force.copper coil inside, has good temperature stability and insulation, high electrical conductivity..
  • 【Application】- DC 12V solenoid electromagnet widely used in vending machines, transport equipment, office facility household appliance, mechanical, etc game machine,Sorting machine,auto door lock,etc..
  • 【Noted】-As an actuating element of an automation equipment ,because the current is large, the single cycle can not be electrified for a long time, best operate time is in 30 seconds..
Check Stock

DORMEYER 1000-M-1 Solenoid, Open Frame, Pull, Continuous

  • Solenoid Type: Laminated Item: Solenoid Duty Cycle: Continuous Stroke Range: 1/8" to 1" Pull Force Range: 92.8 to 176.0 oz. Coil Volts: 120VAC Seated Amps: 0.48 Seated Watts: 19.0 Terminals: Solder Lug Coil Amps @ Max. Stroke: 6.50 Mounting Holes: 2 x 1-5/8" Gravity Value: 5.92 oz. Pull @ 1/2 In. Stroke: 13.0 oz. Pull @ 1/8 In. Stroke: 65.0 oz..
  • Pull @ 1/4 In. Stroke: 35.0 oz. Pull @ 3/8 In. Stroke: 20.0 oz. Pull @ 5/8 In. Stroke: 5.0 oz. Width: 2-1/16" Pull @ 1 In. Stroke: 1.0 oz. Length: 2-1/2" Pull @ 3/4 In. Stroke: 3.0 oz. Depth: 2-1/16" Coil Resistance: 14.9 ohm Country of Origin (subject to change): United States.
Check Stock

1\ Bore X 24\ Stroke Double Acting Pneumatic Cylinder (Roughly 1\ Bore 20MM)

  • These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
  • You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
  • Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
  • These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
  • This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..
Check Stock

mistcooling 250 PSI Misting Pump

  • 250 psi pump quiet operation 35Db solenoid valve – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
  • Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
  • Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter th....
Check Stock

NOS 4An Purge Valve Kit - Black

  • Releases a large white cloud for impressive nitrous display and improved system performance.
  • Includes solenoid, filter, activation push button, fittings, wiring, and instructions.
Check Stock

Industrial Misting System - Patio Misting System - 250 PSI Misting Pump, Stainless Steel Tubing - For Residential. Commercial, Outdoor Restaurant and Industrial Misting Application (20 Nozzle System)

  • Base 20 Nozzle Stainless Steel Mist Kit Includes: 250 psi mid pressure pump with built-in solenoid and filtration 38ft Stainless Steel tubing for push lock (Pre-cut 2ft sections) 22ft UV coated Flexible 1/4" feed line 20- Nickel Plated Push Lock Misting Tees 1- End plug 2- Nozzle plugs 20- Nickel plated brass/stainless steel Nozzles (0.012") Stainless Steel Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
  • Misting Pump Features : Stainless Steel Mist Line Whisper quiet operation Built in Solenoid Valve Built in Filtration Outdoor Enclosure Wall Mountable Steel Enclosure Max Pump Pressure 250 Psi 110v AC Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable high pressure push lock fittings Stainless Steel Clamps.
  • Applications Include : Residential Patio Misting Greenhouse Humidification Commercial Outdoor Cooling Outdoor Restaurant Misting Industrial Misting.
  • Do it yourself misting system, easy to install, with Push to Connect Nickel plated fittings, rated for 1800 PSI..
Check Stock

3-Way Solenoid Valve 3/8\ with All Fittings (12-Volt)

  • These have an air inlet, an air outlet and an exhaust port..
  • Allow a much greater amount of air to flow through the valve and into your prop. Great for props that need a lot of lift or a quick lift..
  • Can be used with Single-Acting Cylinders with or without an air hole because the air can escape back through the solenoid and out the exhaust port (if open)..
  • Allow you to control the exhaust coming out of the solenoid if you want to slow down the action on the tail end of your prop's motion..
  • Has two 3/8" air ports and one 3/8" breather port. Comes with: 3/8" 3-Way Solenoid (2) 3/8" Male Straight fittings with 3/8" push-in female (1) Brass Breather Vent Available with 12-Volt, 24-Volt, or 110-Volt Flying Lead.
Check Stock

