Top Led Display Thermocouple

MYPIN® Universal Digital TA6-SNR PID Temperature Controller with Relay DIN 1/8 SSR-25DA and K type thermocouple,Dual Display for F/C,7 Output Combinations,Accuracy 0.2%

  • √ ● Dual display for Fahrenheit(F) and Celsius(C)，Range: -1999 to 9999 (depends on the input signal).
  • √ ● Input: Thermo Resistor: PT100, Cu50，Thermocouple: K,Wre3 ~ Wre25 ， Main Output: SSR: Open circuit: 4V, Closed Circuit: 24V 40mA DC.
  • √ ● K type thermocouple Temperature rang:0-800℃, Sensor Dia: 4.5mm, Cable Length: 2m.
  • √ ● Solid state relay SSR-25DA Load Voltage: AC 24-380V, Load Current: 25A, Input Voltage: DC 3-32V.
  • √ ● Packing details: 1 x SNR Temperature Controller( DIN 1/8), 1 x SSR-25DA Solid State Relay, 1 x K Type Thermocouple( 6 Feet).
Check Stock

PIE 525B Automated T/C & RTD Calibrator 12 RTD & 14 T/C types

  • Automated RTD and Thermocouple Calibrator. Comes with rubber boot, hands free carrying case, test leads and NIST cert..
  • Easy to use With the PIE 525B you can check and calibrate all your thermocouple and RTD instruments and measure temperature sensors..
  • Take it into the shop, plant or field Carry it without worry - it comes protected with a rubber boot and rugged, low profile switches. Easy to operate even in the dark areas of the plant with the backlit display..
  • Calibrate thermocouple instruments to 0.1 & 0.01 degrees-F & degrees-C The PIE 525B works with the thermocouples you use including types J, K, T, E, R, S, B, N, G, C, D, L (J-DIN), U (T-DIN) and P (Platinel II). Or calibrate from -13.0000 to +80.0000 mV..
  • Calibrate RTD instruments to 0.1 & 0.01 degrees-F & degrees-C Stop carrying around a decade box and RTD resistance tables. The 525B works with the RTDs you use including Platinum 10, 50, 100, 200, 500 & 1000 Ohm (alpha = 3850), Platinum 100 Ohm (alpha = 3902, 3916, 3926), Copper 10 & 50 Ohm, and Nickel 120 Ohm. Or calibrate from 0.000 to 400.000 and 0.00 to 4000.00 Ohms..
Check Stock

2 Pcs Digital 2 Channels K Type Thermometer with 8 Thermocouples (Wire and Stainless Steel) -50~1300°c (-58~2372°f) Dual Measurement Meter Sensor Handheld HVAC Thermometer High Temperature Pyrometer

  • High Accuracy: reading accuracy (±0.1°C ±0.4), fast response using K type thermocouple probe, this digital temperature gauge will bring you a lot of convenience.
  • You will get 2 pcs of K type thermometers, 4 pcs of wire thermocouples and stainless steel thermocouples.
  • Multiple Temperature Display: in addition to the max/ min/ average, data hold, and auto power off functions, this hand held temperature reader is specially designed with a "T1-T2" calculation function, making it easy for the user to find the difference between two samples.
  • ​Portable and Practical: powered by battery, this thermometer with probe is portable and practical, operate it with 6 simple buttons with clear instructions, suitable for beginners and skilled users.
  • Plus, the removable silicone rubber cover protects your device from accidental drops.
  • It is factory calibrated and factory reset, and any standard K type thermocouple connector can be applied to replace the included thermocouple when needed.
  • Wide Measurement Temperature Range: mainframe range of digital k type thermometer is about -50°C ~ 1300°C (-58°F ~ 2372°F).
Check Stock

WALNUTA GM1312 Digital Thermometer Dual-Channel Temperature Diagnostic Tool Tester for K/J/T/E/R/S/N Thermocouple with LCD Backlight

  • The electrical compensation function provide the compensation to the thermocouple error so as to improve the overall precision..
  • To measure the thermocouple of J, K, T, E, N, S and R type..
  • Double display with backlight shows T1/T2 and combination of T1 and T2..
Check Stock

CDN INTP662 Infrared Gun / Thermocouple Thermometer for Food. 1.5' Height, 2.15' width, 6.25' Length, White

  • Measurement range: infrared: -76 to +662°f/-60 to +350°c.
  • thermocouple: -76 to +662°f/-60 to +350°c, distance spot: 8:1, display size: 0.875 w x 1.125 h (in)/2.2 w x 2,85 h (cm).
  • Nsf certified, 1.5 mm thin tip, dual function with infrared for non-contact surface temperatures and thermocouple probe for internal temperatures.3.75 inch (9.53 cm) probe.
  • Data-hold, one-button operation, battery status indication, maximum, minimum and lock modes for continuous scanning.
  • 304 stainless steel probe, auto-off after 15 seconds, 8-beam laser target illumination, backlit haccp check lights, food-safe abs plastic with biocote.
Check Stock

