Top Lid Support

Heavy Duty Lid Hing Soft Close, Zishengho Toy Box Hinge for Toy Chest Lid Support Hinge Keep Lid Stay Open Safety for Cabinet Kitchen Wardrobe Toy Chamber Max Support 50lb/2pcs

  • HEAVY DUTY LID HINGE WIDE APPLICATION—The lid hinge support the lids of box, such as toy box, cabinet, wardrobe lids. Good for any lids or flaps when a soft closing motion is required..
  • HOLD LID STAY OPEN--- The toy box hinge will keep the lid open until you want to close. Never worry about having to support lid hinge anymore. Heavy toy chest lid to prevent fingers from getting smashed..
  • MAX SUPPORT 50LB—Lid stay hinge max weight support 50lbs/2pcs, Lid can be installed in the left or right side. Upward door open adjustable angle of 75°,90°,110° by yourself..
  • STABLE MATERIAL-- The metal version has the advantages of strong bearing capacity, Metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance..
  • EASY INSTALL OF CHEST TOY HINGE– Only following the placement measurements of the instructions, you will install lid stay easily..
Check Stock

2 Pcs Toy Box Hinges Soft Close - Lid Support Hinges Heavy Duty Adjustable Metal Lift and up Hinges Cabinet Door Support Hinge

  • 【Material】Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance: Max-weight 40 lbs when use 2 pcs（up to 20lbs - 1 Lid Stay）.
  • 【DURABLE LID SUPPORT HINGE】each lid stay can be used for right or left hand mounting,holds the door at any angle you want,upward door open adjustable angle of 75°,90°,110°,self adjust, easy to use..
  • 【Adjustable for different weights】With wrench included in the package, the support hinges are fully adjustable for different weight by turning the screw in the middle of the arms to set up appropriate pressure so that the lid can be slided down gently without smashing fingers. (in most cases，turn right to increase load capacity).
  • 【Multipurpose Lid Support Hinge】These elegant form of support hinges are well made and designed to support the lids of small box, such as toy box,cabinet,closet,wardrobe lids,The arm with graceful body curve adds classic luxury to your furniture..
  • 【Package】2 pcs lid stays,allen wrench and screw are included.
Check Stock

Ravaver Toy Box Hinges Soft Close, 26LBS-34LBS Heavy Duty Lid Stays 90 Degrees Open with Easy-to-Install Card, Sold in Pairs (Black)

  • GENTLE CLOSING: All-New hydraulic slow-down mechanism for improved stability and safety. The lid stay will close lid softly while holding up with sturdy support, and prevent slammed doors and smashed little fingers.
  • STRONG SUPPORT: For lid height of over 18in, handle lid weight from 13lbs to 17lbs per hinge, while 2 hinges double weight support from 26lbs to 34lbs. For lid height of over 25in, each hinge supports 7-9lbs and both hinges do 14-18lbs.
  • LOCK LID OPEN SECURELY: Hold your lid open at max 90 degrees until you are ready to push it shut. Never worry about having to prop the lid open.
  • ONLY TAKES 5 MINUTES TO GET INSTALLED by following the placement measurement card. Note: one hinge for left-hand mounting, and the other one for right-hand mounting.
  • BEFORE PURCHASING: Do not support the lid at width over 45in and height over 28in. Easy to lift and lower the top of storage chest, window seat bench, piano bench and more trunk.
Check Stock

Lid Stay Hinge Soft Close Safety Lid Support Toy Box Hinge 25-50lb for Toy Box Kitchen Cabinet Wardrobe of Top-Upward Opening & Top Flap Doors

  • LID STAY HINGE ROTATE ONE WAY TO LOCK LID OPEN- Soft close hinges will keep your lid open until you push hinge down. Keep the lid stay in place at different angles when the opening angle is larger than 90°. Lid support hinge is suitable for doors of cabinet, toy box, kitchen, wardrobe, storage chest cupboard and so on..
  • SOFT CLOSE SAFETY HINGE -- Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Lid will slow the descent when the opening angle is less than 70°..
  • WEIGHT CAPACITY– 25-50lb Lid support hold 12lbs-22lbs/1pc. 2 hinges support 25-50lbs..
  • DURABLE HEAVY DUTY HINGE--Lid Support Hinge is made of zinc alloy, multi-layer electroplating solid process casting, fine workmanship. corrosion resistance and anti-rust durable and practical..
  • EASY TO INSTALL ONLY 5 MINUTE–Each lid hinge can be used for right or left hand mounting, easy to install by following the placement measurements of the instructions..
Check Stock

