Top Laser Truing Stand

Park Tool TM-1 Spoke Tension Meter

  • Measures the absolute tension of each of the spokes in a wheel.
  • The TM-1 works on nearly any bicycle spoke.
  • Used for building or truing wheels, diagnosing wheel problems, or assembling new bikes.
  • Measures relative tension between all the spokes in a wheel.
Check Stock

Motion Pro 08-0538 Axis Wheel Truing-Balance Stand

  • Precision built tool for building, truing, and balancing wheels.
  • Innovative single sided design allows easy access to spokes and nipples.
  • High quality bearings allow precise wheel balancing.
  • 15 mm axle fits most modern street and dirt bikes and many mini bikes.
Check Stock

Faithfull No.7 Jointing Plane

  • Jointing plane for stock removal and truing long edges or levelling wide boards.
  • Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness.
  • Machined seatings eliminate movement and blade judder.
  • A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening.
  • Wooden handles and guidance knobs maximise user comfort.
Check Stock

Hobart 73851&13201 Sharpening Stone Set Fits Slicer 512, 1512, 1612, 1712, 1712A 281009

  • HOBART SHARPENING & TRUING STONE SET FOR SLICERS.
  • Fits SLICERS 512, 1512, 1612, 1712, 1712A.
Check Stock

3x360°Self Leveling Laser Level, ENVENTOR 12 Lines Green Laser Level for Construction/Picture Hanging/Floor/Tile,Three-Plane Leveling and Alignment Cross Line laser level with Laser Tool Kit

  • 【3x360°12 Lines Laser Level】Class II, 003c1mW power output. The laser level tool provides two 360° horizontal planes and one 360° vertical plane, allowing users to cover the entire floor, wall and ceiling of the room. The rugged housing of the laser level has IP54 protection (dustproof, waterproof, shockproof).It can be used in construction sites, homes and buildings..
  • 【Dual Application Mode and Dual Control】Pulse Mode uses ENVENTOR Laser Receiver to extend the laser range to 40m/130ft. Within 3 seconds, the laser level will self-level within ±4.5°, if this range is exceeded, the laser will continue to flash and an alarm will sound. The manual mode can lock the laser line at any angle to meet your different work needs. The laser level supports dual operation of touch buttons and remote control..
  • 【Dual Power Mode and TYPE-C Port】Comes with 2 rechargeable 2600mAh Li-ion batteries, support up to 7 hours of usage time. It also comes with 4 AA alkaline batteries that you can replace anytime you want. We also have 2 Type-C cables, so you can also charge the laser level from a computer, power bank, etc..
  • 【Multiple Mounting Options】1.L-shaped magnetic stand, can be rotated 360 degrees for mounting on metal surfaces. 2. Elevation base f....
Check Stock

Huepar 3 - Point Laser, Self-leveling Green Beam Laser Level with Plumb Spots for Soldering and Points Reference Positioning, 197ft Working Range, Floor Stand and Magnetic Bracket Included- 9300G

  • ⭐【3-Point Laser Level】: Huepar 9300G laser level projects two plumb points and one front point for fast, accurate layout of reference points positioning with the accuracy of 1/9in at 32ft. The laser tool will provide a lot of help in the decoration work, such as Hanging chandeliers and ceiling fans, Installing closets, Installing lighting systems, pipes systems and electrical outlets, etc. Unit points up/down and front to add squaring to plumb, level and align capabilities.
  • ⭐【Bright and Visible Reference Points】: Equipped with OSRAM laser unit provides bright green laser and stable performance. Bright green laser spots provide good visibility in bright working environments, which can help for leveling window and balcony, bricklaying, wall and railing construction, measuring whether the wall is vertical. Can also be widely used in construction, HVAC, electrical engineering, steel bolt frames, etc..
  • ⭐【Efficient Layout & Smart Pendulum】: The 3-point laser level offers precise positioning and transfer of points.With the quick-setting pendulum, the traditional plumb bob is able to stop without redundant waiting. Under self-leveling mode, the laser tool can self-level in 3 seconds and indicates out-of-level condition within 4°. Activate th....
Check Stock

LASGOO Laser Level Self Leveling, Green Cross Laser Line with Vertical and Horizontal for Picture Hanging and Construction, Magnetic Rotating Stand and Portable Case Included, Green

