Top Lightweight Electrode Clamp

Lincoln TIG Kit for Power MIG 210MP K3690-1

• 3 Year Warranty, 100 Day, 100% Satisfaction Guarantee.
• ESAB EMP 210 is a Multi-Process MIG/Flux Cored/Stick/Lift TIG welding system with a 10-200A output. Stable Lift TIG arc at low amperage for total control.
• power to run stick electrodes up to 5/32 in. Digital controls with large easy-to-read LED display enable fast, easy and more accurate operation.
• Package includes a Tweco Fusion 180 MIG gun with Velocity consumables, Victor Argon/CO2 regulator, Tweco ground clamp with heavy duty 50 mm Dinse connection, 50A-15A (120/230V) power adapter, sample wire spool of ESAB OK AristoRod 12.50 mild steel wire (2#) and 0.024/0.030 and 0.030/0.035 drive rolls., 17v Tig Torch and Electrode holder.
• Spool Gun Ready to MIG Aluminum with optional Spool Gun.

KSEIBI 331215 300 Amp Welding Electrode Holder American Design

• This Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
• Large 300-Amp provides durability, up to 5/32" inch electrode capacity..
• Lightweight and easy to operate with newly designed level for good hand clearance and better hold..
• The high temperature / high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
• Use KSEIBI electrode holder to connect to the welding cable and con-duct the welding current to the electrode..

Lincoln Electric Inverter ARC 120 K2789-2

• Century DC Inverter stick welder 70 Amp welds up to 1/4 in. This 17 lbs. welder has 120-Volt input. One-year warranty parts and labor. 20% Duty cycle..
• 6 ft. input cable with attached 15 Amp plug.

Hobart 500570 Stickmate 160i

• Easy to carry & store. Weighs under 20 lbs.
• 10 ft. (3 m) electrode cable with heavy- duty holder.
• Easy, quick, reliable starts with hot start technology.
• Up to 160A output. Welds up to 5/32 inch mild steel.
• 120V/240V input power. Allows connection to 120 or 240V receptacles without tools.

SUNGOLDPOWER ARC MMA 200A Welder Dual 110V 220V IGBT Hot Start Welding Machine DC Inverter Welder 200 AMP LCD Anti-Stick

• Please Note: some cheaper welders are only about 7-10lbs, looks like a toy.
• however, SUNGOLDPOWER welder is heavier than others, because SUNGOLDPOWER welder is full-bridge welder (many cheap welders are half bridge welder), we use more high quality components to support its perfect working and long-life time..
• 2.Advanced control module IGBT dual 110V and 220V, improves the performance of the welding machine. IGBT MMA welder adopting advanced full bridge IGBT inverter technology.
• 3. Anti-sticking preventing against over loading the unit easing removal of the electrode,thermostatic control,fan cooled carrying strap and handle..
• 4. Hot start, arc force overload protection：over-voltage protection, under voltage protection, over current protection, over load protection.
• 5. Supplied complete with AC Plug，electrode holder and cable, earth clamp and cable, Complete package..

OhLectric OL-38707 High-Conductivity Ground Pipe Clamp - Made of Copper Alloy - Connecting Grounding Electrodes to Water Pipes Clamp - Non-Direct Burial Pipe Clamp - ½ Inch - 1 inch Pipe Range

• ...round clamps are extremely durable with high strength and are built to last for a lifetime. Our pipe clamps are designed to fit and organize in a safe manner with the maximum flexibility to suit your needs!.
• MULTIPURPOSE: These pipe ground clamps are an excellent choice for either clamping the pipes to the grounding electrode or you can even use these clamps to securely mount the pipes on walls. It can also be used for connecting bare wires to pipes or steel water pipe or tubing..
• CORROSION FREE: The ground clamp for pipe can be attached to the grounding electrode and the pipe by the means of indirect burial with the screws provided. To prevent rusting, the screws are coated with zinc plated steel alloys which totally eliminates the chances of corrosion on the clamps..
• SAFETY TESTED: All our products are certified by Culus for their safety and specification standards set by them. We follow every step to ensure all the housing rules and regulations are followed as we value customer satisfaction and safety more than anything else..
• ADAPTABLE FIT: These pipe grounding clamps come in a variety of sizes which are well equipped for all wire ranges between 2-10. And also they support all pipe sizes from the smallest ½ inch to 1 inch. The screw thread on the cl....

