Top Laser Machine Fitting

ATEZR P20 Plus 120W Laser Engraver with KA Air Assist, 20W Laser Power Laser Cutter, Laser Engraver and Cutter Machine for Wood and Metal, Large Working Area 17”*17”-Grey

  • - ATEZR P20 PLUS Laser Cutter Machine with KA Air Assist, which is a laser cutter and engraving machine with 120W machine power and 20-24W laser power. With an ultra-fine compressed spot down to as small as 0.06 x 0.08mm, Atezr laser cutter and engraver machine is capable of cutting 15mm paulownia wood and 10mm acrylic in one pass, as well as up to 25mm paulownia wood, 40mm acrylic, and 0.05mm steel sheet..
  • & - Achieve high efficiency and accuracy with ATEZR P20 Plus laser engraver and cutter machine, which has a unique industrial design and a sturdy frame made of high-density Aluminum Alloy. With motion stability under high-speed up to 24,800mm/min, Atezr laser engraver for wood and metal saves 40%-80% time compared to 10W machines. The working area of the engraving and cutting machine has been expanded to a large range of 17x17 inches to meet your various creation needs..
  • - - Stay safe and comfortable while using ATEZR P20 Plus laser cutting machine, equipped with a 32-bit motherboard and a red emergency button that allows you to stop the operation at any time. There are also 2 limit switches installed on the X-axis and Y-axis to locate the laser module and....
Check Stock

IWB Woman Pink Gun Holster - Houston - ECO Leather Concealed Carry Soft: Fits Any Small 380 with Laser, Keltec, LCP, Diamond Back, Small 25 & 22 Cal with Laser (Right) (CHPK-71AL-RH)

  • Strong Metal Clip for Maximum Retention | Safe, Easy and Comfortable to Use as Concealment.
  • Double Stitched for Strength and Durability.
  • Fits Pocket Pistols like Small .380 With Small Laser, Small .25 & .22 CAL With SMALL Laser.
  • Keltec .380 With Small Laser, Taurus TCP With Small Laser, SIG P238 with Small Laser, Beretta Pico .380 , Remington RM .380 With Small Laser, Colt Mustang .380 with Small Laser, Kahr P380 With Laser, Diamond Back With Laser, Guardian .380.
  • This Holster is Made for POCKET SIZE PISTOLS, please read fitting Guide before making a purchase..
Check Stock

Electric Micro Engraver Pen USB Rechargable Engraving Machines With 36 Bits,Portable Mini Engraver Tools, Cordless Rotary Tools Engraved Jewelry Glass Stone Wood Plastic Metal DIY

  • ... of ordinary lasers, It can cut 10mm thick wooden boards with high-energy and engrave aluminum oxide, painted metal and ceramic..
  • ▶【Fast Focusing and Sturdy Structure】- With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of the laser cutter machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
  • ▶【Eye Protection Designs】- The laser filter cover of the metal engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
  • ▶【Easy and Fast to Assemble】- The all-metal structure design makes the desktop laser etching machine more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data cable. It is easy to assemble, usually only takes 10-20 minutes to finish installation and setup..
  • ▶【Widely Compatibility】- The S6 Pro laser engraving machine works well with various engraving software, such as LaserGRBL, Li....
Check Stock

CULPFUN S9 Laser Engraver 90W Effect High Precision CNC Laser Cutter and Engraver Machine Deep Cutting for 15mm Wood 0.06mm Ultra-Fine Fixed-Focus Compressed Spot,

  • ☑️【90W Effect Laser Beam Shaping Technology】SCULPFUN S9 laser engraver uses the latest 5.5W laser beam shaping technology diode laser, it has....
  • ☑️【Solid & Easy-assembly Structure Design】The Laser engraving machine full-metal structure design makes the machine extremely solid, and it....
  • ☑️【Safety Protection Design】The laser cutter and engraving machine is equipped with a very convenient power switch, which is not available in....
  • ☑️【Wide Compatibility】SCULPFUN S9 laser cutting machine compatible with various mature engraving software, such as LaserGRBL, LightBurn,....
  • ☑️【Fast Focusing & Quality Assurance】The S9 laser engraving combines a fixed focus lens and a sliding design. You only need to slide the laser....
Check Stock

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
Check Stock

ORTUR Laser Master 2 S2 LU2-2, 24V Laser Engraver Machine, 0.06mm Fixed-Focus Eye Protection Compressed Spot, 32-bit Motherboard, 5000mm/min Laser Engraving Area (390×410mm) for DIY Metal, Wood etc

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit Professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles..
  • ✅Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hun....
Check Stock

SCULPFUN S6 Pro Laser Engraver, 60W Laser Engraving Cutting Machine, 5.5-6W Optical Power Laser Cutter for Metal and Wood, Logo Carving Marking Machine, Gifts for Him (S6 Pro Engraver)

  • ... of ordinary lasers, It can cut 10mm thick wooden boards with high-energy and engrave aluminum oxide, painted metal and ceramic..
  • ▶【Fast Focusing and Sturdy Structure】- With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of the laser cutter machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
  • ▶【Eye Protection Designs】- The laser filter cover of the metal engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
  • ▶【Easy and Fast to Assemble】- The all-metal structure design makes the desktop laser etching machine more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data cable. It is easy to assemble, usually only takes 10-20 minutes to finish installation and setup..
  • ▶【Widely Compatibility】- The S6 Pro laser engraving machine works well with various engraving software, such as LaserGRBL, Li....
Check Stock

