Top Led Submersible Trailer Lights

CZC AUTO 12V LED Submersible Left and Right Trailer Lights Stop Tail Turn Signal Lights for Under 80 Inch Boat Trailer Truck RV Marine-Replacement for Your Incandescent Bulb Units

  • All diodes are LED, NOT incandescent bulbs: 100% quality inspection before shipping including photometric inspection. The marine LED trailer lights have super high visibility and longer lifetime. The waterproof trailer tail lights comply with DOT standards which is tested by US lab.
  • Excellent Waterproof/Submersible Lights for Trailer: Sonic Welding Whole Sealing Technology ensures sealing solidity of the LED tail lights. Further more, every possible gap is sealed well with glue, such as wires entrance holes and edge of the lens. 18 gauge pure copper wires ensure trailer lights LED do good job underwater.
  • Easy to Install: 2 optional mounting ways - mounting on the back or the side of the trailer. Please make sure that connect wiring and no electronic short before marine/underwater. Wiring diagram comes with trailer lights, you can also find it in detail page.
  • CZC AUTO, a reliable brand in trailer lights industry, we offer 30-day money-back for any reason, 12-month warranty for quality-related issues.
Check Stock

12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15' 11LED Trailer Tail Brake Light Bar/License Plate Bracket

  • ... lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
  • This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
  • Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
  • white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
  • white is ground andblack is positive(mini side marker lights).
  • Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 white led) illuminates license plate.
  • 15″ LED trailer tail light bar with 11 LEDs provides stop, tail, and turn fun....
Check Stock

8Pcs 2 Inch Round Led Trailer Marker Lights, 4 Amber + 4 Red 2 Inch Round LED Side Marker and Clearance Marker Lights 4 LED Sealed Flush Mount w/Grommets and 2 Prong Trailer Wire Pigtails Waterproof

  • This listing includes 4 Pieces 2 Inch round amber led marker lights and 4 Pieces 2 Inch round led marker lights Red. These 2 Inch led marker lights are flush mounts to trailer trucks with rubber grommets and standard 2-prong wire pigtails. Sonically sealed, IP67 waterproof housing and lens unit is submersible.
  • Each 2 inch round led trailer side marker lights come with 4 LEDs, providing you better visability when driving on road.
  • These 2 inch round led trailer clearance lights are universal for almost all 12v dc vehicles, such as Semi Truck Trailers, Utility Truck, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV etc..
  • Wiring tips of Each 2 inch round trailer lights: white is the negative and black is the positive.
  • Outer Diameter: 2.5"in., Inner Diameter: 2"in., High w/ Grommet: 1in.(depends how in you press the lights), you may need to drill a hole about 2-5/16" to install these 2 round led marker lights.
  • Notes about these 2 inch round trailer LED clearance marker lights: these 2 inch round led lights can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, please install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Check Stock

Wellmax 10PC Heavy Duty Tent Stakes with 2PC Glow in Dark Rope 3/16 x50ft and 1/4 x50ft Black

  • FULL SERVICE KIT - Our trailer light kit has everything you need to get your lighting system up and running. Each kit includes two 12V LED tail and....
  • LONG-TERM USE - Did you know our trailer lights are waterproof and submersible? That means you can maneuver your trailer into bodies of water, worry....
  • FULLY COMPLIANT - Our lights are 100% compliant with DOT FMVSS108 standards. This ensures that your lights are federally compliant for visibility,....
  • COST EFFECTIVE - Our premium LED lights are high quality and packed full with value for long lasting lighting. LED lights can last 30-40 times longer....
  • FLEXIBLE SIZING - Our special LED trailer lights are outfitted for trailers measuring up to 80 inches wide. Our flexible sizing offers a one-size-fits....
Check Stock

MCRESOAR 2" Round Sealed Led Clearance Marker Light 4LED Grommet Mount RV Accessories, Round 2inch Led Side Marker Lights Kit Flush Mount with Wire Pigtails 10PCS (Amber)

  • Trailer Truck LED Sealed 2inch Round Clearance Side Marker Lights (10X Amber) with Grommet and Pigtails..
  • Simple installation: 2-WIRE, White is ground, Black is positive. Dimensions: Outer Diameter: 2.5"in, Inner Diameter: 2"in, High Diameter: 0.75in. (W/ Grommet).
  • Recessed mount with included black grommet, you can drill an approx. 2-5/16" hole and Includes industry-standard 2-prong plug with pigtail..
  • Universal fit for any Vehicles with DC 12V, Such as Semi Truck & Trailer, Bus, Service Van, Utility Truck, Pick Up Truck, UTE, UTV..
  • Functions as LED Side Marker, Clearance light, led trailer side marker lights, led trailer lights, led clearance lights, led submersible trailer lights etc..
  • If there’s any confusion about the product, simply contact us directly we will give you a satisfactory response within 12 hours!.
Check Stock