Taylor Precision Products Thermometer 3Pc Set Includes 1 Super Fast Digital Thermometer and 2 Leave-in Oven-Safe Analog Meat Thermometers, Multicolor (5274076)

  • KITCHEN ESSENTIALS: This set includes one Taylor Turbo Read Thermocouple Thermometer with folding probe, 1 large dial leave-in thermometer, and 1 standard dial leave-in thermometer..
  • SUPER FAST: The digital thermometer in this set uses thermocouple technology for rapid temperature readings in 6 seconds. This highly accurate thermometer has a range of -40F to 572F..
  • BLUE BACKLIT DISPLAY: Large 1” display is backlit for easy reading on the digital thermometer included in this set. HOLD function locks in the last temperature displayed on the screen after it is removed from the food..
  • OVEN SAFE: These meat thermometers use a tempered glass lens and are safe to leave in an oven for monitoring during cooking. The large dial is perfect for poultry and roasts, while the standard dial is ideal for smaller items and cuts of meat..
  • IMPORTANT: The thermometer will be hot after use. Use potholders or oven mitts when handling a hot thermometer.
Check Stock

Upgraded Digital Box LED Controller of Heat Press Machine for 12 x 15 Inch K-Type Digital Heat Press Machine, Single Hole Heat Press Machine Temperature Control Box for T-Shirts/Mug/Plate/Cap

  • ...e timing should be set between 0~999 sec..
  • ✅【Widely Application】This adaptive temperature controller can be used for heat press machine whose size is within 12” x 15”, working power is below 1200W, and its original digital box is dual LED display. This control box is only available for machines with K-type thermocouple, not all models. Please confirm whether it is suitable for your machine before purchasing, heat press machine is not included..
Check Stock

Traceable Water-Resistant Thermocouple Thermometer with Calibration

  • Display Type: 0.625" Display, 3.75-digit LCD.
Check Stock

Thermco ACC310DLSDIG Laboratory Long Stem Digital Thermometer, 12\ Stem Length, -50 to 300°C Range, +/-1.0°C Accuracy

  • High Temperature K-type Thermocouple Thermometer Set with Stainless Steel Probe.
  • K-type thermocouple wire with Standard Accuracy: +/- 2.2 °C or +/- .75%.
  • 5 ft (155 cm) long thermocouple cable with braided stainless steel cover, mini thermocouple plug made from chromel / alumel.
  • Temperature measurement range: -328 to 932 °F (-200 to 500 °C), short term 1472 °F (800 °C).
  • Grounded K-type Thermocouple junction for fast measurements, 1x 9V battery included.
Check Stock

3\ Outside Air Kit for Pellet Stoves with 3\ Air Intake Pipe Including Harman Stoves 3\ X 10'

  • QuadraFire Thermocouple 800, 1000, 1100i, 1200, 1200i Pellet Stoves 812-0210.
  • Top Quality Aftermarket Replacement Part.
  • The Thermocouple is the device that monitors the fire after start-up. Once it reaches temp the thermocouple allows the stove to start feeding on it's own in normal operation mode. If your stove goes out after the initial start-up cycle, more than likely the thermocouple needs to be replaced..
  • Designed Specifically for the above mentioned models.
Check Stock

Montague OVEN THERMOCOUPLE 48\ 1036-7

  • K-type thermocouple connector with real chromel alumel contacts.
  • Miniature or mini k-type connector dimensions.
  • Works with all k-type thermocouple wires and extension wires.
  • Set of 10 male mini thermocouple connector plugs.
  • Compatible with thermocouple plugs from other manufacturers.
Check Stock

ThermoPro TP18 Ultra Fast Thermocouple Digital Instant Read Meat Thermometer for Grilling BBQ Smoker Kitchen Food Cooking Thermometer for Oil Deep Fry Candy Thermometer

  • Ultra-fast and accurate: Kitchen thermometer features advanced thermocouple technology that provides 2-3 seconds response time.
  • 4 inches food grade probe thermometer guarantees an accurate temp reading to ±0.9°F with a wide temp range of 14°F - 572°F.
  • Lock Function: Digital meat thermometer for grilling can lock the current temp when the probe is removed from food and keep the temp displayed, no more dangerously peering into the oven or grill.
  • Large backlit display: Cooking thermometer features backlight LED display with large luminous digits to let you see clearly while cooking in the evening indoors or outdoors.
  • 90 seconds auto-off to save battery life.
  • Convenient storage: Digital thermometer for cooking with foldaway probe, features a magnetic back to allow you to easily attach to refrigerator or any metal surface.
  • a hanging hole for your kitchen hooks or a lanyard.
  • Calibration: Calibration function adjusts your instant read thermometer probe sensor back to the correct accuracy, making this instant thermometer which lasts a lifetime.
Check Stock