Top Laser Engraver Machine

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
Check Stock

Laser Engraver SMERNIT S2, 40W High Accuracy Laser Engraving Machine with LED Touchscreen, 5W-5.5W Output Power Laser Engraver and Cutter for Wood, Metal, Acrylic, Leather

  • 【Higher Accuracy Engraver Machine】Smernit S2 adopts 5-5.5W output power laser module can cut 3mm wood board in one time . With 0.08mm ultra-fine compressed spot allowing laser engraver for wood and metal to engrave and cut all details of design drawings..
  • 【Magnetic Protective Cover &Knob Stable Focusing】Easy to install and remove magnetic protective cover can filter 98% of UV light to protect your eyes, Smoke exit for less impact on engraving material.The laser module can be easy adjusted up and down to fit various thicknesses of materials and adjust the focus easily and quickly through knob..
  • 【Upgraded Color Touchscreen Display】Smernit S2 2022's newly upgraded color touch screen display makes offline operation more convenient. Support USB link, Wifi link, SD card three link methods, support NC, BMP, JPG, PNG, DXF and other image formats..
  • 【Extensive Compatibility &Wide Applications】Smernit S2 Laser engraver can be compatible with various mature engraving software(LaserGRBL&LightBurn) support Win XP / Win 7 / Win 8 / Win 10. Large engraving range(400*400 mm) to meet various DIY needs.Smernit LE-4....
Check Stock

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

  • Double Compression Spot Coupling Technology: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
  • Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
  • Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
  • The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, supp....
Check Stock

Tool Engraving Machine On Off 01 Industry Sound, Sounds, Effect, Effects [Clean]

  • 【Double Compression Beam Technology to Achieve True 10w Output Power】A10 pro laser cutter and engraver machine, With 50W Machine Power, 10W Laser Module Output Power. Fixed Focus Compressed Spot, spot smaller and the energy more concentrated, and more refined engraving products..
  • 【Support offline engraving】The A10 pro 50W laser engraver is equipped with a terminal control panel, which supports offline engraving, so that you can engrave anywhere, anytime without the restriction of a computer..
  • 【Perfectly compatible system】The laser engraving machine can be compatible with LaserGRBL (free, support Windows) or LightBurn (paid, support Windows, Mac OS and Linux). Engraving file format support: SVG, NC, DXF, BMP, JPG, PNG, etc..
  • 【Assembly is quite easy】Everything is neatly packaged and the smaller pieces are pre-separated into steps that match the instructions.Each assembly step has its own separate package of fittings used in that step. all parts are marked with steps no there is no confusions. The entire setup was about 30 minutes..
  • 【Quality Assurance and After - Sale Service】We have a professional customer service team. We provide the customers a year warranty , parts replacement and permanent technical support. Your concerns are a....
Check Stock

LaserPecker L1 Laser Engraver, Mini Engraving Machine Portable Laser Etcher, Compressed Spot High Precision Grabadora Laser with Protective Goggles - Black

  • The Most Useful Mini Laser Engraver: Do you want to create inspiration anytime at home? Or want to make exclusive gifts for your friends and family during the holiday season? Or want to customize your logo in small batches? LaserPecker L1 Laser Engraver meet your needs!.
  • LaserPecker L1 Laser Engraver: 0.3mm Compressed Spot, engraving range: 3.9″*3.9″. Focal length: 7.5″(the distance from laser unit to the surface of engraved item). Support power supply through 5V 2A mobile power supply. COULD ENGRAVEING: Wood, Kraft paper, Leather, Fruit, Felt etc. COULDN’T ENGRAVEING: Metal, Glass, plastic, stone..
  • Compact Design: LaserPecker L1 Engraving Machine is very small size, only 2.6″ * 2.4″ * 2.1″, Weight 6 oz, can be mastered in one hand, it is a real handheld laser engraving machine. Perfect for entry-level creators, you can do a lot of inspiration without expensive prices and taking up less space..
  • Durable and Safe: Laser etching machine with high quality 1.6W laser head make durablity, better stability and long working time. Multiple safety features such as Working warning alert, Displacement automatically stops when engraving, Overheat shutdown, Enter password before work will keep you safe from accidents. Safe Certification: CE, FCC, FDA, R....
Check Stock

