Top Lightweight Aluminum Enclosure

Retro-Sonic Blues Train

  • Features: MJME8D1 Dual Mini Mojo 8″ Loaded Enclosure, Piano black gloss finished front panel, Carpet wrapped enclosure, 4-layer wound copper voice coil, Fiberglass reinforced subwoofer cone, Stitched foam surround, Heat dissipating aluminum heat sink, DVVC Direct Vent Voice Coil Cooling, Ported Enclosure, All Mojo Mini Enclosures are @ 1Ω.
  • Specifications: RMS: 1800W, PEAK: 3200W, Dimensions: (W) 33.5″ (H) 14.6″ (TOP D) 15.25″ (BOTTOM D) 17.75″​.
Check Stock

USB C 3.2 Gen2 MacBook SSD Enclosure for Apple Flash SSDs 12+16 PIN MacBook Pro MacBook Air Mac Pro iMac from 2013 to 2017, with Adapter to Support M.2 NVMe SSDs (PCIe NVME/PCIe AHCI Protocol)

  • [Upgraded MacBook SSD Enclosure] The USB C 3.2 SSD enclosure works well for all Apple original Mac SSDs with 12+16 Pins. Compatible with Toshiba and OWC brand SSDs. Also support M.2 NVMe SSDs with an enclosure interface adapter..
  • [2022 Latest High Speed Chip] Support PCIe NVMe protocol / PCIe AHCI protocol SSD, better work efficiency and more secure data protection. USB 3.2 Gen 2 Macbook air ssd enclosure is compatible for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro. Compatible with Windows, Mac OS, Linux, iOS..
  • [Faster Data Transmission] Macbook pro ssd enclosure with USB 3.2 Gen2 interface, the transmission speed is 10Gbps(USB-C to USB-A). It can also reach 20Gbps transmission speed with USB 3.2 Gen2x2.(USB-C to USB-C). Downward compatibility with USB 3.1 gen2, USB 3.0, USB 2.0. It only takes a few seconds to save and transfer files..
  • [SSD Installation Steps] Unscrew the four fixing screws on the cover with a screwdriver and remove the cover from the ssd enclosure. Align the ssd with the card slot on the ssd base and gently push it in. Tighten the screws with a screwdriver to fix the ssd on the ssd base. Tighten the 4 fixing screws on the cover with a screwdriver, and the installation of the ssd is completed. ❤N....
Check Stock

Dayton Audio 10\ Reference Series HO DVC Subwoofer and Starter Enclosure Package

  • Lightweight black anodized aluminum cone for rigidity and lower moving mass.
  • 1-1/2" thick front baffle for a solid surface to mount the driver.
  • Triple shorting ring motor for ultra-low distortion.
  • Extensive bracing design ties all sides together for an extremely rigid enclosure.
Check Stock

UGREEN USB C Hard Drive Enclosure for 2.5\ SATA SSD HDD Aluminum USB C to SATA Adapter USB 3.1 Gen 2 Support UASP SATA III Compatible with MacBook Pro Air WD Seagate Toshiba Samsung Hitachi

  • 【USB C Hard Drive Enclosure】UGREEN hard drive enclosure can easily connect a 2.5" SATA SSD or HDD with your computer to expand storage, upgrade the system, back up files, retrieve and recover data, and transfer data. This external hard drive enclosure protects the external hard drive from outside scratches and makes the hard drive portable for data storage..
  • 【6Gbps High-Speed SSD Enclosure】UGREEN hard drive reader supports 6Gbps max transfer speed and UASP accelerated transmission protocol, 70% Faster than traditional USB 3.0. The USB-C port is standard USB 3.1 Gen 2 which supports 10Gbps and (7+15)Pin SATA III supports max 6Gbps. 【USB-C to USB-C Cable included】.
  • 【Aluminum 2.5" Hard Drive Enclosure】Made of premium aluminum alloy, durable and excellent heat dissipation, no cooling fan is needed for your high-speed working, portable and easy to carry with. The LED indicator lets you know the working status easily. The Auto Sleep Mode helps to extend the lifespan of your hard drives..
  • 【Easy Installation HDD Enclosure】Plug and play with tool-free installation, no driver is needed for this external hard drive case. Supports Windows/Mac OS/Linux systems, game consoles like Sony PS4/PS3/Xbox One, Smart TV, Router, etc. 【For the devices on....
Check Stock

Infinity Basslink Mini - Powered 6x8 underseat subwoofer - Titanium

  • 6" x 8" Underseat Subwoofer with 100W Amplifier.
  • Big Bass, Small Space - Infinity BassLink MINI delivers deep bass and takes up minimal space..
  • Intelligent Electronic Design for Reliable and Extraordinary Performance- The BassLink MINI employs high-pass filters and limiters that deliver....
  • Die-Casting Aluminum Enclosure Design- The all-die-cast aluminum enclosure design not only minimizes size but also eliminates rattles.
  • Bass Volume Remote Control- Bass Volume Remote control is included to let you adjust the sound from the driver’s seat..
Check Stock

