Top Leather Hole And Eyelet Punch

Adjustable Japanese Screw Punch, Screw Hole Punch, 6 Tip Sizes Leather Paper Craft Adjustable Screw, Leather Hole Punch, Belt Hole Puncher, Wood Handle Hole Punch Bookbinding Tool for Sewing Leather

  • Package Including: Automatic hole punch leather craft tools - come with 5 pcs drills. The diameter of the hole: 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm. leather punch tool is great for leather craft, paper, cutting rubber, plastic, etc..
  • High Quality Leather Hole Punch for Belts: Made of brass with black wooden handle. Wooden handle with a comfortable design for easy punching and less hand fatigue, this wooden punch tool will be easy to use, new design, spin action, easy for operation..
  • Easy to Use: Hold the material securely to keep it from moving and place the screw punch up right where you want the hole and press the punch to handle downward. The bit will turn to make a perfect hole easily. Compared to the general punch, its noise is smaller..
  • Practical Hole Punch Tools: Using a cutting mat, no hammering needed. 5 different drills, enough to satisfy your hole punch needs. Leather belt hole puncher is an excellent choice for making belts and other needs perforated crafts..
  • Widely Application: This item is a hole punch, used in sewing, leather craft, paper craft, printing, cutting rubber, plastic, fiber, felt press and cut, hole punch bookbinding, etc. Note: Avoid disposable multilayer fabric to be perforated together..
Check Stock

15 Pcs Leather Hole Punch,Hole Punch Set for Leather Craft,Round Steel Leather Craft Hollow Hole Punch,Hole Punch Tools for Watch Bands,Leather,Belts,Canvas,Paper (1mm to 11mm)

  • Hole Punch Set: Our Round hollow punch cutter made of hardened carbon steel, leather hollow punch features durable sharpness, can punch holes with standard shapes, which is a good helper for your leather craftsmanship..
  • 15 Sizes Leather Punch Set: These hole punch sizes is (1/1.5/2/2.5/3/3.5/4/4.5/5/6/7/8/9/10/11mm), and various sizes can meet your different needs, whether it is Either a belt or a watch band is suitable..
  • Non-slip Design: The leather hole punch tool have exquisite appearance, sharp prong head and strong hardness, the handle has a non-slip pattern, and it is not easy to slip off the hand, safer during use..
  • Easy to Use: Hollow punch set easy to use, just put a washer on the bottom, or put it on a harder surface, then placing hole punch over area that needs a hole and hit back end with a hammer, that you can get a standard size hole..
  • Widely Used: Leather hole punch for belts are applied for punching holes on leather, watch band, gasket belt, shoe, handbags, clothing, jacket or poster-board, crafts, modeling, home repair etc..
Check Stock

【Upgraded Version】Grommet Tool Kit,Handheld 3/8 inch Eyelet Kit Manual Grommet Press Machine with 500 pcs 10 mm Grommets

  • 【Get extra hole punch】HAPDEN grommet pliers doesn't require pre-drilling before use.If you need to hole punch,metal grommet kit comes a hole puncher and a white backer block..
  • 【Upgrade jaw and die】Keeping the magnetic function of eyelet tool, HAPDEN adjust eyelet pliers opening angle to improve the accuracy of the clamp die. Metal eyelets do the job work better..
  • 【Intelligent&Portable】Upgraded version grommet setter tool is made of special lightweight aluminum alloy and weighs only 0.9 pounds(0.41kg).Add elastic device, automatic return after pressing..
  • 【Upgrade one-piece handle】Grommet fastener tool one-piece molding handle prevents peeling, black handle is skid-proof and dirty-proof, providing you with a better use experience..
  • 【Anti-rust grommet】Silver grommet is made of chrome-plated metal, which has the function of anti-rust and perfect match with the grommet magnetic pliers..
Check Stock

Swpeet 300Pcs 10 Colors 3/16 inch Metal Grommets Kit and 1Pcs Eyelet Hole Punch Pliers with 100Pcs Gold Grommets Metal Eyelets Kits Shoe Eyelets Grommet Sets for Leather Fabric Belt Clothes

  • ★ What You Get ------ In this kit, You will get 300Pcs 10 Different Eyelets color, Each Color 30 sets, Inside diameter: 5 MM (0.2 Inch), outside....
  • ★ Easy to Operate ------- The eyelet kit pliers are ergonomically designed for the human hand, with a spring action for ease of use to produce less....
  • ★ WIith The Hole Punch Eyelet Plier Kit ------- The Hole Punch Eyelet Plier is made of heavy-duty carbon steel, with adjustable inset guide,....
  • ★ 10 Different Eyelets color ----- 10 colors of 5mm eyelets are White, Black, Silver, Dark Blue, Shiny Green, Red, Orange, Purple, Yellow, Blue,....
  • ★ Wide Usage ------- The easy-to-use grommet kit is suitable for shoes, clothing, shoelaces, DIY crafts projects, canvas, tarps, tents, awnings, and....
Check Stock

