Top Lighting Coil

Maxxima 2 Head Outdoor LED Security Light, 20W, 1700 Lumens, Motion Sensor, Photocell Sensor, White, 5000K

  • Medium Base, 100 Watts, 130 Volts, BR38 Flood for Indoor or Outdoor Lighting Use.
  • Yellow Colored Floodlight Bulb 10,000 Hour Rated Incandescent.
  • Lasts 10 Times Longer Than Standard Bulbs With Reflector Disc To Minimize Heat.
  • 5 Filament Supports, Pure Tungsten Coil, Power Surge Resistant.
  • Ideal For Hard To Reach Areas, Landscape Lighting, Recessed Fixtures, Cold Weather Environments.
Check Stock

Electrodepot 60 Amp 4 Pole Normally Open Contactor 110-120V Coil Motor Load 40A Lighting 63A Bundle with Slotted Steel Zinc Plated DIN Rail 35 mm x 6 in – 1 Piece with 2#10 Screws

  • BUNDLE CONTENT: 4 ITEMS – One (1) 40A Contactor, one (1) compatible Slotted Steel Zinc Plated DIN Rail and two (2) drive stainless steel truss head....
  • APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp,....
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European....
Check Stock

Electrodepot 40 Amp 4 Pole Normally Closed Contactor, 110-120V Coil, Motor Load 20A, Lighting 40A Bundle with Slotted Steel Zinc Plated DIN Rail, 35 mm x 6 in – 1 Piece with 2 Number 10 Screws

  • BUNDLE CONTENT: 4 ITEMS – One (1) 40A Contactor, one (1) compatible Slotted Steel Zinc Plated DIN Rail and two (2) drive stainless steel truss head screws (#10, 1/2") for immediate installation.
  • APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 30VA, Sealed 4VA. Inductive/Motor Load: 20Amp, Resistive/Incandescent Load: 40Amp. DC Load: 30Amp @ 24VDC. Compatible with 20 Amp, 30 Amp, 32 Amp and 40 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NC with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 85 x 45 x 92 mm / 3.4'' x 1.7'' x 3.6'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 152.40mm (6”) and t....
Check Stock

SleekLighting - 23 Watt GU24 Base 2 Prong Light Bulbs- UL Approved CFL Light bulbs-120v 60Hz - Twist Lock Spiral -Self Ballasted CFL gu24 Light Bulb- 3500K- 1600s Neutral White 4 Pack (100 Watt Equ)

  • ...hese bulbs emit a warm white light. This rating means your lamp or ceiling fixture will emit a perfect amount of light that is not too dim and not too harsh. They're also fully adjustable meaning you can control the ambience of your room..
  • FROSTED FINISH: Unlike clear glass bulbs, frosted bulbs have a much different lighting effect for a unique mood. A clear glass globe emits light directly. A frost finish diffuses the light for a softer lighting effect. Ideal as a decorative alternative where high intensity light is not desired..
  • MULTIPLE USES: T2s are ideal for small compact spaces. Use anywhere where a low wattage bulb is required for warm, white, ambient light. The opaque coil bulb emits diffused lighting without using too much energy or power. Great for your next home improvement projects..
Check Stock

Electrodepot 40 Amp 12 Pole (4 Pole x 3) Normally Open, 110-120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with 8\ DIN Rail and 2 Number 10 Screws

  • BUNDLE CONTENT: 6 ITEMS – Three (3) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
  • one (1) compatible Slotted Steel Zinc Plated 35mm x 200mm DIN Rail and two (2) stainless steel truss head screws (#10, 1/2") for immediate home or industrial installation.
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specificat....
Check Stock

Electrodepot 40 Amp 8 Pole (4 Pole x 2) Normally Open, 110/120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with DIN Rail, 35 x 150 mm and 2#10 Screws

  • BUNDLE CONTENT: 5 ITEMS – Two (2) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
  • one (1) compatible Slotted Steel Zinc Plated 35mm x 150mm DIN Rail and two (2) stainless steel truss head screws (#10, 1/2") for immediate home or industrial installation.
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specificatio....
Check Stock

Ignition Coil Tester, Accurate And Reliable Hand‑Held Coil On Plug Fast Ignition Tester, Coil On Plug Tester, Professional Coil On Plug Quick Tester Diagnostic Tool for Home Laboratory