Ball Vise Engraving Setting Tool 360°Rotation Professional Ball Vise 30 PCS Attachment Jewelry Engraving Block Tools Standard Block (3inch)

  • ...lity of the machine to cut and 36W is the machine power of the laser machine.
  • Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.08mm ultra-fine compression spot, resulting in detailed and vivid engraving images.
  • All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 Laser engraver more stable with less noise and 3 lifetimes longer than similar products.
  • Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 6mm wood board and a 3mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
  • Wide Compatibility - xTool D1 supports LightBurn and Laserbox Basic (available on mobile devices). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
  • Make Your Creativity a Breeze - xTool D1 5W is the ideal and user-friendly laser engraver for beginners to start off with, like making greeting cards, patterns-engraving, and your personal artwork.
  • Eye Protection Design - The anti-UV filter acrylic on the laser module filters 97% of UV rays to protect your eyes and those around you.
  • Professional Support - We have a professional US technical team and support website to solve all your problems within 24 hours.
Check Stock

xTool D1 36w Higher Accuracy Laser Engraver with Material Box, 5w-7.5w Laser Cutter and Engraver Machine, Support LightBurn, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Paper(17'x15.98')

  • 【Finer Details by 0.08*0.08mm Ultra-fine Compression Spot】xTools D1 is the Best DIY laser cutter and engraver machine for beginners/business starter/ hobbyists/designers/home-makers/professionals. It adopts the latest high power 5-7.5W laser module with 0.08mm ultra-fine compressed spot, cutting speed up to 10000mm/min, can cut 8mm wood board and 3mm acrylic in one pass, directly engrave uncoated stainless steel.
  • 【Higher Accuracy Cutter and Engraver Machine】The all-steel wheel and shaft and synchronous belt enable motion accuracy of up to 0.01 mm and repeatable positioning accuracy of less than 0.02 mm, allowing the xTool D1 laser engraving machine to engrave and cut all details of design drawings 1-to-1 with high silence throughout. It maintains a perfect engraving effect even after long times use.
  • 【All in One Kit】These xTool D1 kit comes with the xTool D1 laser cutter and engraver machine, rotary attachment and laser material Box. With a rotary attachment, xTool D1 can engrave diameter cylinders as small as 3mm. The laser material box include 10 kinds of popular materials, including metal, wood, rubber, etc. You can start your creation quickly with xTool D1 Rotary attachment and Materail kit.
  • 【Wide Compatibility and Multiple Connection W....
Check Stock

Comgrow Laser Engrave Enclosure with Vent, Laser Engraving Machine Protective Cover with Eye Protection, Insulates Against Fumes and Odors for Laser Cutting Enclosure Tent for COMGO Z1

  • Great Compatibility: Comgrow laser engraver protective cover has a super space, Internal working size 620*620*300mm,24.4*24.4*11.81inches.It’s fit for COMGO Z1, Ortur Laser Master 2/Laser Master 2 Pro, Sculpfun s9,xTool D1,ATOMSTACK A5/A5 Pro/A5 M40/A5 M30, Twotrees Totem 2.5/Totem 5.5/Totem S, etc..
  • More secure during engraving: The interior uses flame retardant material, can effectively stop burning. It can isolate the smoke and odor generated during the laser engraving process.
  • Eyes protection design: laser engraving machine enclosure can diminish the blue light produced by laser engraving, protecting your eyes..
  • Quick and Easy Installation: Folding storage, easy to carry and assembly, stainless steel bracket, the overall more stable..
  • Enclosure Advantage: Sound insulation and dustproof. The cover can effectively block the noise emitted by the engraver during laser engraving, create a comfortable engraving environment. It can also be used as a dust cover to prevent the engraver from being covered by dust and is easy to store. Simply wipe it with a damp cloth when cleaning. Protects laser engraver from damage and helps contain stray fumes..
Check Stock

xTool D1 Laser Engraver, 5W Ultra Accurate Laser Engraving Machine, 36W DIY Laser Cutter Support LightBurn, Laser Engraver for Wood and Metal, 17'' x 16''

