Top Led Pedestrian Signal Module

Badlands Motorcycle Products Turn Signal Load Equalizer III

  • Fits: 2010-2013 Street Glides and Road Glides only.
  • Eliminates rapid flashing of turn signals.
  • Can be used with most custom turn signals (including halogen and LED signals).
  • Plug and play waterproof module works specifically with HD OEM alarm systems (TSSM) or HD turn signal module (TSM).
  • 100 percent solid-state and produces virtually zero heat, unlike load resistors.
Check Stock

ICC/Intervox MEO-627PN-02-643, Condenser Microphone 6.0 X 2.7

  • DEPENDABLE TO USE: The Mic sensor sound module is professional manufacturing, voice detection module has high performance, strong reliability, making sure safety use..
  • MAIN FUNCTION: This microphone sound detection module can detect sound strength of the environment, with high accuracy, great for professional usage..
  • ANALOG OUTPUT: The microphone sensor sound module supports analog voltage signal output, the signal amplitude is VCC/2, stable to use..
  • ADJUSATBLE GAIN: The mic sensor voice module has high sensitivity, built in amplifier circuit, and the gain can be adjusted as needed..
  • AD COVERSION: The microphone voice detection module can obtain the voltage signal of sound intensity through AD conversion..
Check Stock

Hazard Warning LED Flasher Relay for GM Turn Signal Relay Flasher Module, Fix Hyper Flash, Replace LM487 10383321 15231201 15764135

  • Fixes Turn Signal ProblemLed flasher relay fixes for GM, GMC, Chevrolet problem with no turn signals or with 4 way flashers coming on when the directional is actuated..
  • FeatureIf you're going to do a LED light upgrade for your GM vehicle, this turn signal relay module is a must have item - solve the hyper flash problem with simple a plug and play..
  • FitmentsLed turn signal flasher compatible with 2003 2004 2005 2006 Silverado Tahoe, Sierra, Yukon, Avalanche, Suburban. Replace Part Numbers: LM487, 10383321, 15231201, 15764135..
  • NoteUse this gm led flasher relay for led turn signal, never cut your factory wires and install a load resister. (use the load resister basically shorting out the circuit).
  • Installation TipsTake out the dash cluster cover, remove two screws on the bottom of the steering wheel cover panel. Take the panel out. Use a clamp wrench to take out the original flasher, plug this flasher relay in, test the signals to see if hyper flashing goes away, then you are done..
Check Stock

iJDMTOY Complete Set 7-Color RGB LED Angel Eye Halo Rings Compatible With BMW E39 E46 3 5 7 Series Headlights w/ Wireless Remote

  • Made with high quality 3-Emitter 5050 RGB SMD LED lights, 4 pieces LED Rings, in total 96 pieces 5050 SMD LED lights.
  • Comes with revolutionary new lens covers for a fluid, continuous output and comes with newly upgraded Radio Frequency remote control with 60 ft range.
  • 7 Colors includes Red/Green/Blue/Amber/Magenta/Cyan/White, all necessary brackets and clips are included.
  • Tap the red/black wires from the module box to turn signal lamp stage-1 or red wire to ACC/Ignition, have the receiver of the module box placed behind....
Check Stock

ACEIRMC Digital 38khz Ir Receiver Ir Transmitter Sensor Module Kit for Arduino Electronic Building DIY ， Pack of 6 Sets

  • This ir transmitter sensor module is directly launched by a single tube, it requires waveform modulation through the program..
  • It is suitable for infrared communication, infrared remote control, apply to a variety of platforms including for Arduino/51/AVR/ARM.
  • With signal indicating LED, easy to observe and debug..
  • Pin Definitions: (1) Output (2) Vcc (3) GND.
  • IR Infrared Transmitter Module Ir Digital 38khz Infrared Receiver Sensor Module For Arduino Electronic Building Block.
Check Stock

GIDERWEL 12 Channel DMX Decoder RGB LED Controller 60A PWM DMX512 Dimmer Driver for RGB LED Strip and LED Module Light DC12V-24V

  • Receives standard DMX-512 digital control signal and transformrd it into PWM signal to adjust LED Lights.
  • Automatically adapt to DC5V-24V,Maximum power load: 300W (5V).
  • Aluminium housing,And High Power Output Max 60A For 5A Each Channel (5A*12 CH).
  • The DMX address can be set through dip switch,And You could connect with DMX digital console to achieve RGB dimming functions.
  • Easy Use for 4 Group RGB LED Strip,LED module And LED lights..
Check Stock

HiLetgo 2pcs 0.36\ 4-Digit Tube LED Segment Display Module Red Common Anode TM1637 Drive Chip Tube Clock Display for Arduino UNO R3