  • ...tion and engine problems and defects. This is a practical diagnostic tool for any engine with spark plugs..
  • EASY TO USE --- correctly connect the connector and sensor head to the tester, align the sensor head with the ignition coil and start working, and judge the working status of the ignition coil according to the lighting results. After receiving the signal, the tester will determine whether the COP is correct The amount of voltage and arc duration..
  • LIGHT INDICATION --- If the voltage is correct, the tester will beep and the red LED indicator will flash.
  • if the arc duration is correct, the green LED will also flash. Use the ignition coil tester to eliminate guesswork, and the test results are accurate and reliable..
  • WIDELY USED --- The handheld Coil On Plug rapid ignition tester is designed to easily and quickly determine whether the COP produces a suitable spark for the plug. Battery powered, stable and professional performance. It is a must-have for any individual, professional mechanical repair shop and auto shop..
  • WARRANTY AND SERVICE --- Customer satisfaction is our top priority. We provide you with 24-hour online customer service and a 180-day refund policy. If you have any dissatisfaction, you can unconditionally request a full refund. Click t....
Check Stock

Woods L6004WH L-6004Wh Twin Head Motion Activated Flood Light with Bulb Shield, 120 V, 240 W, Par, Incandescent, Watt, White

  • Medium Base, 100 Watts, 130 Volts, BR38 Flood for Indoor or Outdoor Lighting Use.
  • Blue Colored Floodlight Bulb 10,000 Hour Rated Incandescent.
  • Lasts 10 Times Longer Than Standard Bulbs With Reflector Disc To Minimize Heat.
  • 5 Filament Supports, Pure Tungsten Coil, Power Surge Resistant.
  • Ideal For Hard To Reach Areas, Landscape Lighting, Recessed Fixtures, Cold Weather Environments.
Check Stock

Vastarry 10 Cm Solid State Music Tesla Coil Artificial Lightning Desktop Toy Electric Power Wireless Transmission Model Science Experiment Tool

  • ...urned to medium power, you can touch the lightning with your hand, you will feel a little tingling, and you will appear extra powerful in front of your friends. At the same time, it is the perfect teaching tool to stimulate students' interest in science, and can be used as wireless power transmission, wireless lighting, etc..
  • The product has 2 knobs, one to adjust the frequency and one to adjust the power. Before using the power, you must adjust the 2 knobs to the minimum, otherwise, you will be frightened by the arc and the huge thunder after the power is turned on.When using maximum power, the thunder of the device is unavoidable, and sometimes yours will feel very harsh, so you can only adjust the power, or turn off the device to ensure that your environment is quiet.
  • The operation is convenient and simple, you only need to tighten the discharge needle, turn down the power, frequency, and plug in the power supply, you can see the lightning in front of your eyes, slowly increase the power, control the lightning arc to gradually become larger and thicker, and you can also connect Phone, switch to the music gear, let the lightning dance to the rhythm of the mus....
Check Stock

Veris,Current Switch,SolidCore,Fxd,N.O,250V, H800-HV

  • Hawkeye 800 go/no go current switches provide a cost-effective solution for monitoring status on unit vents, exhaust fans, recirculation pumps, and other fixed loads where belt loss is not a concern.
  • APPLICATIONS Monitoring on/off status of electrical loads Monitoring direct-drive units, exhaust fans, and other fixed loads Verifying lighting run times On/off status for direct-drive fans, pumps, and process motors More reliable for status than relays across auxiliary contacts Ideal for direct-drive units, unit vents, fan coil units, exhaust fans, and other fixed loads Great for lighting status less expensive than 277V relays Removable mounting bracket provides installation flexibility.
  • saves valuable panel space100% solid-state, no moving parts to failPolarity insensitive output5-year limited warranty.
Check Stock

Blaze XL900 Home Theatre Furniture - Black Premium Leather - USB Charging Port - Memory Foam - Accessory Dock - Lighted Cups - Power Recline - Straight Row 4 with Middle Loveseat

  • 100% TOP-GRAIN LEATHER: Quality you can feel. Cut from the best portion of the hide. Durable and soft to the touch..
  • PILLOW PERFECT COMFORT: Pocketed coil construction for lifetime no-sag seating. Kiln-dried hardwood frame..
  • BUILT-IN USB PORT: Power up while you power down. Equipped with a USB port, now you can charge up your devices while enjoying the show..
  • BLUE AMBIENT LED LIGHTS: Set the mood. LED lighting in the cup holders and under the chair make your movie night simply perfect..
Check Stock

JBL MT8HLB 8' 2-Way Marine Tower Speaker with 1' Tweeter – Black & Kicker 41KMLC RGB LED Lighting Controller

  • Includes Kicker LED Light Controller for KM Coax and Sub 41KMLC and JBL MT8HLBAM / MT8HLB 8" Marine Compression Horn Tower Speakers With RGB LED Lighting.
  • 41KMLC - Multi-Function Control of LED Lighting for a Customized Look.
  • 41KMLC - Compatible with Kicker Marine Coaxial Speakers and Subwoofers.
  • MT8HLBAM - 1" Titanium Compression Horn Tweeter - Gets the sound out so you can enjoy it behind the boat!.
  • MT8HLBAM - 1.5" High Temperature Voice Coil.
Check Stock