Top Limit Switches Dpdt

weideer Momentary Rocker Switch 12V Reverse Polarity with Red LED ON/Off/ON 6 Pin DPDT Waterproof Automatic Reset Boat Motor Control RV Jack Switch with Jumper Wires KCD4-223-JT-W-X-R

  • Rocker Switches house a button for operation that can be pressed on either end like a seesaw to connect or disconnect an electrical circuit. They are often used as ON/OFF switches on the main power supplies for electronic devices. A maintain switch changes its position when actuated and will remain in the position until actuated again. Stays / Maintains / Latched / Lock/ Locked/ Locking in position placed..
  • 15 amps at 250 VAC and 20 Amps At 125 VAC or 20 Amps At 12 V DC and 10 Amps at 24 Volt DC. Also make sure you are using a switch and wires sufficient to handle the power that you are carrying. In higher draw applications, a relay may be needed. Always use a fast blow fuse of rated amperage. Use terminals of good enough grade to handle the amperage in switch to avoid heat and damage..
  • 8 inch wires With 1/4" female connectors attached. Hole size is 7/8" X 1-1/16" 22mm X 27mm. 6 Pin prong Terminal. Can be used as a forward reverse switch..
  • Light weight construction.Double Throw Double Pole Two Position. DPDT is equivalent to two SPDT switches. It routes two separate circuits, connecting each of two inputs to one of two outputs. The position of the switch determines the number of ways in which each of the two contacts can be routed. They can connect two ....
Check Stock

Genie 36179R.s & GLU lube and Carriage Kit OEM Garage Door Opener Replacement Part, Screw Drive Assembly, Black

  • SCREW DRIVE CARRIAGE 36179R.S & LUBRICANT: Works for older style Genie screw drive garage door openers manufactured from 1993 to 2011 (older style rail assembly).
  • REPLACEMENT PART FOR: Replaces PART NUMBERS 20414R 34104R 36179R.S 25589S 34107.S 20414R 34104R 34107R.
  • LUBRICANT INCLUDED: When replacing the 36179R.s screw drive carriage, lubricant should be applied - this is included within this kit.
  • MAGNETIC OR MECHANICAL LIMIT SWITCHES: Works with magnetic or mechanical style limit switches older style Genie screw drive garage door openers.
  • GENUINE GENIE REPLACEMENT PART: OEM Part ensures quality, reliable product replacement.
Check Stock

Twidec/6Pcs Mini Momentary Toggle Switch DPDT 3 Position 6 Pins (0N)-Off-(ON) Miniature Toggle Switch AC 5A/125V 2A/250V Car Boat Switches with Waterproof Cap MTS-223-MZ

  • Special note: This Toggle switch is a momentary switch.Product Name: Toggle switch.
  • Rated Voltage & Current : AC 5A/125V 2A/250V.
  • Overall size:13mm x 11.5mm x 32mm/0.5"x0.45"x1.2"(L*W*T).
  • Easy to install which features mini body and it's widely used to control operation of many small power electronic projects..
  • Package content: 6 x mini Toggle switches + 6 x Waterproof Cap(Each switch comes with two hex nuts, a flat and a locking washer).
Check Stock

WMYCONGCONG 10 PCS Endstop Mechanical Limit Switch with Cable for 3D Printer Mega 2560

  • Mechanical endstop limit switches with 22AWG Cable for 3D Printer Mega 2560 1280..
  • Red line connecting VCC (ramps of +), Connect the black wire GND (ramps of -), Green Line connection SIGNAL (ramps in s).
  • Easy to install, common styles, replacement endstop for RAMPS 1.4, CNC and other 3D printer controllers..
  • Package Content: 10 * Mechanical Endstop Limit Switch with Cable..
Check Stock

3D Printer Part End Stop Limit Switch，5 Pcs Micro Mechanical Switch 3 Pin Compatible with CNC RAMPS 1.4 RepRap 3D Printer CR-10 10S,S4,S5,Ender 3/Ender 3 Pro/Ender 3 V2 by GUBCUB

  • Compatible with all Creality 3D Printer:The Micro Switch is For Ender-3/Ender-3 S/Ender-3 Pro/Ender-3 V2/Ender-3 Max/CR-10/CR-10 V3/CR-10 S4 and....
  • Easy to install:Normally 3Pin N/O N/C control mechanical limit switch for 3D Printer, Small and compact size, easy installation, just plug and play.
  • Features: Our switch terminals are fire-retardant and special technology. Rated load: AC 250V 1A.
  • Package included: 5 pcs Micro Limit Switches. Generally, the printer DIY system needs at least three optical switches..
  • After-sales service: We are responsible for each product. If the product you receive is defective or cannot be used normally, please contact us, and....
Check Stock

