Top Led Ribbon Connector Cable

uxcell 34P 34 Way 2.54mm Pitch F/F IDC Extension Flat Ribbon Cable Gray 66cm Long

  • Connector Type: 34 Pin Female to Female IDC Connector.
Check Stock

Screw Terminal Block Breakout Shield Module for Arduino UNO R3

  • Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Uno module..
Check Stock

FSJEE 4 Pin LED Strip Connector Kit for 5050 10mm LED Light Strip,Include 8 Types of Solderless LED Strip Accessories,Provide Most of Parts for DIY LED Strip Lighting Project

  • 1. Application ---- 4pin 10mm LED quick connector kit suitable for 10mm wide SMD 5050 RGB LED ribbon lights,connecting non-waterproof and waterproof LED strips,but need peel off the coating of waterproof LED strips..
  • 2.High Quality ---- Flame retardant PVC is durable and flexible. The pure copper wires inside are tin-plated, ensuring perfect electric conductivity and longer lifespan..
  • 3.DIY Combination ---- RGB Extension cable connector kit-This is a perfect accessory kit for your LED strips.It includes multi of connectors and almost meet all the connectors which used in your DIY colorful LED lighting program and showing the best effects..
  • 4. Easy Installation ---- RGB 4pin 10mm LED strip connectors are flexible and durable,Can be jointed with connectors by yourself.No soldering,no stripping ,just snap down quickly and vigorously with a pliers then you can enjoy your colorful lighting effects.These LED connectors support current Max 3A @24V and Max 6A @12V input..
  • 5. Warranty ---- 24months warranty for all FSJEE LED strip connectors, 90 days money back guarantee for any reason, 24 hours online customer service..
Check Stock

CableCreation Internal Mini SAS HD Cable, 1.6FT Mini SAS SFF-8643 to Mini SAS 36Pin SFF-8087 Cable, Mini SAS 36Pin to SFF-8643 Cable, 0.5M

  • Internal Mini SAS data + power cable connects a SAS controller to 4 separate SAS HDD drives.
  • Forward fanout cable has 1x latching SFF 8087 Mini SAS host connector and 4x discrete SAS target hard drive SFF 8482 connectors.
  • SCSI controller to SAS cable provides internal computer connectivity between a Serial Attached SCSI controller card host and direct attached storage hard drives.
  • 36 pin SFF-8087 Host connector and 4x SAS 29 pin SFF-8482 data and power Target drive connectors.
  • DIY or pro installers require a forward fan-out cable with an internal mSAS connector when expanding storage needs for Storage Area Network (SAN) or Direct Attached Storage (DAS) applications.
  • Sturdy molded connectors provide a secure connection.
  • Slim ribbon cables in a woven mesh sheath minimize airflow impact in a computer case.
  • Integrated SATA power supply cables make it easy to see what is connected.
  • Integrated SATA power supply cables make it easy t....
Check Stock

uxcell IDC Rainbow Wire Flat Ribbon Cable 10 Pins 66cm Length 2.54mm Pitch Type-B

  • 10 Pins Connector Flat Ribbon Cable, 2.54mm Pitch.
  • The "Type-B" means the pin holes towards to the same side, meanwhile, the two buckles are both inside..
  • Easily and directly inserted into PCB. Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors and pins..
  • Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors..
Check Stock

uxcell IDC Rainbow Wire Flat Ribbon Cable 10 Pins 148cm Length 2.54mm Pitch Type-C

  • 10 Pins Connector Flat Ribbon Cable, 2.54mm Pitch.
  • The "Type-C" means the pin holes towards to the same side, meanwhile, the two buckles are both outside..
  • Easily and directly inserted into PCB. Ribbon cable saves space and time on circuit interconnecting assemblies..
  • The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins..
  • Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors..
Check Stock

Cable Matters Internal Mini SAS to SATA Cable 3.3 Feet (SFF-8087 to SATA Forward Breakout)

  • Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives.
  • Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector.
  • Leverage hardware raid performance with this SATA multi-lane cable.
  • Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters.
  • Supports up to 6Gbs data transfer rate per drive.
  • DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
  • 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management.
  • Slim ribbon cables minimize airflow impact in a computer case.
  • Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity.
  • Woven mesh sheath covers half of the cable for easy routing.
  • P1 to P4 markers provide easy ID after installation.
  • Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce ....
Check Stock

