Top Left hand Thread Screws

Taprite Regulator Guage, 0-2000 PSI, Left Hand Thread

  • 0-2000 PSI replacement gauge for a regulator requiring a left handed thread.
  • 0-2000 replacement gauge for regulators that required left hand thread on high pressure side..
  • Shipping rate is for the Continental US ONLY..
Check Stock

Floyutin 10 PCS Stainless M8 Wing Nuts Metric Thread Butterfly Clips Fasteners Kit

  • Measurement (Appr.): M8x1.25 304 Stainless Metric standard wingnuts. M8 stands for Metric thread inner diameter(8mm/0.31"), thread pitch 1.25mm.Thread Max outer diameter 0.61"/15.6mm,thick 0.35"/9mm.the wing thick 0.2"/5mm, wing length 0.75"/19mm : Fit on to M8x1.25 screws/bolts. Fully threaded, Right hand direction. More detail size please refer to the photoes..
  • Thumb nuts with 2 butterfly wing on each side. Hand twist without tools, Fit for finger tightening or lossening. Allows you to adjust the tightness of the legs easily. Wings are thick(0.34") and don't see an issue with any bend distortion..
  • Easy to install: Serve as a nut, Use metric screws or apprapriate sized bolts to mount ss wing nuts. Just spin on on easily, tighten nicely, and stay in place. Please choice the right metric thread size match bolts or screws and driver..
  • Multi-purpose Application: SS heavy duty threaded can be mounted with bolts. Used it for quick disconnect on bolted connection.Just for hanging bird houses,furniture decoration,hardware lighting, marine battery posts. Better replace the old nuts for getting adjusted or temporarily removed pretty often..
  • 10 pcs wingnuts included. No Bolts/Dirver included. Made of 304 stainless steel, good solid .corrosion resistant,sturdy and ....
Check Stock

#6-32 UNC Flat/Countersunk Head Socket Screws,100-Piece,Stainless Steel,Full Thread,Right Hand #6-32 x 1-1/4

  • Driver type: Hex Key/Allen Key/Hex wrench/Hex Bit.
  • Stainless Steel, Full Thread, Right Hand.
  • #6 Countersunk Head Socket Machine Screws.
Check Stock

Ball Joint Kit,Set of (3) Tie Rod End with grease fitting Fits for Club Car DS Golf Carts (1976-2008)

  • Fits Club Car DS electric golf cart models 1976-2008.
  • Brand new high quality Club Car DS tie rod end ,Allows your steering and suspension the ability to perform properly..
  • Ball Joint,Left-Hand Thread(included 2Pcs),OEM#7540.
  • Ball Joint,Right-Hand Thread(included 1Pcs),OEM#7539.
  • Set of (3) Right and Left Thread Tie Rod End.
Check Stock

MCMASKE #2-56#4-40#6-32#8-32#10-24 1/4 -20 5/16 -18 UNC 304 Stainless Steel Socket Head Cap Screws Assortment Kit

  • They are coarse thread.Screws Thread Diameter: #2,Thread Pitch: 56 Per Inch.
  • #6,Thread Pitch: 32 Per Inch.#8,Thread Pitch: 32 Per InchThread.
  • 304 stainless steel have good chemical resistance and may be mildly magnetic.
  • The assortments contain the following sizes:#2-56x3/16"(20PCS).
  • The #2-56 to 5/16"-18 UNC 304 Stainless Steel Socket Head Cap Screws Kit are includes most common SAE standard sizes so you can easily replace a lost screw.
  • Packed in a plastic box,Easy to install and durable to use.
Check Stock

.500' 1/2' Rod End Heim Joint Right and Left (2 joints)

  • Includes 1-left hand thread and 1-Right Hand thread Heim set. Jam nut included..
  • 1/2" bolt hole (Grade 8 or better recommended).
Check Stock

MOSNAI Golf Cart Ball Joint Kit Tie Rod End for EZGO TXT 2001-up Electric or Gas Golf Cart Driver and Passenger Side 70902-G01 70902-G02 (2 PCS)

