Top Led Ir Visible Photodiode

Montana SEAL Undercover Daddy (Brotherhood Protectors Book 9)

  • USE - The LS221 is a Class IIIa laser device for civil use that features a visible laser pointer for daylight or low light operations, and and IR laser pointer for use with night visin devices.
  • DUAL LASER & IR – The dual laser sight that features one visible green laser and one IR laser to be used with Night Vision devices, the lasers are coaxial so that the user could adjust them synchronously using same windage and elevation adjustments.
  • DIRECT GREEN LASER - The green laser of the combo is a direct green laser that is more energy-saving, brighter and more stable than DPSS laser.
  • FEATURES – Quick release picatinny rail mount, waterproofed remote cable switch, and aluminum housing with Microarc oxidation finish.
  • LASER DATA – Laser output – 0.5mw, IR pointer output - 0.1mw(low)/0.7mw(high), visible laser class – IIIA.
Check Stock

ACTIONUNIOn Airsoft PEQ-15 Pro UHP Visible Green Laser + Visible Red Laser + White LED Flashlight (Tan)

  • PEQ-15 Pro special version for airsoft fans who are without NVG, this item is a visible UHP green laser+red laser+ white LED flashlight combo.
  • Use a brighter UHP green laser instead of the IR laser that needs to work under NVG. The upgraded appearance of the aluminum extended electric box and the upgraded UHP silicon power button for the engraving version make the PEQ-15 Pro looks more tactical and exquisite.
  • The UHP visible green laser is super bright, can even be used outdoors at noon. The visible red laser is designed for indoor activities to prevent halos on the target.
  • PEQ lasers are both adjustable to hold zero, laser output power less than 5mW, Class IIIA.
  • LED flashlight brightness up to 270 lumens.
  • Made of high-strength nylon plastic material, fits standard 20 mm Picatinny rails.
  • Comes with a pressure switch, runs with 2pcs cr123a batteries or 2pcs 16340 batteries (NOT INCLUDE BATTERY).
Check Stock

HOLOSUN - Dual Green Laser Sight with IR Illuminator (LS321G)

  • USE – The LS221 is a Class IIIa laser device for civil use that features a visible laser pointer for daylight or low light operations, and and IR laser pointer for use with night visin devices.
  • DUAL LASER & IR – The dual laser sight that features one visible green laser and one IR laser to be used with Night Vision devices, the lasers are coaxial so that the user could adjust them synchronously using same windage and elevation adjustments.
  • DIRECT GREEN LASER – The green laser of the combo is a direct green laser that is more energy-saving, brighter and more stable than DPSS laser.
  • FEATURES – Quick release picatinny rail mount, waterproofed remote cable switch, and aluminum housing with Microarc oxidation finish.
  • LASER DATA – Laser output – 0.5mw, IR pointer output – 0.1mw(low)/0.7mw(high), visible laser class – IIIA.
Check Stock

ELP 100fps USB Camera Night Vision FHD 1080P Infrared Webcam,Wide Angle 3.6mm Lens Auto IR Web Cam,2mp USB2.0 Day Night Security Camera with Mini Housing,High Speed 60fps 100fps USB Camera for Most OS

  • Model:ELP-USBFHD05MT-KL36IR,Day/Night Vision: IR-CUT Filter switched in and out automatically based on light condition (only visible light during the daylight and infrared sensitivity during the night with 850 IR LEDs on).With IR Cut and IR LED for day&night whole day view:ELP usb camera module with 24pcs IR leds,Auto IR usb camera module with photosensitive resistor on the camera board,when the surrounding environment becomes dark,the ir LED will turn on antomatically,On the contrary,it will be closed automatically,too..
  • FHD Resolution: This camera adopts 2MP OV2710 sensor for sharp image,Max. resolution: 1920*1080,support:1280 (H) x 720 (V),640 (H) x 480 (V) USB2.0 Por for fast,smoother, embedded USB camera module convenient compatible for all kinds of device..
  • With 10PCS IR LED for whole day and night image view,Camera support night vision with UVC for all kinds of system,Plug&Play,UVC-compliant, just connect the camera to PC, laptop, Android device or Raspberry Pi with the USB cable without extra drivers to be installed..
  • YUY2 and MJPEG compression format optional:ELP 2megapixel night vision usb camera module with MJPEG/YUY2 compression format optional help to save more storage space,streaming with less demand on your computer provides faster and sm....
Check Stock

940nm IR Illuminator LED Flashlight Infrared Light for Night Vision Scope Adjustable Focus Zoomable,Waterproof Flashlights with Scope Mount Remote Pressure Switch Battery for Night Hunting

  • 【Durable】Well Built Body made of Aircraft Aluminum Alloy.Water Resistant, with "O" Ring sealed on both ends,it can be used in rainy days, but....
  • 【Complete Hunting Set】Intelligent remote pressure switch can free your hands when you are holding your shotgun. Press and hold the button to turn....
  • 【Single Mode One Mode IR Light Flashlight】 1 switch mode(On/OFF), press the tail button of the IR led flashlight to switch the flashlight On and....
  • 【Zoomable,Ajustable Focus】 Lens rotary focusing function enable the ability to focus in for a tight spotlight or back out for a flood effect,....
  • 【Hunting Special 】Infrared light at 940nm is not visible, and infrared light is not visible to the human eye. Designed for night vision equipment.....
Check Stock