Toy Box Hinge Soft Close, Lid Stay 105 Degree Open--Zishengho Lid Support Hing for Toy Chest and Upward Top-Opening Doors, Safety Easy Installation

  • LID STAY 105 DEGREE WITH SOFT CLOSE- Safety & easy to solution for toy box lid and kitchen cabinets, your lids will soft close and gently to avoid smashing fingers. 1pc lid stay support the range of door weight 6-10 lbs, Height 18-19 inch. 2 pcs hinges support 10-20lbs..
  • KEEP LID HINGE STAY OPENING- Never worry again about having to prop the lid open. This lid support can hold the lid open until you are ready to close. This lid stay is deal for Top opening or upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box..
  • EASY TO INSTALL TOY BOX HINGE- Only takes 5 minutes to complete the installation of lid hinge by following the installation measurement. Easy to follow installation instructions ensure a perfect install the first time! Each lid hinge can be used for right or left hand mounting..
  • COMPACT DESIGN OF LID STAY HINGE- The compact design allows for installation in tight areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree..
  • 100% MONEY-BACK GUARANTEE - If you are unhappy with the product for whatever reason we will refund you, no questions asked!.
Check Stock

Double Locking Bi-Fold Door Hinge

  • KEEP LID STAY OPEN — The lid support hinge holds the lid open until you want to close. Similar purpose of a gas strut but doesn't self lift, stays and supports lid where you want it. It's widely usage as hinges for wooden box, such as toy box hinges,chest hinges, also fit for overhead kitchen cupboard,wardrobe lids too.Perfect for any lids or flaps when soft close lid support is required..
  • DURABLE MATERIAL — Heavy lid hinge, max weight support 50lbs/2pcs.The up-grated version has the advantages of strong bearing capacity,metal connector instead of plastic clip.Made of premium quality zinc alloy with maximum corrosion resistance and durability the chest slow close hinges guarantee high performance..
  • EASY TO INSTALL — The lift and up hinges can be mounted on the left or right side,also used for side-mounting and top-mounting.Upward door open adjustable angle of 75°,90°,110°.It can fit for most lids and allow you to keep your lids stay at any angle.Just mark two drilling holes, and screw each mounting bracket. No need to use the diagram on the package！.
  • ADJUSTABLE TENSION — Adjust the toy box hinges soft close tension with Allen wrench to fit for lids with different weight.After installing the lid hinges for wooden box, please tighten the....
Check Stock

200N Gas Struts Toy Box Hinges Soft Close Cabinet Hinges Hydraulic Lid Support Hinge Heavy Duty Lift and Up Hinge for Kitchen Cabinets Pack of 2

  • [ What You Get ] -- Package Including 2 Set heavy duty lid support hinges and mounting screws. The soft close hinges overall length is 12.6 Inch,....
  • [ Heavy Duty Lid Support Hinges ] -- These soft close toy box hinge is constructed by premium cold rolled steel and copper core, corrosion resistant....
  • [ Soft Close Stay Hinge ] -- Our Lid support hinge built in hydraulic dampening device, is excellent safety solution for heavy hinged lids, Doors and....
  • [ Widely Used Safety Close Hinge ] -- The soft down lid support can be mounted for right or left hand use, designed to support lids lowing slowly and....
  • [ 100% MONEY-BACK GUARANTEE ] -- If you have any problem about our soft close lid support hinges, please feel free to contact us, we will do our best....
Check Stock

Slow Multiple Hinges Creak on Closet Door with Multiple Opens and Closes

  • KEEP LID STAY OPEN — The lid support hinge holds the lid open until you want to close. Similar purpose of a gas strut but doesn't self lift, stays and supports lid where you want it. It's widely usage as hinges for wooden box, such as toy box hinges,chest hinges, also fit for overhead kitchen cupboard,wardrobe lids too.Perfect for any lids or flaps when soft close lid support is required..
  • DURABLE MATERIAL — Heavy lid hinge, max weight support 50lbs/2pcs.The up-grated version has the advantages of strong bearing capacity,metal connector instead of plastic clip.Made of premium quality zinc alloy with maximum corrosion resistance and durability the chest slow close hinges guarantee high performance..
  • EASY TO INSTALL【 Important：Refer to our install videos ! 】 — The lid closer can be mounted on the left or right side, also used for side-mounting and top-mounting. Upward door open adjustable angle of 75°,90°,110°. It can fit for most lids and allow you to keep your lids stay at any angle. Just mark two drilling holes, and screw each mounting bracket. No need to use the diagram on the package！.
  • ADJUSTABLE TENSION — Adjust the toy box hinges soft close tension with Allen wrench to fit for lids with different weight. After installing the....
Check Stock