TWTADE 3 Pcs Momentary Heavy Duty Rocker Toggle Switch 6 Pin 3 Position ON -Off- ON DPDT 16A 250VAC Spade Terminal Metal Bat Switch with Waterproof Boat Cap and 6.3mm Terminal Wires TEN-223MZX-B223

  • Special attention:This Toggle switch is momentary；Material: Plastic And Metal；Solid connection switch with waterproof rubber cap, more convenient....
  • Connector type:DPDT 6 Pin 3 Position (ON)-OFF-(ON) ；Rated Voltage & Current :16(10)A 250V AC；The waterproof rubber cover can prevent all toggle....
  • Toggle Switch Total Size:59mm x 32.7mm x 19.5mm/2.3"x1.28"x0.77"（L*W*H).
  • Mounting hole diameter: φ12mm；Spade Terminal Diameter：6.4mm.
  • Toggle switches have connecting wires and are easy to install.Mechanical life: more than 50.000 cycles. Electrical life: more than 10, 000 cycles..
  • Package Content: 3 x Rocker Toggle Switch+ 3 x Waterproof Boot Cap + 6 x Connection line.
Check Stock

WindyNation Linear Actuator or DC Motor Power Supply + DPDT Wireless Remote Control Switch + Double Adapter Cable

  • Includes Power Supply, Remote Control Unit, Double Adapter Cable (for connecting two linear actuators or DC motors), and additional Connection Cables.
  • Can wirelessly control two 12 volt DC Motors or two linear actuators (5 amps maximum). The remote control is a DPDT switch (Examples: Up-Stop-Down or....
  • Power Supply Specs: AC INPUT RANGE: 100-240 VAC DC OUTOUT: 12 VDC (5 amps maximum) ADDITIONAL INFO: 8ft AC extension cord included and 5ft DC....
  • Remote Specs: POWER RATING: 5 amps REMOTE RANGE: 90ft maximum FREQUENCY: 433.92 Mhz OPERATING CURRENT: 15mA SWITCH TYPE: DPDT ON-OFF-ON.
  • Simple Installation: The included connectors allow for a quick and simple installation of the power supply and remote receiver..
Check Stock

Gardner Bender GSW-50 Electrical Square Rocker Switch, SPST, ON-OFF, 16 A/125V AC, Spade Terminal, Red Illumination

  • ...ations such as lift, hoist, winch, door, or window resets automatically (returns to center off position) when released. Forward Reverse Switch..
  • Double Pole Double Throw, DPDT, 2PDT, DP2T, 2P2T, Dual Position, dual throw. This type of switch can be a little confusing. It might be easier to consider it to be two SPDT switches in one. They connect two different power sources to two different loads or accessories at the same time. It routes two separate circuits, connecting each of two inputs to one of two outputs. The position of the switch determines the number of ways in which each of the two contacts can be routed..
  • Our Heavy Duty rocker switches are used in Car, Car Accessories, Race Car, Racing Needs, Truck, Boat, Airplane, Aviation, Motorcycle, ATV, UTV, RV, Camper, Trailer, Automotive, Marine, Industrial, Winch, Actuator, Liftgate, fifth wheel jack, Manufacturing, Bilge Pump, Auxiliary Cooling Fan, Solar, Light Bars, Sounds Systems, MRO Maintenance Repair, Appliances, Outdoor Lights, Dash Lights, headlights, Dome Lights, Engineering, Off Road, Design, Robotics, Automation, Tilt, Trim, DIY, Etc..
Check Stock

Genie Garage Door Openers 24701R Chain Drive Limit Dogs

  • Direct replacement for older model Genie Chain Drive door openers w/steel T-Rail assembly..
Check Stock

DEWALT 68,000 BTU Hybrid Portable For

  • Hybrid power operates with 20 Volt MAX battery or 120 Volt power supply.
  • Quiet Burner Technology - 50% less noise than standard units of similar size.
  • Equipped with factory-installed high-limit switches and a thermoelectric safety valve.
  • Includes factory-matched 10 ft hose and regulator.
Check Stock

OEM Upgraded Replacement for Amana Furnace Control Circuit Board 50A55-288

  • Low cost form, fit and functional replacement board for Lennox BCC1, BCC2 and BCC3 circuit boards.
  • Controls inducer fan motor, blower fan and monitors limit switches.
Check Stock

LevelGuard Z24800A1Z Solid State Sump Pump Switch

  • Solid-state electronic design for non-sewage applications.
  • Redundant upper limit sensors for “fail-safe” reliability.
  • Outlasts competitor float switches 7 to 1 and highly resistant to contaminant and mineral build up.
  • 9ft SJTOW/14 gauge cord with "piggy-back" plug.
  • LevelGuard products are warranted for five (5) years.
Check Stock