Comgrow Laser Engraving Machine for Dog Tag Metal Wood Silicone,Portable Desktop Laser Engraver Machine Tumblers Leather Glass Acrylic

  • 【MULTIPLE ENGRAVING MODES】The laser engraver machine has FOUR MODES that allow you to enjoy the fun of DIY crafting. ENGRAVE QUICK MODE CAN SAVE HALF OF YOUR TIME THAN OTHER MACHINES. The effect is obvious for sketch pictures or pictures with many lines. CARVE MODE is the normal black and white mode for normal engraving, BUT GRAY SCALE IS MUCH MORE DELICATE THAN THE CARVE MODE, mainly for some patterns with a color gradient, the software can control laser light power through the color gradient..
  • 【PERFECT APP AUXILIARY FUNCTIONS THROUGH BLUETOOTH】Do not know how to control our app and machine? we have detail user guide in APP to help you enjoy the laser engraving tool.It has the functions of text editing, photography, photo album, material library, eraser and manual resizing. Engraving mode: bitmap engraving, bitmap grayscale engraving, contour cutting, black and white image, grayscale image, stamp. Operating system: Windows, Android, iOS (computer software can be compatible with Mac OS).
  • 【STRONG COMPACT LASER ENGRAVING CUTTING MACHINE】 1600mw German OSRAM unique laser chip Mini laser Carving Tool for metal cups. The output power of the laser head is stable and can work continuously for more than 10,000 hours. The engraving depth reaches 2mm....
Check Stock

SCULPFUN S9 Laser Engraver, Full-Metal CNC Laser Engraving Machine with 5.5W High Precision 0.06mm Ultra-Thin Beam Diode Laser Cutter for Wood, Leather, Acrylic, Large Engraving Area 410x420mm

  • ...n and accuracy, It can cut up to 15mm thick lightwood, 10mm black acrylic and carve ceramics, stainless steel and dark stone..
  • 【Fast Focusing and High Accurancy】With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of SCULPFUN S9 laser engraver machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
  • 【Security and Protection Designs】The laser filter cover of SCULPFUN S9 laser engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
  • 【Sturdy and Easy to Assemble】The all-metal structure design makes the desktop SCULPFUN S9 laser cutter more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data cable. It is easy to assemble, usually only takes 10-20 minutes to finish installation and setup..
  • 【Widely Compatibility】The S9 laser cutter and engraver machine works well with various engraving software, such as ....
Check Stock

Comgrow Laser Rotary Roller, Laser Engraver Aluminum Y-axis Rotary Roller Engraving Module for Engraving Cylindrical Objects Cans, with 8mm-86mm Adjustment for DIY Laser Marking Different Size

  • 【Wide compatibility】Comgrow rotary laser engraver is applicable to Laser engraving machine and 3D Priter. Work with COMGO Z1, ROBO CNC laser, Comgrow Laser Master, Creality 3D printer Ender 3 and most other brand laser engraver.Note the description in Figure 2.
  • 【Easy Setup and Use】Ready to use laser rotary roller after unpacking, Connect to laser engraving machine simply by replacing Y-axis terminal, no assembling needed, smaller size to better work with most laser engravers..
  • 【Perfectly matched with engraving machine to engrave round objects】The One-piece rubber laser engraver rotary, hardness up to 70A, stronger friction, allowing you to perform 360-degree engravings on round or cylindrical objects such as cups, pen,bottles, pipes, bowls, drums and tubes and over-length plate engraving or cutting..
  • 【Engraving Table Height】 This aluminum rotary laser engraver has a height of 2.36”. Please ensure the space between your machine’s laser head and engraving table can accommodate this added height. Adjustable axes distance up to 3.39” to process a wide range of cylinder diameters..
  • 【One-year Warranty】 Comgrow rotary engraver includes a 12-month warranty to guarantee a reliable product in good working order.We are COMGROW manufacturer....
Check Stock

MathRose A5 Laser Engraver CNC 20W, Laser Engraving Cutting Machine 5000mw, Fixed-Focus Eye Protection DIY Laser Marking for Metal, Wood, Leather, Vinyl, 400x410mm

  • ...light for 97%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles, prevent pets and children from grabbing the laser spot..
  • ✅【Solid and easy installation structure design】The full-metal structure design makes the machine more solid, and improves the accuracy of engraving. The entire engraving machine adopts a modular design, which is convenient for users to assemble,repair, and replace and update machine parts. And the assembly can generally be completed within 10-20 minutes..
  • ✅【Upgraded high-performance fixed-focus laser】Powerful 5W laser Laser output, the fixed-focus laser no need to adjust the focus before engraving.
  • the new laser focal spot is 50% smaller than other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser..
  • ✅【Wide compatibility & Precise scale lines axis】The laser engraving machine can be compatible with LaserGRBL (free, support Windows) or LightBurn (paid, support Windows, Mac OS and Linux). Engraving file format support: NC, DXF, BMP, JPG, PNG, etc.There are precise scale lines on the X-axis and Y-axis....
Check Stock

ZBAITU A40 Laser Engraver, 80W Laser Engraving Cutting Machine, 10W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU A40 laser engraver cutter has 80W machine power and 10W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU A40 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU A40 is equipped with ZBAITU C80 laser module, real 10W laser output power greatly increase engraving and cutting speed.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU A40 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, A40 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU A40 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10,....
Check Stock