Douper Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors (Pack of 2)

  • LID STAY SLOW CLOSING - Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • CONDITIONS OF USE - Per lid stay hinge can support the range of door weight 3-10 lbs, Door Height Range18-19 inch. Weight support will be doubled by using 2 lid supports (6lbs-20lbs).
  • COMPACT DESIGN OF LID STAY HINGE - The compact design allows for installation in tight fit areas. Douper lid hinge supports opening the lid at a maximum angle of 105 degrees.
  • 2-WAY INSTALLATION – Douper hinges can be installed on Top opening or Upward opening doors. Each lid hinge can be used for right or left hand mounting..
  • ONLY TAKES 10 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video..
Check Stock

Douper Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors (Pack of 1)

  • LID STAY SLOW CLOSING - Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • CONDITIONS OF USE - Per lid stay hinge can support the range of door weight 3-10 lbs, Door Height Range18-19 inch. Weight support will be doubled by using 2 lid supports (6lbs-20lbs).
  • COMPACT DESIGN OF LID STAY HINGE - The compact design allows for installation in tight fit areas. Douper lid hinge supports opening the lid at a maximum angle of 105 degrees.
  • 2-WAY INSTALLATION – Douper hinges can be installed on Top opening or Upward opening doors. Each lid hinge can be used for right or left hand mounting..
  • ONLY TAKES 10 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video..
Check Stock

Rockler Lid-Stay Torsion Soft Close Hinges (Pair of 2, Rustic Bronze) – 60” Pound Lid Support Hinge Soft Close Cabinet Hardware – Bronze Lid Hinge Support - Heavy Duty Hinge Hardware

  • Lid Support Hinge Heavy Duty: This torsion hinge lid support allows virtually any size lid to open smoothly, hold its position (when opened to 90 degrees, beyond that the lid will swing open), and then easily close. Use the torsion calculator to help determine your ideal lid support hinge combination..
  • Lid Stay Slow Closing: These rustic bronze lid stay torsion hinges support any size lid by simply adding more hinges & can be installed for both overlay and flush fitting lids. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • High Raising: These rustic bronze cabinet door supports are specially designed for safety and the design of heavy duty hinges ensure that the seat top raised position is at an over center 90-degree angle to prevent the lid from falling unexpectedly..
  • Easy Installation: Our box hinges are designed to fit 3/4" thick stock & are easy to install (instructions included). For ultra-fast and easy installation on these heavy duty industrial hinges, use our Torsion Hinge JIG IT (sold separately)..
  • Perfect Design: These soft close door hinges are the best solution for lids or flaps on furniture, cabinets, cupboards, or wooden storage boxes when a soft closing is required. hinges are available ....
Check Stock

Toy Box Hinges Soft Close - Lid Support Hinges (Pack of 2), Safety Soft Close Hinges for Chest Toy Box, Slow Close Hinges,Lid Support Soft Close 105 Degree Open (APFFSY)

  • GENTLE SLOW CLOSE HINGES — It's heavy lid hinge and soft close lid support. Expecially excellent slow close and safety solution on chest hinges, toy box hinges. Lids will go down slowly and gently to avoid slams shut and crush the little fingers of children!.
  • KEEP LID STAY OPEN — The lid support hinge will hold the lid open until you want to close. Never worry about having to support lid by hand anymore. It's widely usage as slow close hinges for toy box hinges, chest hinges, also fit for overhead kitchen cupboard, wardrobe lids too！.
  • SMALL COMPACT DESIGN — The compact design allows for installation in tight fit areas. The lid stay allows the lid to open at a maximum 105 degree angle. Perfect for any lids or flaps when lid support soft close is required..
  • EASY TO INSTALL — The safety hinges can be mounted on the left or right side, also used for side-mounting and top-mounting. Keep the soft close hinges installed for 75°-105° adjustable opening angles, depending on actual situation. It can fit for most lids.
  • REFUND GUARANTEE — If you are not satisfied w....
Check Stock