  • [High Visibility] The visibility of the green beam is four times brighter than the red beam. The laser level releases bright, clear green cross laser lines that can be seen up to 100 feet away. Please do not use this product under strong light environment. Safety level: Class II, .
  • [Multi Functions] LASGOO LG-CROSS green laser level is a compact, practical option for basic cross-line leveling work. Suitable for flooring, tiling, ceiling, and molding installation. Help you with picture hanging, construction, DIY decoration, etc.
  • [Self-Leveling & Manual Mode] In self-leveling mode, the fast stabilizing pendulum helps you level the laser line within ±4°. By exceeding 4°, the laser will keep flashing. In manual mode, the self-leveling feature is disabled, and the cross line will be locked, which meets your alignment needs from different angles.
  • [Easy to Use] Easily press the top button or switch the pendulum lock to project the cross laser and get to work. This laser level has a 1/4” screw hole on the bottom.
  • combined with the included magnetic stand which has a 5/8’’ screw hole, it can be used with most tripods.
  • [What You Get] 1x LASGOO Laser Level, 1x Portable Case, 1x Magnetic Rotating Stand, 2x AA Batteries, 1x User Manual. Comb....
Check Stock

3PCS - Bench Grinder Stone Dresser, Grinding Wheel Dressing Tool Stick

  • HIGH QUALITY - Premium silicon carbide material offers an efficient truing and dressing experience of multiple materials, including masonry, stone, brass, titanium and stainless steels. Designed for cleaning, opening and reshaping grinding wheels..
Check Stock

Propet Men's Stability Laser Sneaker, Dark Grey, 08 D US

  • Wave Length: 650nm , mW-(100), Working Voltage: 3.7-5V,.
  • Size: 80*21mm, big heatsink , long dutycycle, can work 5-6 hours constantly!.
  • Item comes with 5V DC adapter and a mount houlder! Line wideness adjustable!.
  • Packing list : Red Laser Module*1. 110-240V AC/DC Adapter*1, Mount Stand*1 , USB-DC Cable*1 (this cable is for connecting 5V USB Power Source, more convenience to use).
  • Attention: This is a Line Laser only, its NOT a CROSS laser, please dont buy this if you need a corss laser! This line laser is for cutting positioning, not a laser that can cut! There is a CROSS LASER available, its another item, not this one!! you can visit our store front to buy the CORSS one..
Check Stock

Mantis Laser Academy - Training Kit - 9mm

  • WORLDs #1 LASER TRAINING SYSTEM: smart targets, automatic scoring, training drills, and training courses..
  • Includes FULL ACCESS code to the award-winning Mantis Laser Academy app.
  • Kit includes: (1) laser training cartridge – 380 ACP, (2) adjustable tripods, (3) 24 heavy duty smart targets, (4) target stand holders, (5) portable carrying case, (6) Mantis Laser Academy access code..
  • Not compatible with Ruger SR series or Hi Point pistols. Using this product with Hi Point pistols will result in damage to the sensor..
Check Stock

Tusk 134-093-0002 Spoke Torque Wrench Kit

  • See fitment guide image for additional Machines this item fits. Easy to use spoke wrench that allows you to torque your spokes accurately and quickly..
  • Removes the guess work out of wheel building, truing and general spoke maintenance..
  • Adjustable from 30 to 150 inch-pounds (Equivalent to: 2.5 foot-pounds to 12.5 foot-pounds.
  • or 3.4 Newton-meters to 16.9 Newton-meters).
  • Includes 5 drop forged heads to fit the most popular spoke nipples..
Check Stock

ATLIN Spoke Wrench Spoke Tool 6 Sizes in One Bicycle Spoke Wrench

  • A necessary tool for building, repairing, or truing wheels.
  • Small and lightweight, measuring 40mm (1.57in) in diameter and 11mm (.43in) height.
  • Fits nipple sizes (metric): 3.23mm, 3.30mm, 3.45mm, 3.96mm, 4.40mm, 5.00mm.
  • Nipple sizes (SAE): .127 inches, .130 inches, .136 inches, .156 inches, .173 inches, .197 inches.
Check Stock