Top Left handed Hss Threading Die

Electric Pipe Threader Tool Kit 2300W 110V, Portable Handheld Electric Pipe Threader Threading Machine With 6 Dies 1/2-Inch to 2-Inch Pipe Threading Die Heads, Ratchet Pipe Threader Kit

  • Lightweight design makes these hand-held pipe threading tools one of the easiest to handle threaders in the RIDGID line.
  • Durable, die-cast housing and fiberglass-reinforced plastic body make this hand-held threader ideal for harsh working conditions.
  • Built for use with RIDGID 11-R Drop Head Die Heads to easily cut pipes ranging from 1/8 inch to 1-1/4 inches (3 mm to 30 mm) in diameter.
  • Convenient dual V-jaw support safety arm delivers the sturdy, reliable support needed to withstand both the machine’s weight and threading forces.
  • Rugged metal carrying case protects the pipe threading machine while keeping multiple die heads neatly organized for quick and easy transport.
Check Stock

Hanson 1765531 Pts Drill Plus Tap Combo 6-32' Number 36 for Tap Die Extraction

  • This tap and drill set contains a convenient HCS tap and HSS drill bit.
  • Self-aligning taps start and thread straight virtually every time.
  • Great for through holes and irregular surfaces.
  • Plug taps are ideal for general purpose threading.
  • Special chip-breaking technology cuts chips easier.
Check Stock

Lighthouse quality tools - M14X1 LH HSS Adjustable Round Threading Die

  • Fits RIDGID NPT universal machine die heads 504A, 711, 713, 811A, 815A, 816, 817 and 842.
  • High-Speed threading die for stainless steel.
  • Threading dies have capacity of 1/2-inch to 3/4-inch.
  • Right-Hand, NPT (National {American} Pipe Tapered) thread.
  • RIDGID 47765 NPT dies have 14 TPI (Threads Per Inch).
Check Stock

5 PC 1/2'' Indexable Carbide Insert Lathe Turning Tool Bit + 10 Pc Tips COMBO

  • -5 pcs of TCMT3252 insert with chipbreaker, C6 Carbide grade for tool steel.
  • -Style included: AR - right hand, AL - left hand, BL - left hand 15 angle, BR - right hand 15 angle, style E - threading tool 30 angle.
  • -2 each Style A 0° for Turning, Facing, Boring, and Chamfering, 1 pc of left hand and 1 pc of right hand.
  • -2 each Style B 15° for Turning, Facing, Boring or any lead angle can be used , 1 pc of left hand and 1 pc of right hand.
  • -1 each Style E 30° for Turning, Facing, Boring, Chamfering, Threading and "V" Grooving.
Check Stock

COMOWARE Screw Extractor & Left Hand Drill Bit Set- Broken Bolt Remover HSS M2, 10pcs with Metal Index Case

  • EASY OUT REMOVING: It is more convenient and easy to remove the broken screw from the damaged workpiece by using the left hand drill bit which coordinates with the screw extractor. Spiral groove on screw extractor can go deep into screw to increase grip force to remove studs, screws and bolts around the house, garage or on your job project..
  • HIGH QUALITY CARBIDE MATERIAL: The left hand drill is made of HSS M2. Compared with ordinary high speed steel, M2 material can prolong the service life, enhance wear resistance and remove chippings clearly. HSS are harder and tougher than other materials..
  • UNIQUE DESIGN: The 118°angle makes it easier to cut into the workpiece with small axial resistance. This design can not only increase the length of cutting edge work but also decrease the nominal thickness of cutting layer, which improves heat dissipation and durability with better cutting effect..
  • CONVENIENT ORGANIZATION AND STORAGE: Come with a index case, convenient to use and carry..
  • SET INCLUDING: 5pcs alloy steel screw extractors and 5pcs HSS M2 left hand drill bits. Screw extractor in....
Check Stock

M26 x 1.5 Tap Thread Right Hand M26x1.5 Straight Fluted Machine Threading Tap RH M26 x 1.5 Metric Thread Milling Tap HSS 26 x 1.5

  • Package included: 1pc HSS M26 x 1.5 metric right hand thread tap M26x1.5..
  • Thread Type: Right Hand Thread M26x1.5 Tap RH.
  • How to use:Start tapping after boring holes corresponding to the thread size by using drill bits.On hand tapping, operate tapping in an upright position parallel to bored holes by using a tap wrench..
  • My Note : Multi purpose tool Suits a variety of applications for threading and tapping..
Check Stock

Threading & Tapping attachment-lathe tailstock die holder set MT3

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT3 Shank, that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
Check Stock

Threading & Tapping attachment-lathe tailstock die holder set Machine Tools MT2

  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine.
  • Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • The Die for threading purpose is hold in the various Die holder sizes. The internal bore threading/ tapping is done by mounting the tap wrench head as....
  • Comes in precisely ground MT2 Shank, , that goes inisde your lathe tailstock & intended job for threading / tapping is hold in rotating chuck..
Check Stock

Accusize Industrial Tools 1/2 x 1/2 x 4 in. (Width by Height by Oal) Hss+5% M35 Cobalt Lathe Tool Bit, 5095-0032

  • M35 Cobalt (HSS + 5%) square lathe tool bits blank, much harder and more durable than M2 high-speed steel lathe tool bits.
  • Ground for heavy-duty cuts on casting and forgings. It has significantly higher wear resistance than M2 HSS。.
  • You may machine it to turning tools to do any lathe turning operations. The possibilities are infinite..
  • Step turning, taper turning, chamfer turning, contour turning, facing, grooving, parting, cut-off, internal threading, outside threading, boring, knurling, etc..
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit

  • Instead of other kits which are made of low carbon steel, our kit are made of *** bearing steel*** which are more stronger, good abrasion performance. An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood..
  • Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications.
Check Stock

86-Piece Master Tap and Hex Die Set, Premium Titanium Coating | SAE Size #4 to 5/8”, Metric Size M3 to M16 | For All Coarse, Fine, Pipe Threads | Complete with Holders, Stocks, Gauges and Metal Case

  • [ALL-IN-ONE SET]: This is a master tap & die set that includes a full range of SAE standard and Metric sizes from small to large with both coarse and fine teeth, designed for all kinds of internal and external threading, rethreading, or thread repairs jobs.
  • [PREMIUM MATERIAL AND COATING]: Industrial grade high speed steel (HSS) construction with unique titanium coating provides maximum strength and lasts 3 times longer than normal ground finished tap die for rust and corrosion prevention.
  • [EXCELLENT CUTTING PERFORMANCE]: All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance on a wide range of materials such as wood, carbon steel, cast iron, aluminum, brass, copper, stainless steel.
  • [HEXAGONAL SHAPE DIES]: Hex dies can be used with wrenches and sockets for added leverage, so they work much better than round dies for greater torque applications and in tight spaces. Hexagon dies fit both needs to create new thread or chase old thread, while round dies are usually to create thread only.
Check Stock