1/4 Inch Grommet Eyelet Plier Set, Eyelet Hole Punch Pliers Kit with 300 Metal Eyelets, Grommet Tool Kit for Leather Clothes Belt

  • Eyelet size: the inner diameter of the metal eyelets is 1/4 inch, the outer diameter is 1/2 inch, and the length of the barrel is 1/4 inch, you can easily use the eyelets kit to repair by yourself.
  • Please confirm the size before purchasing.
  • Easy to operate: the eyelet puncher are designed to hold well with the hand, have elasticity, easy to use, and can reduce hand pressure, very useful and multi-functional.
  • You need to punch holes with a punching tool before you can use the buttonhole and pliers.
  • Pay attention to the direction of the buttonhole and the pliers, the wrong direction will cause damage to the buttonhole.
  • Package includes: this convenient grommet kit including a one-piece punching tool, 100 pieces gold and 200 pieces silver 1/4 inch metal eyelets grommets, 2 different colors and abundant quantities are enough to meet your needs.
  • Convenient and practical: one-piece punch pliers is made of steel, chrome-plated on the surface, plastic-impregnated PVC handle, 6.6-inch metal pliers with mandrel jaws, can be placed directly after the eyelet is pressed, simple and convenient.
  • Warm note: the bottom of the eyelet is of flowering design, and no washer is needed.
  • After pressing with a hole punch, the bottom will bend naturally.
Check Stock

POUPHY Hole Punch Tool, Eyelet Hole Puncher Kits with 3/16 inch 200 Pcs Gold & Silver Metal Grommets for Leather Fabric Belt Clothes Card Paper Canvas Decorative Repair

  • From amazon family of brands. ROUPHY manufacturers, under amazon’s management, with all our strength provide attractive products in price and quality like amazon basics.
  • Built to Last: Unlike others, ROUPHY hole punch tools are made of heavy duty carbon steel and heat treated technology with over 60HRC hardness, quick and sharp to and would last.
  • Easy to use: Least effort design with spring for easy operation. One-piece metal button holes are self-backing.
  • With 3/16" hole diameter, 5/16" flanges, and 1/8" length under flanges, simple to add or replace holes in seconds.
  • Good for DIY Use: This practical tool can punch eyelets hole in materials like fabric, leather, belts, plastic, acrylic, canvas, suede, paper, card-stock and more to create laced effects on craft projects. Tips: Not applicable to films over 2.0mm, and films below 0.1mm.
  • What you get：Eyelet hole puncher*1, 100Pcs gold metal grommets*1,100Pcs silver metal grommets*1, soft tape measure*1, Grommet inner diameter:0.25 in, outer diameter :0.5 in, drum length: 0.25 in and 12 months warranty.
Check Stock

ABN Hollow Punch Kit Leather Punches Tools Hole Punch Set Gasket Punch Set Gasket Cutter 3/16 to 1-3/8in (5-35mm)

  • ELIMINATE GUESSWORK: Punch accurate washers and gaskets with the ABN | 13 in 1 Hole Punch Kit Hollow Leather Punch Set.
  • This hollow hole punch set is a gasket hole punch set that makes clean and precise holes from 3/16-inch to 1-3/8-inch (5-35mm) in diameter to create round gaskets and washers in leather, copper, plastic, rubber, paper, cork, and any material that is hard to cut with a regular scissor or knife (accepted thickness depends on material.
  • EASY TO USE: Select one of the interchangeable hole punch heads and thread it onto the tip of the hollow punch tool.
  • Hold the comfortable grip tool handle with one hand while using a hammer (not included) on the top bolt to drive the tool into your selected material.
  • The pin point is spring-loaded and retracts into handle when punching a hole.
  • Pin point is removable to cut disks with no middle hole – Unscrew top bolt, remove rubber grip, and release Allen socket screw to remove the center pin.
  • BUILT TO LAST: Hole punches constructed from drop-forged heat-treated steel for maximum strength and longevity while the 4.25-inch x 2.75-inch (10.8cm x 7cm) leather hole punch tool handle is constructed with a rubber sleeve for a comfortable grip with less user fatigue....
Check Stock

4PCS Automatic Center Hole Punch - 5.1 Inch Steel Spring Loaded Center Punch - Heavy Duty Hole Punch for Glass, Metal or Wood - Adjustable Impact Spring Loaded Puncher Tool with Non-Slip Body Surface