Jamma 60-in-1, Mame, Retro PI Classic Arcade Multigame-Multicade Arcade Cocktail Game Control kit

  • *ARCADE1UP* Specially designed for Arcade1up Pinball cabinets. Perfectly fit for Arcade1up Pinball cabinets. Easy installation with just a screw driver. No effects on original design..
  • *SWITCH PINBALL* Enjoy Switch Pinball games on Arcade1up Pinball cabinets..
  • *AMAZING JOYSTICK*The design of joysticks makes itself perfectly fits for FTG/STG/TAB games etc..
  • *Arcade1Up Game Experience on SWITCH* Enable you to get all the Arcade1Up Gaming experience while playing SWITCH Pinball game on it. Feel the Arcade1Up magical design such as the incredible feeling of Push Pull solenoid Electromagnet..
  • *WARRANTY* All IntecGaming's products are covered by 1 year warranty..
Check Stock

Patio Misting Kit - 250 PSI Patio misting System - Made in USA Pump - Up to 40 Nozzles Misting System - for Residential Misting System - Stainless Steel Misting Nozzles (10 Nozzle System)

  • {SYSTEM COMPONENTS} Base 10 Nozzle Mist Kit Includes: 1- 250 psi mid pressure pump with built-in solenoid and filtration.
  • 10- cleanable brass/stainless steel Nozzles (0.012").
  • Mounting Clamps and all necessary fittings required for easy D-I-Y installation.
  • {MADE IN USA PUMP} Whisper quiet operation Built in Solenoid Valve.
  • Outdoor Enclosure Wall Mountable Enclosure Max Pump Pressure 250 Psi 110v AC (Available in 12vdc and 220v on request) Supports up to 30 nozzles Cleanable Brass-Stainless Steel ultrafine misting nozzles Reusable push lock fittings.
  • {APPLICATIONS) Residential Misting, Industrial Cooling, Warehouse Misting, Outdoor Restaurant.
  • {FITTINGS FEATURES} Fittings are Brass /Nickel Plated Fittings - to Make your Misting System more durable.
  • {SUPPORT} 24/7 Support from mistcooling Texas. MC12080-MC12092.
Check Stock

Pair of DDM Tuning Bi-Xenon HID D2S Retrofit Projectors V2 3in Lens LHD W/DDM Slim 55W HID Kit DDM 55W,6000K

  • The DDM Tuning D2S Projectors are what retrofits are made for. Each projector is hand picked to ensure the highest quality..
  • Beam Pattern: The V2 D2S Projectors have a wider beam pattern than the V1 D2S Projectors to give more output on the sides of the road below the....
  • Solenoid: We use a large (strong) magnetic solenoid that will pull the high beam shutter all the way to allow more light output when on high beams.....
  • Mounting: H4 plates are included at no charge to allow for easier installation. Comes with rubber gaskets to properly seal the projector in place..
  • Kit includes: 2 x D2S Projectors Mounting Hardware (H4 plates) Gasket 2 x HID Ballasts 2 x HID Bulbs 2 x AMP to D2S Adaptors. Projector Size: Width:....
Check Stock

Bitray DC 12V Magnetic Solenoid 5N Push Pull Open Frame Solenoid Electromagnet, Actuator Linear Motion 6mm Stroke Push Pull Type JF-0730B

  • Package Content : 1 x Electromagnet Solenoid Lock.
  • Easy to Install - It's with simple structure,and it can save the energy and the time during the installation for you..
  • With Low Use Cost - This electric lock use instantaneous power, can save power for you. So it can save money for you..
  • Small Size and Light Weight - It just takes up a small space which is perfect lock to be used for the small box or small cabinets, such as deposit box, cabinets, safes etc..
Check Stock