Top Led Lamp 5mm 10mm
Partsam 10X 3.8 Amber 12V Front Side Marker 6 LED Trailer Truck Lorry Indicators Lights, Amber Rear Led Marker Trailer Parking Turn Signal Lights for Truck Bus Boat Rv Lorries SUV UTV
- ...ape bases are used to adhere to the back of the amber marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
- These small thin clearance lights need to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp).
- Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx..
- The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer.
- Partsam Amber Led Lights function as marker lights, clearance lights, runnling lights, side marker lights, front parking lights, indicator lights, identification lights, boat interior lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps and so on.
- We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright.
- The side marker indicator light is hardwired with 2 wires and can be used as constant on trailer lights: black is negative and the yellow wire is positive.
- These lights don't come with the on/o....
Check StockQue-T 10mm 2 LEDs Angel Eyes & Demon Eyes LED Headlight /Back Light for 1:10 RC Model Crawler Cars(Full White, 10mm)
- With switch, the middle lamp can be controllable, aperture was always Lights..
- Outer diameter:10mm /Middle Light Diameter: 5mm /Cord length: about 50cm..
- Bright LED light output,halo style bulb,bright colors,4.2v-6v input,2 lighting options,pre-wired..
- Universal model, easy to install,it works great with the RC Light Controller..
Check StockPartsam Thin Line 3.8" 6 LED Blue Side Led Trailer Marker Lights Sealed Clearance Light Indicators for Trucks Bus Trailer RV Camper Lorry Van UTV Marine Boat Stern Light Decoration Lights(10Pack)
- ... tape bases are used to adhere to the back of the blue marker lights or to the surface to which the blue light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
- These small thin clearance lights need to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp).
- Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx..
- The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer.
- Partsam blue led lights function as marker lights, clearance lights, runnling lights, side marker lights, license plate lights, indicator lights, identification lights, boat interior lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light,cockpit light, step lights, deck lights, trailer lights, led courtesy lights, stern light, stair lights, truck lamps and so on.
- Truly many customers use them as boat marine lights, very bright.
- The blue led strip light bar is hardwired with 2 wires and can be used as constant on trailer boat lights: black is negative and the red wire is positive.
Check StockEasycargo 100pcs Heatsink Assortment Kit Small Cooler Aluminum Heatsink Set for Cooling PC Laptop PS5 M.2 CPU GPU VGA RAM VRAM VRM IC LED MOSFET Transistor Voltage Regulator (Preapplied Thermal Tape)
- Update Version: 100pcs (18+82) small to medium sizes of heat sink. Pre-applied 3M 8810 thermal conductive adhesive tape..
- Small anodized Aluminium: 20pcs 9x9x5mm, 8pcs 10x10x10mm, 8pcs 11x11x5mm (L*W*H).
- Medium anodized Aluminium: 8pcs 14x14x7mm, 8pcs 19x19x5mm, 8pcs 20x20x6mm, 2pcs 22x22x10mm (L*W*H).
- Silver Tone Aluminium: 20pcs 7x7x6mm, 10pcs 8.5x8.5x8mm, 8pcs 15x15x6.5mm (L*W*H).
- Can be used for cooling of variety of electronics components such as Development Boards VRAM VRM CPU GPU VGA RAM IC Chips LED Laptop MOSFET Transistor SCR Southbridge Northbridge Voltage Regulators PS5 M.2 M2 SSD NVMe 2280 2242 22110 modules..
Check StockBonlux 10W R7S LED Bulb 118mm, J Type 118mm LED Light Bulb T3 Double Ended R7S J118 LED Floodlight Replacement Bulb Daylight 6000K for Floor Lamp, Security Light (2-Pack)
- Technical Features -- 10W 118mm LED R7S Light Bulb - 12mm/0.47" Diameter, 118mm/4.65" Length - Voltage: AC 120V - Beam Angle: 360°, Non-Dimmable..
- Super Slim -- Standard R7S 118mm base, the diameter is only 12mm/0.47", Bonlux 10W 118mm R7S LED lamp can replace standard floodlight halogen double ended tubes pefectly..
- Excellent Heat Dissipation -- R7S LED J118 flood light has high quality ceramic body and PC cover, excellent thermal conductivity, good heat dissipation, low power consumption, superior energy efficiency, reduce expense at electricity bill and frequent bulb changes..
- Widely Applications -- 118mm R7S LED light for use in Floodlight Replacement Bulb, Work and Security Lights, Workshop Lighting, Stage and Studio Lamp, LED Ceramic Metal Halide Lamp, Floor Lamps, Speciality Lights, General Lighting..
- Energy Saving -- 10W Double-ended J118 R7S LED Light repalcement for 75W halogen bulbs, save about 90% on your electricity bill..
Check StockPartsam 20Pcs 3.8" 6 LED Clearance Truck Trailer RV Side Marker Indicators Purple 12V, Purple Trailer Marker Lights, Rear Side Marker Lamp, Led Marker Lights for Trucks, Cab Marker, RV Marker light
- ...uded. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
- These small clearance lights needs to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp).
- Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx..
- The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer.
- Partsam Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights,safety light,warning light,underglow light,indicator light and so on.
- The indicator light is hardwired with 2 wires and can be used as constant on trailer lights: black is negative and the other is positive.
- These lights don't come with the on/off switch and Wire leads come out the back in the center so you must drill a hole in the mounting surface for them.
Check Stock5mm Piranha Red LED - Ultra Bright Superflux (Pack of 100)
- 5mm Piranha Red LED - Ultra Bright Superflux (Ships from US).
