Top Lcd Backlight Module

Honeywell Home RTH6360D1002 5-2 Day Programmable Thermostat

• Large LCD digital display with backlight, easy to read in various lighting conditions, C-wire needed for proper installation(Tips, The product include an Electric Control Module and sensors).
• Optional 7 day programming and non-programmable, Enjoy the flexible settings via full 7-Days/4-Periods Setting on device, to reduce energy usage, savings on annual heating and cooling costs..
• EASILY INSTALL YOURSELF: It only takes about 30 minutes, Because our installation guide provides detailed installation steps, compatiblity:3H/2C, 2H/1C Heat pump, Aux Heat, Ventilator, Electric heating, Water heating, Millivolt system, Gas, Compressor..
• Easily install yourself: Pluggable Module design, make DIY more efficiently. Save money: Homeowners save up to 17% annually on heating or cooling costs..
• Vacation set-point override to reduce energy use while away from home, easy programmable mode ensures the desired temperature is reached by the programmed time..

DEVMO LCD 12864 Version Graphic Smart Display Controller Module Board with Adapter and Cable Compatible with RAMPS 1.4 Reprap 3D Printer Kit Mendel Prusa Ar-duino

• A LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment,....
• Small and light appearance, it is easy and convenient to use.
• Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
• LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD....
• This version is an upgraded version of reprap smart controller.

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V(Blue Display Color)

• What will you get: there are 5 pieces OLED display module with blue display color, self-illuminated and no need backlight.
• Power-saving display: the I2c oled display performs better than the traditional LCD display and with lower consumption sicne the IIC (I2C communications) simplifies connections.
• Please note that these I2C OLED display module comes without pin headers.
• More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
• Good compatibility: this i2c oled display module is compatitable with Raspberry Pi 4B/3B+/3B/2B/Zero, compatitable with Arduino, also compatitable for ESP8266, ESP32, STM32, etc..
• Product manual: as shown in the instructions.

HiLetgo 3D Printer Reprap Smart Controller 12864 LCD Display with Smart Controller Board for 3D Printer RAMPS 1.4 Reprap Mendel Prusa for Arduino 128x64 LCD Blue Color

• This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display..
• LCD 12864 graphic smart display module with blue backlight, Small and light appearance, it is easy and convenient to use..
• Using a large screen 12864LCD (3.2'), it can support 8 GB..
• Print your 3D designs without PC, just with a g-code design stored on the SD card..
• Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc..

JM Set of 3 pcs Transparent 3D Floating Frame Display Holder/Box/Frames for Challenge Coins, AA Medallions, Antique, Jewelry,Gift, White, 2.75 x 2.75 x 0.75 Inches

• What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
• Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections.
• Please note that these I2C OLED display module comes without pin headers.
• More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
• Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with ESP8266, ESP32, STM32, etc..
• Product manual: as shown in the instructions.

NEC EA271U-BK 27.4" 4K UHD Business-Class Widescreen Desktop Monitor,BLACK

• ... Cooling System: Thermodynamic cooling fans| Dimensions: Without stand| Width: 42.8 in| Depth: 2.2 in| Height: 24.6 in| Weight: 38.8 lbs| LCD Display Technology: S-PVA| Resolution: 1920 x 1080| Display Format: 1080p (Full HD)| Image Aspect Ratio: 16:9| Motion Enhancement Technology: 60 Hz Refresh Rate| LCD Backlight Technology: LED backlight - edge-lit| Image Contrast Ratio: 4000:1| Brightness: 700 cd/mý| Viewing Angle: 178 degrees| Viewing Angle (Vertical): 178 degrees| Response Time: 8 ms.
• Additional Features: TileMatrix (10 x 10), Open Pluggable Specification slot, Carbon Footprint Meter, AMX Beacon Compatible, 24/7 Scheduler, 10-bit support, DICOM support, PJLink, Raspberry Pi Compute Module Compatible, SpectraView Engine support, Crestron Roomview support| Stand: Optional| Flat Panel Mount Interface: 300 x 300 mm| Supported Memory Cards: microSD| USB Port: Yes| USB Ports Qty: 3| Type: Standard remote| Speaker System: 2 speakers.
• Output Power / Total: 20 Watt| External Speakers Amplifier Power (Total): 30 Watt| Speakers: 2 x main channel speaker - built-in - 10 Watt| Connectivity: LAN, NFC| LAN Protocol: Fast Ethernet| Connector Type: DVI-D input - bot....

HiLetgo 2pcs HD44780 1602 LCD Display Module DC 5V 16x2 Character LCM Blue Blacklight New

• Commonly-used HD44780 controller is built in this 1602 LCD module.
• Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA, SCL.

Yealink T4 series Expansion Module

• The EXP40 Expansion Module for the SIP-T46S, SIP-T46G, SIP-T48S and SIP-T48G..
• Expanding the functional capability of your sip phone to a whole new level..
• Equipped with a 160x320 graphic LCD with Backlight. 20 physical keys each with a dual-color LED and two page views are possible..
• Supports up to 6 Expansion Modules for an attendant console application, adding up to 240 additional buttons..
• Two pages of 20 flexible buttons are shown on the display can be programmed up to 40 various features, the productivity-enhancing features include BLF/BLA, speed dialing, call forward, transfer, park, pickup, etc..

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module I2C OLED Screen Driver DC 3.3V~5V White Display Color

• What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
• Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications)....
• More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
• Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with....
• Product manual: as shown in the instructions.

Original New Laptop for Lenovo 300E Chromebook 2nd Gen AST LCD Module LCD Touchscreen Digitizer Assembly 5D10N24832 5D10Y97713

• 1. [Quality Item] - 100% Original Brand New Notebook LCD Module LCD Touchscreen Digitizer Assembly Replacement Part..
• 2. [Compatibility] - Compatible for Lenovo 300E Chromebook 2nd Gen AST.
• 3. [ Manufacturer Part Number(s) ] - 5D10N24832 5D10Y97713.
• 4. [Warranty] - F-HONG provide a 120-day warranty against any manufacturer defective such as dead-on arrival (DOA), lines, video failure, and backlight outage..
• 5. [Shipping Description] - we will send you fast logistics, it shipping via DHL/FEDEX express, it usually takes 3-5 days to your address..

HiLetgo 2pcs HD44780 IIC I2C1602 LCD Display with IIC I2C TWI SPI Serial Interface Adapter 1602 LCD Display Blue Backlight for Arduino

2 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V - 5V

• What you will get: you will get 2 OLED display modules with classic display colors, self illumination with no need of backlight.
• Power-saving display: the I2C OLED display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications)....
• More details: this I2C LCD display is compatible with Arduino, ESP8266, ESP32, STM32, etc., 3.35V power.
• Operating temperature: -40 - 85 degree....
• Good compatibility: this I2C OLED display module is compatible with Raspberry Pi 4B/ 3B+/ 3B/ 2B/ Zero, compatible with Arduino, also compatible with....
• Product manual: as shown in the instructions.