Stick Electrode, 1/8 in. dia., 10 lb.

• 200 AMP Electrode Holder – The comfortable, lightweight electrode holder is rated for 200 amps of current at a 20% duty cycle..
• 12.5 FT Cable Length - The assembly features a flexible copper welding cable which is 12.5 FT in length..
• Twist-Mate / Dinse Connector – The assembly features twist-mate / dinse connector is which is compatible with the Power MIG / Weld-Pak 140, Power MIG 180, Power MIG 210mp, SquareWave TIG 200 and many other Lincoln or competitor power sources..
• TRUSTED BY PROFESSIONALS – This electrode holder assembly is used by professional fabricators on a daily basis..
• For use with 3/32, 1/8 or 5/32 Stick (SMAW) electrodes..

ABN Pneumatic Spark Plug Cleaner – Spark Plug Sandblaster Plug Cleaner Tool with Abrasive Universal Sparkplug Cleaner

• PROLONG THE LIFE OF YOUR SPARK PLUGS: Are your spark plugs underperforming? Clean them up with the ABN Spark Plug Cleaner Pneumatic Sand Blaster....
• SPARKPLUG SANDBLASTER CLEANER KIT: Includes a spark plug cleaner unit, a fabric spark plug cleaner bag, an airbag clamp, a 1.7 oz (.1lb) bag of....
• BUILT TO LAST: Constructed of a thick, durable plastic base with brass fittings, and a steel clamp provides this air spark plug cleaner sandblaster....
• SIMPLE INSTALLATION AND SET UP: 2 mounting flanges on each side allow you to mount the spark plug cleaner machine vertically on a wall or post.
• EASY TO USE: Hook your compressor to the spark plug tool cleaner and insert the spark plug (electrode-side down) into the rubber cover at the top of....

AccuRelief Wireless TENS Unit with Remote Control, TENS Pain Relief Device and Muscle Stimulator, for Back Pain, Neck Pain, Arm and Leg Pain

• ...as stimulate nerve endings in order to block pain receptacles..
• Pre-programmed with three phases of alternating therapy for quick, safe and effective relief, it’s incredibly powerful with 20 levels of adjustable intensity increase or decrease stimulation with remote control, 30 minute treatment with auto shut-off..
• Lightweight, flexible design of each unit shapes and contours to almost any body part, and the electrode gel pads are small and compact to wear discreetly under clothing. The Dual Channel electrode system lets you treat back pain, neck pain, shoulder pain, etc with one pad or two, as needed..
• OTC approved. TENS equipment is now approved for electrotherapy. Most people find pain relief using TENS for issues such as back pain, neck pain, carpal tunnel, and diabetic foot pain..

2021 LightningMTS 275 AC/DC TIG with Pulse/MIG/Stick Welder Dual Voltage 110v/220v

• 12 ft. Everlast 18 Series Water Cooled TIG torch with series 35 DINSE-style connector.
• 10 ft. Series 36 MIG torch with Euro style quick connect fitting.
• Stick electrode holder with 10 ft. cable and 35 series DINSE-style connector.
• Work clamp with cable 10 ft. cable and 35 series DINSE-style connector.
• Spare consumable starter kit (does not include tungsten).

Hobart 770655 Cup, Swirl Ring, O-Ring Kit for the AirForce 700i

• Easy to carry & store. Weighs under 20 lbs.
• 10 ft. (3 m) electrode cable with heavy- duty holder.
• 6.5 ft. (2 m) power cord with MVP adapters for 120V and 240V ..
• Easy, quick, reliable starts with hot start technology.
• Up to 160A output. Welds up to 5/32 inch mild steel.
• 120V/240V input power. Allows connection to 120 or 240V receptacles without tools.

Welding Lead Package 100 - 1/0 Cable Electrode Holder Ground Clamp Lugs Set 1-A316 1-GC300 2-2AF 1set- 2MPC1 100ft-1/0