- Size: 5mm Piranha / Superflux LED, Color: Red, Luminosity: 10,000-13,000 mcd.
- Forward Voltage: 1.9-2.1v, Current: 20mA, Wavelength: 620-630nm.
- Viewing Angle: 100-120 Degrees, MountStyle: Through Hole (DIP), Lens Color: Clear.
- Super bright LEDs, used for mods, RC, adruino, cars, HO Scale models, planes, trucks, adafruit projects, halloween, christmas, PC, Ultra Light, etc....
Check StockPartsam 10Pcs 3.8\ Inch Smoked 6 White LED Boat Interior Navigation Courtesy Utility Strip Light Bar Marine Deck Transom Step Cockpit Lighting Lamp Waterproof for Fishing Pontoon Kayak Yacht Sailboat
- ... included. The foam tape bases are used to adhere to the back of the boat lights or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
- These white marine lights needs to be hooked up to a 12v power source. Flux: 120Lumens (about 20 Lumens per lamp).
- Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx..
- Partsam Boat Marine Lights function as led courtesy Lights, camper outside step light, kayak cockpit lights, deck Lights, accent lighting, fishing pontoon boat interior lights, kayak night fishing, led stern light, Decorate Light, Night light, stairs lights,Boat Center Console Light, under dash lights, walk way lights, Transom Light, Golf Cart Light, Boat Interior Lights,trailer marker lights, trailer clearance lights, white led marker lights and so on.
- This white led strip is hardwired with 2 wires and can be used as constant on boat lights: White is negative and Black is positive.
- These lights don't come with the on/off switch and Wire leads come out the back in the center so you must drill a hole in the mounting surface for them.
Check StockPartsam 20Pcs 3.8" 6 LED Amber Side Marker Lights, Amber Trailer Marker Lights, Front Rear Side Marker Lamp Amber, Led Marker Lights for Trucks, Cab Marker, RV Marker light Yellow (Pack of 20)
- ...oam tape bases are used to adhere to the back of the marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
- These small thin clearance lights needs to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp).
- Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx..
- The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer.
- Partsam Amber Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on.
- We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright.
- The indicator light is hardwired with 2 wires and can be used as constant on trailer lights: black is negative and the yellow wire is positive.
- These lights don't come with the on/off switch and Wire leads come out the back in the center so you must drill ....
Check Stock500 Pcs 5mm LED Light Emitting Diode Assortment Kit,Low Voltage Diffused Diode for DIY PCB Circuit,Indicator Lights
- 1.Bright led light:High Quality led chips,ensure to keep each lamp bright enough.
- 2.High Quality:Environmentally friendly oxygen resin is used in the whole structure,which can withstand high temperature.
- 3.Application:Always use on indicator lights,DIY Led Project,PCB Circuit,also can be use on Arduino items,perfect use for home,office and industry electrical equipment and electrical appliances.
- 4.Item Dimension:Head Diameter is 5mm,Pin Length is 18mm.
- Voltage:Red/Yellow:1.8V-2.3V;Blue/Green/White:2.8-3.6V;Electric current:20mA.
- 5.What you get:5 color led diode,100pcs in each color,total 500pcs,any quality problem about the product,please contact with us for after sale service.
Check StockPartsam 20PCS 3.8" Blue 6 Led Side Marker Clearance light Truck Trailer Marine Boat Lights Strip, Transom Cockpit Night Fishing Lighting , Thin Line iddicator Lights for Truck Lorry Van RV Camper
- Partsam (20 x Blue) Clearance/Side Marker Car Truck Trailer Lights.
- Each lamp contains 6pcs high power leds, gives you bright lighting output..
- Functions as clearance, side marker, identification light, indicators etc. Tapes and screws eusures complete installation..
- Fits for Truck, RV Trailer, Lorry, Pickup, etc.
- Universal LED Light side marker light, clearance lamps and indication lamps etc..
- Light Size: 75mm x 20mm x 5mm (2.95'' x 0.8'' x 0.2'').
- Light Size with Black Base: 96mm x 20mm x 10mm (3.8'' x 0.8'' x 0.4'').
- EASY TO INSTALL - 2 Wires Connection: Black is Negative and Yellow is Positive. FREE screw set & Foam tape bases are included..
Check StockGLL 10pcs White T5 LED Bulbs 74 70 37 17 2721 3528 5mm LED Bulbs 1-3030-SMD for Car Interior Speedometer Dashboard Instrument Gauge Cluster Indicator Light Panel Dash Lamp
- SUPER BRIGHT T5 LED bulb, Package includes 10pcs of high quality dashboard LED bulbs each designed with 1 LED (3030 SMD), 60LM per bulb, Color Temperature is 8000K white, Voltage DC 12V, Wattage 0.44W per bulb.
- Wide Compatibility: T5 5MM LED bulbs perfectly fit for T5 Wedge Type 3528 17 18 27 37 58 70 73 74 79 85 86 206 207 286 306 307 308 406 407 2721 etc.
- Multi-functional Use: T5 LED bulbs can be used as Speedometer, Odometer, Tachometer Light, Dashboard Lights, Gauge Cluster Indicator, Shifter Indicator, Side Light, Indicator Light, Instrument light.
- Air conditioning Indicating Lamp, Center Console Light, Interior Light, reading Lights Vanity Mirror Light, Glove Box Light etc.
- Easy installation: T5 LED bulbs install easily in minutes, no need to use a tool, just plug and play. The LED is polarity sensitive. You can turn it 180 degree if it does not light up.
- Buy with Confidence, we provide 2 years support for our product. Please feel free to contact us if you have any problem.
Check Stock