  • ...lity of the machine to cut and 36W is the machine power of the laser machine.
  • Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.08mm ultra-fine compression spot, resulting in detailed and vivid engraving images.
  • All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 Laser engraver more stable with less noise and 3 lifetimes longer than similar products.
  • Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 6mm wood board and a 3mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
  • Wide Compatibility - xTool D1 supports LightBurn and Laserbox Basic (available on mobile devices). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
  • Make Your Creativity a Breeze - xTool D1 5W is the ideal and user-friendly laser engraver for beginners to start off with, like making greeting cards, patterns-engraving, and your personal artwork.
  • Eye Protection Design - The anti-UV filter acrylic on the laser module filters 97% of UV rays to protect your eyes and those around you.
  • Professional Support - We have a professional US technical team and support website to solve all your problems within 24 hours.
Check Stock

SCULPFUN S9 Laser Engraver, Full-Metal CNC Laser Engraving Machine with 5.5W High Precision 0.06mm Ultra-Thin Beam Diode Laser Cutter for Wood, Leather, Acrylic, Large Engraving Area 410x420mm

  • 【90W Effect Ultra-thin Laser Beam】Our new SCULPFUN S9 laser engraver uses the latest 5.5W laser beam shaping technology diode laser, which has an ultra-fine 0.06mm sharp laser focus. With super cutting penetration and accuracy, It can cut up to 15mm thick lightwood, 10mm black acrylic and carve ceramics, stainless steel and dark stone..
  • 【Fast Focusing and High Accurancy】With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of SCULPFUN S9 laser engraver machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
  • 【Security and Protection Designs】The laser filter cover of SCULPFUN S9 laser engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
  • 【Sturdy and Easy to Assemble】The all-metal structure design makes the desktop SCULPFUN S9 laser cutter more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data c....
Check Stock

Comgrow Z1 Laser Engraver 10W Output Power, 24V Desktop 48W Laser Cutter and Engraving Machine with Eye Protection Compressed Laser Spot 0.08mm, 10000mm/min Diode Laser Cutting for Metal Wood

  • 【DUAL Y-AXIS MOTOR】: The Y-axis of acrylic engraving machine is extremely smooth and extremely mobile. Not only provides almost unbelievable speed when engraving but also increases the stability and accuracy of the project..
  • 【Extensive software adaptability & Multiple connection methods】：Z1 laser engraver can be compatible with various mature engraving software, LightBurn for experirenced laser user and LaserGRBL for new laser user. LaserGRBL Support Win 7 / Win 8/ Win 10/Win XP,LightBurn supports window /Mac /Linux system.And you can transfer data via Wi-Fi, USB cable, and SD card and use Z1 laser cutter and engraver machine anytime and anywhere..
  • 【SUPPORT EXPANSION】: This device It can be upgraded with Comgrow rotary roller, perfect for engraving tumblers and cylindrical objects! It has a stable design for multiple diameters. Spacing between the two rotary axes ranges from 8mm(0.31in) to 86mm(3.9in). You can engrave angthing you want..
  • 【quality assurance & Easy to use】The Z1 laser engraver can usually be assembled in 10-20 minutes. The new laser head comes with a focusing plate, allowing you to quickly and easily adjust the focus without any tools. In addition, we provide customers with one-year free parts replacement ....
Check Stock

xTool D1 Laser Engraver with Rotary & Material Box, 10W Higher Accuracy Laser Cutter, 60W Laser Cutting Machine, Laser Cutter and Engraver Machine, Laser Engraver for Wood and Metal, 17'' x 16''

  • ...W is the machine power of the laser machine.
  • Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 10mm wood board and a 5mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
  • All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 laser engraver more stable with less noise and 3 lifetimes longer than similar products.
  • Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.06mm ultra-fine compression spot, achieving detailed and vivid engraving images.
  • Wide Compatibility - xTool D1 supports LightBurn and xTool Creative Space software (Newly upgraded). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
  • Turn Your Imagination Into Creativity - xTool D1 10W is suitable for more professional creators, like carpenters, craftsmen, artists, designers, practitioners of science and technology education and more.
  • All-in-One Kit - Rotary Attachment and Material Box are also provided, with which you can start your creation quickly with the xTool D1 laser engraver and cutting machine.
  • Eye Protection Design - The anti-UV filter acrylic on the laser module filters 97% of UV rays to protect your eyes and those around you.
  • Professional Support - We have a profes....
Check Stock