Carrep Submersible Square LED Trailer Lights Kit Waterproof 12V Utility Red LED Stop Turn Tail License Brake Running Light Lamp Under 80' Boat Trailer DOT Compliant

  • Widely Application + DOT Certification⭐ Designed for Trucks, trailers under 80", tractors, semi-trailer, Dump Truck, bus, boat, special vehicle,etc. The LED trailer tail Lights Serves 7 functions: Stop/Turn/Tail/Rear reflector/side reflector/side marker light/ license plate light..
  • All-in-one Kit⭐Trailer tail light kits has everything you need, with 1 Pairs trailer Lights + 2 gaskets + 2 amber clearance lights + one 22 feet and one 4 feet wiring harness + 1 license plate bracket + 4 reflective sticker + some screws..
  • Completely Sealed and Waterproof⭐ No screw on the lamp shade.Submersible Led Trailer Lights's lens and housing are completely welded together, The circuit board of tail light is seal..
  • High Visibility LED⭐ All diodes are LED, NOT Any incandescent bulbs! High Brightness LED Combination tail lights last more 30-40 times than standard incandescent lights.And trailer light kit uses less energy than traditional standard incandescent lights. It saves you time and money..
  • Installation Tips⭐Lamp with license plate light on the left side, the other on the right side. For wiring routing: Please see Product Description or User manual. Gifts for dad men him..
Check Stock

10Pcs 2 Inch Round Led Marker Lights, 2 Inch Round Trailer LED Side Marker and Clearance Marker Lights 4 LED Sealed Flush Mount with Rubber Grommets and 2 Prong Wire Pigtails Waterproof (5Red+5Amber)

  • ... with rubber grommets and standard 2-prong wire pigtails.
  • These 2 round led marker lights include grommets and pigtails for complete installation.
  • Each 2 inch round trailer marker light come with 4 LEDs, providing you better visability when driving on road.
  • Sonically sealed, IP67 waterproof housing and lens unit is submersible.
  • Wiring tips: Each 2 inch round trailer side marker lights includes a standard 2 prong wire pigtails: Black is the negative and red is the positive. Dimensions: Outer Diameter: 2.5"in., Inner Diameter: 2"in., High w/ Grommet: 1in.(depends how in you press the lights) , you may need to drill a hole about 2-5/16" to install.
  • These 2 inch round led trailer clearance lights are universal for almost all 12v dc vehicles, such as Semi Truck Trailers, Utility Truck, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV etc. Note: So these 2 round led lights can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, please install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light..
  • Warranty: 1 Year Warranty. If you have any questions or issues about our 2 inch round led lights, please feel free to us and we will repl....
Check Stock

10Pcs 2 Inch Round LED Side Marker Clearance Lights for Trailers, 5 Amber and 5 Red Sealed 2 Round LED Trailer Marker Lights 4 LEDs w/Rubber Grommet Flush Mount 2 Wire Pigtails Truck RV Waterproof

  • ... with rubber grommets and standard 2-prong wire pigtails.
  • These 2 round led marker lights include grommets and pigtails for complete installation.
  • Each 2 inch round trailer marker light come with 4 LEDs, providing you better visability when driving on road.
  • Sonically sealed, IP65 waterproof housing and lens unit is submersible.
  • Wiring tips: Each 2 inch round trailer side marker lights includes a standard 2 prong wire pigtails: White is the negative and black is the positive. Dimensions: Outer Diameter: 2.5"in., Inner Diameter: 2"in., High w/ Grommet: 1in.(depends how in you press the lights) , you may need to drill a hole about 2-5/16" to install.
  • These 2 Round LED Light Side Marker Clearance lights are universal for almost all 12v dc vehicles like Truck, Trailers,Pick Up,UTE, UTV etc. Note: So these 2 round led lights can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, please install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
  • 1 YEAR Warranty: Any problem in using our led trailer lights, please contact us directly please. your problem will be solved within 24 HOURS.
Check Stock

Partsam 2Pcs 8.5' Oval Led Tail Lights 40LED Red for Trailer RV Motorhome Airstream Oval Led Stop Turn Tail Lights Surface Mount Taillights Replacement Lights IP68 Submersible w/Mounting Gaskets