  • ✅【Fit Models】Golf cart EZGO tie rod ends ball joint, fits 36V EZGO TXT 2001-up electric & gas golf carts..
  • ✅【Replaces OEM Part】Driver side-left hand thread (included 1Pcs), OEM#70902-G01.
  • Passenger side-right hand thread(included 1Pcs), OEM#70902-G02..
  • ✅【Function】EZGO tie rod ends, replacing your worn tie rods will improve your carts steering and reduce tire wear..
  • ✅【Easy Installation】The boots contain grease, don't need to add extra. Replaces your worn out or damaged parts directly, no need to modify the vehicle..
  • ✅【Package Content】1PCS 70902-G01 left-hand thread outer tie rod end + 1PCS 70902-G02 right-hand thread outer tie rod end, premium quality materials to provide a long service life..
Check Stock

M5 Flat Countersunk Head Socket Screws,Pack 20-Piece,Stainless Steel,Full Thread,Right Hand,Metric M5 x 100mm

  • M5 Flat Head Socket Screws, Thread Dia.5mm,.
  • Head Diameter: 10mm, Head Height: 2.8mm, Thread Pitch: 0.8mm.
  • Driver type: Hex Key/Allen Key/Hex wrench/Hex Bit.
  • Stainless Steel, Full Thread, Right Hand.
  • M5 Countersunk Head Socket Machine Screws.
Check Stock

M12 x 1.25 Metric 12MM High Speed Steel LEFT HAND Plug Tap 4FL LH

  • 12 mm x 1.25 mm 4FL high speed steel LEFT HAND high speed steel plug tap.
  • Package Included: 1 piece of M12 x 1.25 Plug Tap.
Check Stock

MCAMPAS 350PSI Soft Nose P.O.L valve with 12 Feet Propane Weed Burner Torch Hose Adapter for Use Connects to U.S.Any Standard Propane Tank to Propane Weed Burner Torch Head Burner

  • ➤Suitable use fit American standard 5lb-100lb PPOL valve regulator propane tank, Converts POL LPG propane tank service valve connects to propane weed burner.
  • ➤12 Feet 350 psi high pressure propane hose can extend enough propane tanks to connect to propane torch weed burner to safely use the space.
  • ➤Propane weed burner torch hose adapter outlet joint is 5/8” parallel pipe thread Joint （3/8"-19 Left Hand Internal Thread.)compatible with standard propane torch gas burners whose inlet thread diameter is 5/8" adapter.
  • ➤The POL lp tank service valve propane hose adapter has passed CSA certification and has an internal overcurrent protection mechanism to prevent leakage. POL safety valve with handle (loose by turning right, tight by turning left) connects to any standard propane tank has lp tank POL service valve.
  • ➤It replaces the problematic propane hose adapter on the propane weed torch. NOTE:, before purchasing, please check whether the propane weed torch air inlet connector is compatible with the 3/8"-19 internal thread left-handed or joint thread diameter is 5/8" joint.
Check Stock

Inside Handle Storm Door Latch Almond-Turn Handle Only

  • Color is STANDARD STORM DOOR ALMOND-Surface mount inside handle for inside of door-ONLY FITS DOORS WITH A 5/16 INCH Spindle (Square Shank that connects inside handle to outside handle).
  • Screw holes on 1-3/4 inch centers-Fits right or left handed doors-Screws NOT INCLUDED. WE DO NOT KNOW THE LENGTH OR THREAD SIZE REQUIRED FOR YOUR DOOR..
  • STRIKE NOT INCLUDED-If Strike is needd Amazon item: IR-DB-01-STRIKE or B00PR7GQNG.
  • SPINDLE NOT INCLUDED - ONLY FITS DOORS WITH A 5/16 INCH Spindle (Square Shank that connects inside handle to outside handle).
  • DOES NOT FIT ALL DOORS: Fits many models of Anderson, Cole Sewell, EMCO, Larson, and Pacesetter and many other storm doors.
Check Stock

M72 x 3 Left Hand Tap LH Metric Thread Tap HSS Plug Tap Ship by Express Delivery in 4 days

  • M72 x 3 Left Hand Tap LH Metric Thread Tap.
  • We will send by Express, clients can receive in 4 days.
Check Stock