Top Lathes And Accessories

Brad Point Woodworking Drill Bit 3/16 in.Spur Point Drill Hardwood Softwood-10Pcs

  • ✔️【WOOD BRAD POIINT DRILL SIZE】: 3/16" (Diameter) x 2"(Flute Length) x 3-11/32"(Overall Length).
  • ✔️【BRAD POINT TIP】: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use with oak, maple, cherry and other tough woods.
  • ✔️【MATERIAL】: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
  • ✔️【APPLICATION】: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is required.
  • ✔️【USED WITH】: Use in hand drills electric drills drill presses and lathes.
Check Stock

(new quality part) QUALITY MADE DRIVE BELT FOR DELTA MIDI LATHE MODEL 46-250 TYPE 2 / check more information in description

  • Rockwell/Delta 11"/14" Wood Lathe, Spindle Bearings, Set of 2.
  • These are for later model 46-111 lathes. They will not fit early model 14-111 lathes that used non-extended race bearings. It is recommend you measure your bearings prior to ordering.
  • Bearings have a 52mm OD, 25mm ID and are 15mm wide..
  • Replaces Rockwell/Delta Part Numbers: Delta part number: SP-5360 or 920-04-020-5360 or ND7705.
Check Stock

Carbide Boring Bar, Boring Bar Holders Small Bore Inner Hole Turning Tool Tungsten Steel Carbide Boring Bar Φ12mm SHB25‑12

  • ❤Stable: High accuracy, good clamping capability and stable retaining, can insure stable working of boring tool..
  • ❤Design: Practical accessories of lathe inner diameter tools and small diameter CNC special tool..
  • ❤Model SHB25‑12: Model SHB25‑12, means that the outer diameter is 25mm/0.98in, and the clamp boring tool diameter is 12mm/0.47in..
  • ❤Tungsten steel: Manufactured from premium tungsten steel material, has high hardness, not easy to damage and corrosion..
  • ❤Easy to operate: Fine workmanship, compact and lightweight lathes tools, easy to operate..
Check Stock

VEVOR 2.75-Inch Wood Lathe Chuck, 4-Jaw Precision Self-Centering Keyed Lathe Chuck Set, 1-Inch x 8TPI Thread Mini Lathe Chuck, Woodturning Chuck Jaws, Wood Lathe Accessories for Bowls Vases

  • Applicable Workpiece Size: The wood turning chuck is ideal for mini and lathes. Inner jaws tighten around workpieces varying from 0.9" to 1.9". Outer jaws spread inside of workpieces with pilot holes ranging from 1.4" to 2.5". Comes with a set of accessories, including 1 x chuck key, 1 x Screw Chuck Stud, and 1 x wrench to facilitate your work..
  • High-performance Chuck: Each jaw can be adjusted to the center with superior gripping force. Self-centering improves the flexibility. Clamping most shaped workpieces can also be performed..
  • Simple Operation: This complete lathe chuck set includes a precision jaw and a set of installation tools, which bring much convenience to your operation. The chuck has 1" x 8 TPI Thread and 3/4" x 16 TPI Adapter (Mounted on the Chuck).
  • Compact and Stable: Our mini wood lathe chuck is well-designed and made of high-quality steel. Both sides of jaw teeth and chutes are ground to be sturdy. It is coated with antirust oil to prolong the service life..
  • Versatile Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock

Wood Brad Point Drill Bit Set 3/8 In Spur Point Stubby Woodworking Twist Drill Bits-5Pcs

  • ✔️WOOD BRAD POIINT DRILL SIZE: 3/8" (Diameter) x 3-9/16"(Flute Length) x 5-1/4"(Overall Length).
  • ✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use....
  • ✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
  • ✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is....
  • ✔️USED WITH: Use in hand drills electric drills drill presses and lathes.
Check Stock

MAX-CRAFT Wood Brad Point Drill Bit Set 1/8 in Spur Point Woodworking Drill Bits-20Pcs

  • ✔️WOOD BRAD POIINT DRILL SIZE: 1/8" (Diameter) x 1-5/16"(Flute Length) x 2-23/64"(Overall Length).
  • ✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use....
  • ✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
  • ✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is....
  • ✔️USED WITH: Use in hand drills electric drills drill presses and lathes.
Check Stock

Wood Brad Point Drill Bit Set 1/8 in. Spur Point Stubby Woodworking Twist Drill Bits-10Pcs