  • ...se oval led trailer RV stop turn tail lights need to be hooked up to a 12v dc power source and includes 40 LEDs each. LEDs are brighter and light faster, draw less current and generate less heat than incandescents and the built-in reflex lens provides increased light output for added safety. With a sonically sealed submersible IP68 waterproof rating, our rv led tail lights are better suited to deal with any different kinds of serious weather attack.
  • Installation: These surface mount 8.5" oval led lights are HARDWIRED with 3 wires: White is Ground, Red is oval stop brake light or oval turn signal light and Black is oval tail/running light.
  • They're surface mount with 2 holes to secure and you'd need a hole for the wires to go through as there's no room under the red tail lights. Also a mounting gasket goes in between the light and the mounting surface, which creates a tight seal and offers some cushion behind the actual light.
  • Dimensions: 8.5" x 6" x 1", 7.6" for horizontal hole distance.
  • These 12V DC 8 inch Oval trailer lights are universal for rv, motorhome, camper, Trucks, trailers, tractors, semi trailer, horse trailer, travel trailer, dump Truck, special vehicle etc. Anywhere you'd like as well as the size fit.
Check Stock

CURT 53201 Auxiliary Automotive LED Light Strips for Hitch Cargo Carrier, Bike Rack, 2-Pack, red

  • This new version 12v Trailer Light Kit includes 2 combination tail and turn signal lights, 2 amber LED clearance marker lights ,25-ft wiring harness,license plate bracket and mounting hardware bag, everything you need to do the install included..
  • IP67 Waterproof and Submersible, It is completely sealed, it mean no water can enter inside to damage the circuit board, it can work long hour in rainy days, fog day or snow day, it is totally submersible.
  • Compare with other low profile tail lights, this tail light's SMD 5050 lamp beads produces a super fashion and more brighter light, no glare, Up to 50,000 hrs life expectancy, improve the safety on road.
  • Compliant with DOT standards, application for under 80 Inch width towing vehicle, like truck, trailer, boat, bus, Lorry, Van, caravan, snowmobile, etc..
  • 25ft wiring harness( 21.65ft length wire harness and 3.93ft wire harness ), so that it is long enough to reach end of trailer, install instruction included..
Check Stock

ONLTCO 12V Red Led Square Submersible Trailer Lights, Turn Signal License Brake Tail Light Kit for Under 80 Inch Boat Camper RV Trailers Shorelander Marine, IP68 Waterproof, DOT

  • ... 2 Pcs Trailer Lights build in with License Plate Light, Turn Signal Light, Tail Light and Stop Light.
  • 2 Pure Copper Wires: Long Wire is 21.75ft, Short Wire is 4.05ft.
  • 1 Pc License Plate Bracket with lengthened mounting holes makes adjustable when installing license plate and a bag of mounting hardware.
  • ✅COMPLETE SUBMERSIBLE: We sank the light into the lake under 65ft for half an hour, then picked it up and the lights works well. Water-proof IP68, Sealed & Waterproof assemblies, engraved panel makes LED condense, and the light brighter. Please make sure wiring connect correctly.
  • ✅MATERIAL: Accessory Wires is 100% Copper Wires.
  • License Plate Bracket made from Polypropylene Plastic.
  • Trailer Lights’ tail light surface and turn signal light surface made from Polycarbonate Plastic with Reflective Function, it's safer to use in the dark. License Plate Light surface made from Acrylic Plastic,with crystal-like transparency, and the light is soft and clear.
  • and black shell is made from Polypropylene Plastic. Screws and nuts on the lights are made from 304 Stainless Steel.
  • ✅ALL LED: The lights are all led, 12 LEDs in trailer light surface, 4 LEDs in license plate light surface, 1 LED in turn signal Light surface. Complies with DOT standards.
Check Stock

Partsam 30Pcs 3.8

  • ...s or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
  • These lights don’t come with the on/off switch and Wire leads come out the back in the center so you must drill a hole in the mounting surface for them.
  • 5.These are Waterproof, not submersible. Please do not use it under water.
  • 2. These lights can not be set up to flash as strobes, of course, you can wire to a toggle (on/off) switch to make it come true.
  • Tips and Warranty: 1. These led lights are not dimmable.
  • The indicator light is hardwired with 2 wires and can be used as constant on trailer lights: black is negative and the other is positive(Red wire for red lights, white wire for white lights and yellow wire for amber lights).
  • 4. These trailer lights are polarity dependent and They will not work if polarity is reversed.
  • We offer 1 Year Warranty for these lights.
  • These small clearance lights needs to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp).
  • We also have customers asking whether they can be use as turn signal lights, brake lights or backup lights, they can, but they may be not that bright.
  • Package includes 30 pieces 3.8″ Inch Led Trailer Lights 6L....
Check Stock