SainSmart Large 3D Printer Enclosure, 20.9'' x 24.2\ x 28.9\

  • Consistent Temperature: The SainSmart 3D Printer Enclosure reduces heat losses and prevents external factors that might alter your prints, keeping the printing area at a consistent temperature, delivering stable and smooth printing results..
  • Noise & Dust Reduction: A enclosure helps to reduce the annoying fan noise while printing, making it more viable for home and school use. It also protects your printers from dust..
  • Safe to Use: The lining of enclosure uses pure aluminum film material, equipped with stainless steel supports, stable structure and a large space. Folding storage, easy to install and carry..
  • Better organize your printing area: the enclosure is equipped with multiple tool pockets and holders on each side, keeping your printing area clean and tidy..
  • With a large area measuring 73.5cm x 61.5cm x 53cm (20.9'' x 24.2" x 28.9"), this enclosure is compatible with Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 V2 Neo, Ender-3 S1 Pro, Ender-3 Max, Ender-3 Max Neo, Ender-5 Pro, CR-6 SE, CR-10, CR-10 Smart Pro..
Check Stock

ORICO 4 Bay HDD Raid Enclosure USB External Hard Drive Enclosure Aluminum Magnetic SATA III Disk Storage Case Tool-Free for 2.5/3.5 SSD HDD Support 64TB(4X16TB) for Data Backup NAS Expansion NS400RU3

  • 【4 Bay Raid External Enclosure】-- The 4 bay hdd enclosure can support about 7 kinds of raid modes, you can use the raid function to combine your hard drive or improve your data transmission rate. More raid modes the 4 bay enclosure supports, more convenient in your daily work and life..
  • 【64TB Large Capacity Enclosure】-- The 4 bay sata enclosure can fits 3.5inch and 2.5inch with a bracket SATA SSD and HDD, and each slot can support up to 16TB hard disk, altogether 64TB, good for data storage and nas expansion for enterprises, self-media workers and who works with much data transfer. You can also use it to store large games, work materil, your family memories and backup of camera video..
  • 【Faster Enclosure, 1GB Files for 3 Seconds】-- By adopting high quality chip controller, the drive bay enclosure supports SATA III protocol, the data transfer rate can reach up to 5Gbps(MAX), it can backward compatible with USB2.0/1.0, very stability and easy to carry the huge data interaction of enterprise, reduce the delay..
  • 【Fast Cooling Hard Disk Enclosure】-- The drive bay enclosure is make by 4mm thickness aluminum board body and magnetic enclosure door. There's a cooling fan which the diameter is 92mm built in the usb drive bay enclosure, with a honey....
Check Stock

M.2 NVME SATA SSD Enclosure Adapter Tool-Free RTL9210B Chips USB C 3.1 Gen 2 10Gbps NVME 6Gbps SATA PCIe M-Key B+M Key Support UASP Trim for SSD Size 2242/2260/2280

  • 【Chipset RTL9210B M.2 NVMe SATA Enclosure】M.2 Enclosure Up to 10 Gbps High speed M.2 NVME to USB 3.1 Gen 2, 6Gbps speed M.2 SATA to USB 3.1 Gen 1,....
  • 【TOOL-FREE DESIGN】Tool-free NVMe SATA NGFF enclosure allows quick and easy installation of your M.2 NMVe SSDs or M.2 SATA SSDs. The first time you....
  • 【COMPATIBILITY】Compatible with M.2 NVMe/SATA PCIe M key,PCIe B&M key SSD. Note: NVMe and SATA SSD are not included. NOT Compatible with M.2 PCIe....
  • 【Support System】NVME SATA Enclosure Compatible Multi OS, Windows, Mac OS,Linux ,Android. Support UASP / Trim with ultra fast transmission speed.....
  • 【Aluminum Thermal Design】M.2 adapter adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, reduced power consumption.....
Check Stock

M.2 NVME NGFF SSD Enclosure Adapter Tool-Free RTL9210B Chips USB C 3.1 Gen 2 10Gbps NVME 6Gbps SATA PCIe M-Key B+M Key Support UASP Trim for SSD Size 2230/2242/2260/2280

  • 【Chipset RTL9210B M.2 NVMe SATA Enclosure】M.2 Enclosure Up to 10 Gbps High speed M.2 NVME to USB 3.1 Gen 2, 6Gbps speed M.2 SATA to USB 3.1 Gen 1,....
  • 【TOOL-FREE DESIGN】Tool-free NVMe SATA NGFF enclosure allows quick and easy installation of your M.2 NMVe SSDs or M.2 SATA SSDs. The first time you....
  • 【COMPATIBILITY】Compatible with M.2 NVMe/SATA PCIe M key,PCIe B&M key SSD. Note: NVMe and SATA SSD are not included. NOT Compatible with M.2 PCIe....
  • 【Support System】NVME SATA Enclosure Compatible Multi OS, Windows, Mac OS,Linux ,Android. Support UASP / Trim with ultra fast transmission speed.....
  • 【Aluminum Thermal Design】M.2 adapter adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, reduced power consumption.....
Check Stock