  • ...In our package, you will get 4 automatic center punch. The measuring of the metal hole punch tool in length is 5.1-Inch and the diameter of the handle is 0.5 IN. This hole puncher tool is spring loaded with an adjustable stroke that can accommodate various types of materials such as wood, plastic, metal, glass, and leather for all your home improvement projects. Our hole punch steel is portable and easy to carry and store, and with a beautiful look..
  • EASY TO USE: The one-handed spring impact operation without a hammer. Simply adjust to desired spring tension, press firmly against the work piece for an auto center punch. Makes accurate marks to prevent the drill bit from running off..
  • SAFETY TOOL: Our hand punch tool has deep knurling on the surface, non-slip, not easy to rust.
  • damage, or break, and can serve you for a long time. The mini hole punch is designed with a removed rod. Punching, accurate marking, and positioning can be carried out without a hammer. The spring-loaded metal punch tool for accurate holes saves your time and energy..
  • WIDE APPLICATION: Our one hole punch tool is suitable for a variety of tasks like wood, PVC plastic, metal, glass, steel plate, wall positioning and leather. We can use this hole punch heavy duty tool for different p....
Check Stock

Press n Snap Tool Ligne Line 24 Snap Setter Upholstery Sewing Cosplay Costuming Leather Work

  • Durable and reliable heavy duty grommet, snap buttons, rivet, eyelet , pearl button hole punch press machine . This machine is an all in one tool..
  • Interchangeable dies, hole punches and supplies ( Grommets, studs, rivets, snaps, jeans button, eyelets, pearl rivets etc) are sold separately..
  • You can punch holes with the interchangeable hole punches on products such as clothes, bags, shoes, belts..
  • This machine uses 6.35 mm (1/4" ) thread size dies. Please make sure that this matches your dies/hole punches thread size. Any doubt? Please contact....
  • There are 3 available colors . A random color of Red, Navy or Blue will be shipped.
Check Stock

PH PandaHall Hand Press Grommet Machine Grommets Eyelet Tool Kit for Bag Belt Wallet Jeans Grommets Snap Buttons Rivets Eyelets Pearls

  • Hand Press Grommet Machine: Can be used as a punch machine, eyelet machine, and rivet machine. Convenient to use and enough to meet your various....
  • Premium Material: Aluminum material, it is equipped with a handle cover to make the operation more comfortable and protect your hands, durable and....
  • Easy to Use: Mounted to a tabletop or just stand alone. Gets grommets to be set further into the material, not just along the edge. Press the lever,....
  • Dies and Hole Punch Tool: The grommet machine great for dressmakers, arts and crafts, sign shops, and manufacturers. Perfect for banners, signs,....
  • Wide Usage: It can help you to punch the grommets for banners, signs, belts, bags, shoes, and etc. The grommets eyelet tool can be applied to set....
Check Stock

TICONN Leather Hole Punch Tool Set, Heavy Duty Multi-Size Hole Puncher Tool for Belts, Watch Bands, Plastic, Fabric

  • [PREMIUM QUALITY] TICONN heavy duty leather hole punching tool is made of premium steel which punches clean with fewer burrs and stays sharper for a longer time. The slip-proof ergonomic handle will save you effort working with this leather punch tool..
  • [EASY TO USE] Leather hole punch set is easy to use. Simply unlock the handle, then rotate to select desired hole punch size on the dial until you feel the click. Lastly, just give it a form squeeze to punch at your desired spot..
  • [TOOL KIT COMBO] Our standard hole puncher kit comes with a 6-hole punching plier, a stainless steel ruler, a small file, a screwdriver and 3 spare brass pads..
  • [WIDE APPLICATIONS] Our hole punch can be used on many more materials beyond using as leather tools. It can be used on fabric such as canvas or denim, plastic sheets, rubber, and cardboard. Also a ideal belt hole puncher for leather. You may even use it to punch holes on credit card chips to scrap them.
  • [TICONN BRAND QUALITY COMMITMENT] We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please c....
Check Stock

Handmade Manual Press Machine Stud Rivet Setter Punch Puncher Tools Dies 6-20mm 8mm diameter

  • This Kit includes a Hobby Trendy Hand Press, one 9 mm Single Cap Rivet Dies, 9mm single cap and 9 mm double cap rivet dies.
  • 2 mm hole punches are recommended for 9 mm rivets: 2.5 mm hole punch is recommended for 12.5 and 15 mm snap button dies: 3 mm hole punch will be....
  • Open Ring snap Button dies are for 9.5mm open ring prong snap buttons and no hole punches are needed..
  • All of the dies included in this set works perfect with Hobby Trendy Hand Press that is included in this set. Currently , there are 5 available colors....
Check Stock