Triplett LT80 LED Illuminance/Light Meter up to 400,000 Lux / 40,000 Fc

  • Measures light intensity from white LED light sources up to 40k Foot candles (400k Lux) as well as from fluorescent, metal halide, high‐pressure sodium, and incandescent sources.
  • Min/Max/Avg function recalls highest, lowest and average reading.
  • 9,999 count LCD display with Data Hold that freezes readings on the display.
Check Stock

Foto4easy 43mm Infared Filter,Adjustable 530nm to 750nm Infrared X-Ray IR Filter for DSLR Camera Lens

  • Infrared Filters:sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating..
  • Six-IN-One DESIGN: 43mm Six-IN-One adjustable infrared filter, you don't have to carry a bunch of filters for shooting. Just one filter, free to use in 530nm to 750nm light..
  • This adjustable IR filter is a compact all-in-one variable wavelengths filter that adjusts the amount of wavelengths with just the twist of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at whichever wavelengths you are using..
  • There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths..
  • Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, ar....
Check Stock

Chanzon 5mm IR Infrared LED Diode Emitter + Receiver 940nm Sender Reciver Kit + VS1838B 1838 Sensor Ray Night Vision 940 nm 20pcs Lighting Lamp Bulbs Assortment for Arduino Raspberry

  • Overview: 10pcs 940nm Sender with Emitting Angle 45 Degrees, 5pcs 940nm Receiver with Receive Angle 30 Degrees, 5pcs HX1838 VS1838B TL1838 Receiver with Receive Angle 70 Degrees.
  • Emitter Voltage: 1.2-1.5V,Receiver VS1838B Voltage:3V-5V, Through Hole DIP 2pins 5mmled LEDs Set Transmitter Lights.
  • Shipping Weight: 0.65oz / 0.018kg Pack of 20 20pcs Leddiode Infra Red Photodiode.
  • Compatible with: Electronic devices, Phototransistor, Communication equipment, IR beam sensors, detector, Infrared Remote, DIY PCB Circuit, Throwies,Arduino, Raspberry Pi, Hobby, Science Experiments,Breadboard,Camera,Remote.
  • vs 1838b High Sensitive,Low forward voltage Assorted.
Check Stock

LThyzszb Tactical IR Strobe Helmet Light Military Signal Light with IR & Visible LED IFF Helmet Strobe, for Outdoor Fast Rescue Adventure Light (Brown Base-Green Light)

  • The Star 6 Helmet Light is With the Latest Specific Uses for the Helmet Mounting, Widely Used in Military and Outdoor Adventure .MFG and Various Types of Ground Operations..
  • Functions Include: Visible LED + IR + White Light Strobe, Can Provlde Strobe or Constant Light. Color: Green Light+IR / Red Light+IR/Blue Light +IR. ( Attention: IR Lights are Invisible and Shallow Lights, Need to use Night Vision Device to Fully Display.).
  • High-quality ABS Material, IP67 Waterproof Grade. Low Temperature Resistance, When You Need Rescue in an Outdoor Adventure, Your Military Helmet Lights Can Better Assist You in Requesting Support, and it Can Also be Used for IFF..
  • Installation of Battery: Open the Battery Cover, Insert 1pcs CR123A( 3.0V ) or 1 * 16340 ( 3.7V ) (Not include). Put on the Battery Cover and Tighten the Fixing Screws Clockwise..
  • We Emphasize After-sales Service. Any Issue, Just Contact us Through Your Buyer Center to Enjoy an Efficient Solution..
Check Stock

Fotga 58mm Six-in-One Adjustable Variable Infrared IR Pass X-Ray Lens Filter 530nm to 650nm 680nm 720nm 750nm

  • Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating.
  • There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths.
  • Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device.
  • The creative adjustable IR filter is a compact all-in-one variable wavelengths filter that adjusts the amount of wavelengths with just the twist of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at wh....
Check Stock

FocusFoto FOTGA 67mm All-in-One Adjustable Infrared IR Pass X-Ray Lens IR Filter, Variable from 530nm to 650nm 680nm 720nm 750nm Optical Glass

  • Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating..
  • There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths..
  • Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device..
  • The creative adjustable IR filter is a compact all-in-one variable wavelengths filter that adjusts the amount of wavelengths with just the twist of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at....
Check Stock

Fotga 27mm Infrared Infra-red IR Pass X-Ray 720nm Lens Filter for Sony Nikon Canon Pentax Olympus Leica Samsung Fujifilm DSLR Camera

  • Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light.
  • They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating.There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light.
  • These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths.
  • This IR filter can block all visible light under 650nm, therefore let you experience some different shooting.
  • 720nm is suitable for ordinary DC/DV/DSLR cameras.
Check Stock