[3 Pack] KEYGMA LED Strip Light Dimmer, DC 12V-24V Dimmer Switch for Strip Lights 2835 3528 5050 5630 5730 3014, Single Color

  • The 12 volt led dimmer switch is knob-operated control. You could easily adjust the brightness or turn on/off the strip lights or LED rope light via rotating the knob..
  • PMW dimming: 0-100% smooth dimming range, no flickering no humming..
  • Widely used for single color 2835/ 3528/ 5050/ 5630/ 5730/ 3014 LED strip light, LED rope or ribbon lights..
  • The cable lenght is 5.3 inches for each side and the body size: 2.56*1.26*1.34 inch. The LED strip light dimmer comes with a standard DC 5.5*2.1mm female/ 3.5*1.35mm male connector, easy to use and simple wiring..
  • Notes: DO NOT overload use. The Max. output current is 2A and the Max. output power is 60W. The supply voltage of the LED strip light dimmer is DC12V~24V..
Check Stock

RDEXP 0.5mm Pitch 20-Pin 200mm Length FPC Ribbon Wire Flexible Flat Cable Set of 25

  • The item FFC (Flexible Flat Cable) usually refers to the extremely thin flat cable often found in high density electronic applications like laptops and cell phones.
  • The each end cable is reinforced with a stiffener to make insertion easier or to provide strain relief.
  • This cable is for the Raspberry Pi ribbon connectors when connecting a peripheral such as an external display, camera, or the AlienSpec Ribbon Connector Breakout Board.
Check Stock

Phanteks RGB LED 4 Pin Adapter, Specified for Cases with Multi Colors RGB Control (PH-CB_RGB4P) Black

  • Compatible with upcoming motherboards with 4pin RGB Header.
  • Allows you to synchronize your Phanteks cases with Multi-colors LED control (Luxe, Mini XL, P400..) and Phanteks Led strip to the motherboards software..
  • Customize and colorize your LED strip and case LED with the use of the motherboards software.
  • Long cable length for easy wiring and cable management.
  • Length: 609mm (24in), Connector Number: 3.
  • Connector Detail:1x RGB LED Extension Connector (12V, G, R, B), 1x Motherboard RGB LED Connector, 1x RGB LED Strip Connector. Terminal Gender:M-FDescriptionPhanteks' RGB LED Adapter is a simple, frustration-free solution to the upcoming RGB integrated motherboards that includes the RGB headers. This adapter will allow you to synchronize and control the lighting of your LED strip and Phanteks cases with the motherboards' lighting software..
Check Stock

Wire Jumper Pin Connector, 620 Pcs Jumper Wire Cable Pin Header Connector Housing Kit Male/Female Crimp Pins Terminal with Storage Box

  • Dupont Connector Kit, This kit comes with the most common jumper wire pin housings in addition to male and female crimp pins.
  • Servo Connector Kit, These work great with all your typical breadboard style pin connectors and sockets.
  • Jst Connector Kit, Great selection of parts to make both male and female connectors is sizes from 1x1 to 2x6 pins.
  • Ribbon Cable Connector Kit, Come in a transparent box of classification management for convenient use and storage.
  • Jumper Wire Cable Pin Header Connector Housing Kit, There are total 620 pieces jumper wire connector parts which is good for home electronics prototyping.
Check Stock

Monoprice SCSI (HPDB) 68 Female to IDC 50 Female Adapter (100076)

  • The IDC 50 connector is a 50-pin 8-bit SCSI "header" connector used for internal-type ribbon cables.
  • It is also known as the "Alterative 2" connector.
  • It has parallel 25-pin rows and resembles an older ATA/IDE drive cable except that it is wider and has more pins.
  • The HPDB 68 connector is a 68-pin 16-bit SCSI-2 connector used for both internal and external connections (plastic for internal and metal for external).
  • It has parallel 34-pin rows but has the pins much closer together and is therefore narrower than the IDC 50 connector.
Check Stock