  • ✔️WOOD BRAD POIINT DRILL SIZE: 1/8" (Diameter) x 1-5/16"(Flute Length) x 2-23/64"(Overall Length).
  • ✔️BRAD POINT TIP: Special brad-point tip bites into to wood, prevents drill bit from skipping or walking without centering punch. Great for use with oak, maple, cherry and other tough woods.
  • ✔️MATERIAL: Made of chrome vanadium steel hardened and tempered for longer useful life, Use in Hand Drills Eletric Drills Drill Press and lathes..
  • ✔️APPLICATION: Designed to work for all wood projects especially suited for furniture making cabinetry and doweling where an exact hole is required.
  • ✔️USED WITH: Use in hand drills electric drills drill presses and lathes.
Check Stock

Mini Vertical Milling Slide Mounted on Z Type Caste Iron Angle Plate -Direct Fit for Mini Lathes

  • Small Vertical Milling Slide for Bench Small Lathes Suitable for Bench Lathes upto 150 mm Swing.
  • Base Dimension :50 x 55 mm * Sliding Table :90 x 50 mm * Vertical Travel 40 mm.
  • Tee- Slot width 9.5 mm Maximum *Jaw Opening : 70 mm * Adjustable Vice Jaws & Brass Gib.
  • Supplied with a Z type Angle Plate. Precision ground from all sides/ faces for perpendicularity/ squareness..
  • One base side of the Caste iron has 2 x Counter drills with suitable stud bolts to clamp the slide and the other has a continuous slot to fasten it through the lathe's toolpost stud. Check all pictures carefully.
Check Stock

Carbide Boring Bar, SHB25-12 Φ12MM Small Hole Inner Hole Turning Tool, Holdingers Φ12MM SHB25‑12, Premium Tungsten Steel Material, Compact and Lightweight

  • High accuracy, good clamping capability and stable retaining, can insure stable working of boring tool..
  • Practical accessories of lathe inner diameter tools and small diameter CNC special tool..
  • Model SHB25‑12, means that the outer diameter is 25mm/0.98in, and the clamp boring tool diameter is 12mm/0.47in..
  • Manufactured from premium tungsten steel material, has high hardness, not easy to damage and corrosion..
  • Fine workmanship, compact and lightweight lathes tools, easy to operate..
Check Stock

Woodcut Tools Bowlsaver Complete System with Two Blades for Coring Bowl Blanks 3 to 12 on Woodturning Lathe BSVR

  • SAFE AND EASY FOR ALL LEVELS - The only coring device which is integrated with both the tool rest tail stock, making it the safest coring device on....
  • SAVE MONEY AND TIME - Create multiple bowl blanks, no additional blade purchases required. The Bowlsaver includes two high strength blades (used one....
  • LATHES 1HP AND UP - Can be used on almost all Woodturning Lathes, from 12" to 16" swing with 1HP and up. 1" tool post included however, each lathe has....
  • PREDICTABLE RESULTS EVERY TIME - The Woodcut Tools Bowlsaver has long lasting Stellite cutters which can cut green or seasoned wood, accurately remove....
  • USER GUIDES, TEMPLATE & VIDEOS SUPPLIED - An extensive user guide booklet is included in the box with your Bowlsaver. User guide, set up and....
Check Stock

WFLNHB Live Center 2MT 60 Degree Lathe Medium Duty Live Tailstock Center for Wood & Metal Lathe CNC Work

  • Specification: #2 Morse Taper (2MT) shank, 60-degree point, 5000 Max RPM, 600 lbs max workpiece weight, runout of 0.0004in/0.01mm T.I.R..
  • Material: The live revolving center is made of precision ground hardened steel, hardened to 61-65HRC, with high rigidity and wears resistance.
  • Triple Bearing Design: The 2MT activity center adopts a combination of a thrust ball bearing and two ball bearings for stable and smooth rotation.
  • Seal Ring: There is a seal ring at the front gland to prevent the entry of cutting fluid and dust.
  • Application: The live center MT2 is specially designed for lathes under medium-speed and medium-load environments. It can be used for high-speed turning and is suitable for CNC lathes.
Check Stock

TM-2 Jewelry Rock Polishing Buffer Machine Bench Lathe Polisher Kit Rock Tumbler Gem Tools Grinder 350W 110V

  • Because of the higher maximum speed (approximately 8500 RPM to 10000RPM) and variable speed control, the Tm Bench Grinder has severa advantages over conventional single or two speed polishing and buffing lathes.
  • You have purchased a fine quality power tool which will perform a wide variety of tasks difficult to do with any other kind of power tool..
  • TM Power Tools are manufactured to high standards of precision and performance and, with proper use and maintenance, will give you years of trouble-free performance.
  • The Jewelry Buffer is designed to burnish and polish jewelry metals, stone, glass .The two tapered spindles attach to the 1/4" motor shafts and accomodate muslin or buffing/polishing/grinding, cutting wheels up to 4" in diameter..
  • Package included:1 x Jewelry Rock Polishing Buffer Machine Kit,Some Polishing Accessories (Show as picture).
Check Stock