DreamLine Prime 33 in. x 74 3/4 in. Semi-Frameless Frosted Glass Sliding Shower Enclosure in Chrome with White Base Kit, DL-6701-01FR

  • Kit includes: Prime Shower Enclosure and SlimLine Shower Base.
  • Kit Size: 33 in. x 33 in. x 74 3/4 in. H.
  • Prime Shower Enclosure: Center opening dual sliding door design.
  • Full length magnetic strip for watertight closure.
  • Quality 1/4 in. (6mm) certified tempered glass.
  • Anodized aluminum wall profiles allow 1 in. adjustment per side.
  • SlimLine Shower Base: Curved neo round design for corner installation.
  • Kit includes: Prime shower enclosure, SlimLine shower base, Prime shower enclosure. Perfect for smaller spaces where a swing door will not work.
  • Full length magnetic strip for watertight closure. 31 3/8 in. D x 31 3/8 in. W x 72 in. H.
  • 1/4 in. (6mm) thick ANSI certified frosted tempered glass. Anodized aluminum wall profiles allow up to 1 in. adjustment per side. Finish: Chrome.
  • Shower Base 33 in. D x 33 in. W x 2.75 in. H.
  • Curved neo round design. Scratch/stain resistant acrylic. Slip-resistant texture. Integrated tile flange.
  • Reinforced with fiberglass for durability. cUPC certified. Drain not included. Professional installation required. Limited Lifetime Warranty.
Check Stock

DreamLine Prime 38 in. x 74 3/4 in. Semi-Frameless Frosted Glass Sliding Shower Enclosure in Chrome with White Base Kit, DL-6703-01FR

  • Kit includes: Prime Shower Enclosure and SlimLine Shower Base.
  • Kit Size: 38 in. x 38 in. x 74 3/4 in. H.
  • Prime Shower Enclosure: Center opening dual sliding door design.
  • Full length magnetic strip for watertight closure.
  • Quality 1/4 in. (6mm) certified tempered glass.
  • Anodized aluminum wall profiles allow 1 in. adjustment per side.
  • SlimLine Shower Base: Curved neo round design for corner installation.
  • Kit includes: Prime shower enclosure, SlimLine shower base, Prime shower enclosure. Perfect for smaller spaces where a swing door will not work.
  • Full length magnetic strip for watertight closure. 36 3/8 in. D x 36 3/8 in. W x 72 in. H.
  • 1/4 in. (6mm) thick ANSI certified frosted tempered glass. Anodized aluminum wall profiles allow up to 1 in. adjustment per side. Finish: Chrome.
  • Shower Base 38 in. D x 38 in. W x 2.75 in. H.
  • Curved neo round design. Scratch/stain resistant acrylic. Slip-resistant texture. Integrated tile flange.
  • Reinforced with fiberglass for durability. cUPC certified. Drain not included. Professional installation required. Limited Lifetime Warranty.
Check Stock

DreamLine Prime 36 in. x 74 3/4 in. Semi-Frameless Frosted Glass Sliding Shower Enclosure in Chrome with White Base Kit, DL-6702-01FR

  • Kit includes: Prime Shower Enclosure and SlimLine Shower Base.
  • Kit Size: 36 in. x 36 in. x 74 3/4 in. H.
  • Prime Shower Enclosure: Center opening dual sliding door design.
  • Full length magnetic strip for watertight closure.
  • Quality 1/4 in. (6mm) certified tempered glass.
  • Anodized aluminum wall profiles allow 1 in. adjustment per side.
  • SlimLine Shower Base: Curved neo round design for corner installation.
  • Kit includes: Prime shower enclosure, SlimLine shower base, Prime shower enclosure. Perfect for smaller spaces where a swing door will not work.
  • Full length magnetic strip for watertight closure. 34 3/8 in. D x 34 3/8 in. W x 72 in. H.
  • 1/4 in. (6mm) thick ANSI certified frosted tempered glass. Anodized aluminum wall profiles allow up to 1 in. adjustment per side. Finish: Chrome.
  • Shower Base 36 in. D x 36 in. W x 2.75 in. H.
  • Curved neo round design. Scratch/stain resistant acrylic. Slip-resistant texture. Integrated tile flange.
  • Reinforced with fiberglass for durability. cUPC certified. Drain not included. Professional installation required. Limited Lifetime Warranty.
Check Stock