  • 4-digit LED display module with LED brightness adjustable and clock point..
  • Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable..
  • The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on..
  • Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
Check Stock

2pcs Ultrasonic Module HC-SR04 Distance Sensor with 2pcs Mounting Bracket for Arduino Uno R3 Mega 2560 Nano Raspberry Pi 3 Smart Robotics Projects

  • HC-SR04 Ultrasonic Sensor Distance Module:using IO trigger for at least 10us high level signal..
  • The Module automatically sends eight 40 kHz and detect whether there is a pulse signal back..
  • If the signal back,through high level,time of high output IO duration is the time from sending ultrasonic to returning.Test distance = (high level time velocity of sound (340M/S)/2..
  • Resolution:0.3 cm,Module precision:blind spots (2cm)-SUPER CLOSE..
  • The module performance is stable,measure distance accurately.SRF05,SRF02 ultrasonic ranging module comparable.This module is compatible with GH-311 anti-theft module..
Check Stock

Analog Voltage to PWM Signal Converter, 0-5V/0-10V Analog Input Voltage to 0-100% PWM Signal 2KHZ-20KHZ Converter Module,for PWM Motor Speed Control Interface Circuit Activity

  • Voltage to PWM Signal Converter Module: This module can convert 0-5V or 0-10V analog input voltage into 0-100% PWM signal..
  • Wide Application: This module is widely used for PWM motor speed control interface circuit, instrumentation AD interface conversion, and other applications that need convert voltage to PWM signal..
  • PWM Signal Frequency Range: The PWM signal frequency range is 2KHZ-20KHZ, maximum is 20KHZ, default minimum is 2KHZ,Hyuduo is committed to providing customers with high-quality products and thoughtful service..
  • Setable Output Frequency: The default function of this module is converting 0-10V into 0-100% 2KHZ PWM signal, but the output frequency can be set by adjusting potentiometer as needed,stable and reliable performance, practical, easy to operate and use, has a long service life..
  • Two Kinds of PWM Signal: There are two kinds of PWM signal, PNP-PWM output and NPN-PWM output. The PNP-PWM output is only 5V level, NPN-PWM output is 5V and 24V level,If you have any problem,please contact us, we will strive to provide you with satisfactory service!.
Check Stock

SONICAKE 9V DC 5-Way Daisy Chain Cable Right Angle Plug Daisy Chain Power Cable for Guitar Effects Pedal

  • ♫【Multi effect pedal】- 3-in-1 with Echo, Ensemble(Chorus), Overdrive Effects. - Zinc-alloy chassis, stable and strong. - Small, light weight and exquisite. - LED indicator shows the working status..
  • ♫【Echo Module】- Analog signal path, warm, vintage delay sound. With 2 Modes: Mod, Normal..
  • ♫【Ensemble Module】- Plunge into the ENSEMBLE module to take your sound to a brave new world. Fine tune the onboard Rate and Depth knobs to beef up your cleans or give some extra body to your drives..
  • ♫【Overdrive Module】- Classic Tone, Gain and Level controls, with 2 modes: High and Low, give you access to classic tube amp sound and powerful crunch sound..
  • ♫【Power Supply】- 9V DC(negative in the center) power supply required(NOT INCLUDED). All Vivlex Pedals have a ONE-YEAR GUARANTEE. We strive for our customer satisfaction at best possible..
Check Stock

PC Interface Controller

  • 【One-year after-sale warranty】The PWM to voltage module converts PWM digital signals to 0 to 10V analog signals. It can be used to switch the signal interface of PLC or other industrial control board. Adjust the output voltage by adjusting the PWM duty cycle. The module is small in size and easy to apply in different places.003cbr003e.
  • Using MCU embedded technology. Easy to operate, can be fine-tuned by potentiometer.003cbr003e.
  • Select the PWM signal input level range by short circuit. The module is small, easy to carry and easy to use.003cbr003e.
  • (current greater than 100mA)，PWM signal receiving frequency range: 1KHZ-3KHZ.
  • When power on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to PWM and GND. Jumper caps set the corresponding voltage range. When the frequency is 1KHZ-3KHZ, use a multimeter to measure the two ports of VOUT and GND. At this time, the meter displays about 5V. Adjust the potentiometer on the board so that the multimeter displays 5.00v.003cbr003e.
Check Stock

HiLetgo HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino

  • Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane.
  • Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid..
  • Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART &Storage Temperature:-40℃~+150℃&Signal coverage: 30ft &Item size: 4.3 * 1.6 * 0.7cm &Item weight: 3g..
  • The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect..
  • Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices..
Check Stock