Top Line Impedance Stabilisation Network

Hosa DIB-443 1/4\ TS to XLR3M Sidekick Passive DI Box

  • Use the Sidekick to “go direct” for a pure, clean, noise-free tone that is perfect for digital signal Processing (DSP) or throw the INST/line switch to line position to allow your amp to drive the line for a natural, overdriven tone.
  • The Sidekick passive DI box by hosa technology makes it easy to connect your guitar, bass, or keyboard directly to a mixing console.
  • Any Electronic musical instrument with a mono phone output.
  • Passive Direct Box For Guitar And Bass High-Quality Isolation Transformer To Change High Impedance.
  • Into A Low Impedance Output For Sending Long Distances Via Balanced Microphone Cable Or Stage.
  • Snake Imparts A Slight Gain To The Signal Hi-Z Output For Sending To On-Stage Amp Ground Lift.
Check Stock

JBL Commercial 70v Amp+12 White 5\ Ceiling Speakers for Restaurant/Bar/Cafe

  • ... (12) RockvilIe CCL5T White 70V 5" Commercial Ceiling Speakers 4 Restaurant/Office. Features: JBI VMA160 60 Watt 70V Mixer/Amplifier with Bluetooth and 5 Channel Inputs. Max Output Power: 60 Watts. Frequency Response: 20 Hz - 20 kHz. THD (Total Harmonic Distortion): 003c0.5%. Signal-to-Noise Ratio: 003e 76 dB.
  • Input Impedance: Mic: 400 Ohms Line: 20 kOhms (balanced) RCA: 50 kOhms. Phantom Power: 27VDC. Crosstalk: -70 dB. Nominal AC Line Voltages: 100V, 120V, 220V, 220-240V, 50/60 Hz. Minimum Load Impedance: 4 Ohms, 80 Ohms,160 Ohms. Insertion Loss: 1 dB Maximum. Number of Inputs: 5. Number of Outputs: 1. Tone Control: Bass +/-14dB @ 50Hz.
  • Input Sensitivity: Mic Input: 5.5mVRMS Line Input: 1.3VRMS RCA Input (stereo in): 130mVRMS. Independent bass and treble controls for each output channel. Paging Chime, and Priority Muting. Rack mounting hardware included. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches. Product Weight: 19.4 Lbs. 70V Power Options: 5w (White). 2.5w (Green). 1.25w (Red). Features:.
  • (12) RockvilIe CCL5T White 70V 5" Commercial Ceiling Speakers. Perfect for PA announcements or background music or any other applications where you want many speakers installed. Transformer with terminals for 5 Watts, 2.5 ....
Check Stock

JBL Commercial 70v Amp+(8) White 5\ Ceiling Speakers for Restaurant/Bar/Cafe

  • .... (8) RockvilIe CCL5T White 70V 5" Commercial Ceiling Speakers 4 Restaurant/Office. Features: JBI VMA160 60 Watt 70V Mixer/Amplifier with Bluetooth and 5 Channel Inputs. Max Output Power: 60 Watts. Frequency Response: 20 Hz - 20 kHz. THD (Total Harmonic Distortion): 003c0.5%. Signal-to-Noise Ratio: 003e 76 dB.
  • Input Impedance: Mic: 400 Ohms Line: 20 kOhms (balanced) RCA: 50 kOhms. Phantom Power: 27VDC. Crosstalk: -70 dB. Nominal AC Line Voltages: 100V, 120V, 220V, 220-240V, 50/60 Hz. Minimum Load Impedance: 4 Ohms, 80 Ohms,160 Ohms. Insertion Loss: 1 dB Maximum. Number of Inputs: 5. Number of Outputs: 1. Tone Control: Bass +/-14dB @ 50Hz.
  • Input Sensitivity: Mic Input: 5.5mVRMS Line Input: 1.3VRMS RCA Input (stereo in): 130mVRMS. Independent bass and treble controls for each output channel. Paging Chime, and Priority Muting. Rack mounting hardware included. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches. Product Weight: 19.4 Lbs. 70V Power Options: 5w (White). 2.5w (Green). 1.25w (Red). Features:.
  • (8) RockvilIe CCL5T White 70V 5" Commercial Ceiling Speakers. Perfect for PA announcements or background music or any other applications where you want many speakers installed. Transformer with terminals for 5 Watts, 2.5 w....
Check Stock

Rockville Apm10b 10' 400W Powered/Active Studio Subwoofer Pro Reference Sub

  • ...-Free Playback Even at Max Volume Listening! Very Clean Sound! Transducer Production Line to Make the SPL Performance Stable. Shiny metal mesh grill.
  • Crossover Frequency Control allows you to adjust low frequency input: 50Hz – 150Hz. ¼” TRS input jack. Left and Right XLR input/outputs. RCA input/outputs. Woofer Impedance: 8 Ohm. Frequency Response: 34Hz - 150 KHz. 10" woofer with rubber surround and paper cone with painted.
Check Stock

fosa 28dbi High Gain 4G/3G LTE Antenna, Long Range Network Ethernet Outdoor Signal Booster Amplifier Receiver for Mobile Router for Huawei E398/E3276/E392(SMA Male)

  • Antenna height:8.6 inches (includes magnetic base).
  • Antenna extension cable length: 200cm/ 6.5ft.
  • Package Content:1pc dual WiFi RP-SMA antenna.
  • Application:wireless network router hotspot,wireless PCI PCI-E network card,notebook PC desktop computer external USB network adapter, WLAN AP & Hotspot wireless range extender.
  • Compatible with wireless security cameras.
  • car trailer tractor backup cameras, rear view cameras.
  • FPV Goggles, FPV receiver, FPV camera, FPV Drone controller.
Check Stock

Eightwood Dual WiFi Antenna with RP-SMA Male Connector, 2.4GHz 5GHz Dual Band Antenna Magnetic Base for PCI-E WiFi Network Card USB WiFi Adapter Wireless Router

  • Antenna height:8.6 inches (includes magnetic base).
  • Antenna extension cable length: 200cm/ 6.5ft.
  • Package Content:1pc dual WiFi RP-SMA antenna.
  • Application:wireless network router hotspot,wireless PCI PCI-E network card,notebook PC desktop computer external USB network adapter, WLAN AP & Hotspot wireless range extender.
  • Compatible with wireless security cameras.
  • car trailer tractor backup cameras, rear view cameras.
  • FPV Goggles, FPV receiver, FPV camera, FPV Drone controller.
Check Stock

Tone Generator Kit, Wire Tracer Circuit Tester, Tone Tracing Probe Kit, 200EP High Accuracy Cable Tester, Line Finder Toner Inductive Amplifier Variable Tone Generator for Network Cable Collation

  • 【High Quality】This tone and probe kit is made of high-quality materials, wear-resistant, corrosion-resistant. The gain is normal 30dB, the input impedance is nominal 100M Ohm, and please note that the wire tracker needs two 9V batteries(NOT INCLUDED)..
  • 【Powerful Functions】When used in conjunction with any tone generator, professional wire toner probe kit with adjustable volume is designed to identify and trace wires or cables within a group without damaging the insulation. The clamp mode can be used for direct measurement of non-terminal cables, as well as for telephone and network line measurement..
  • 【Safety and Easy To Use】Circuit tester has spring-loaded ON/OFF button.
  • recessed terminal ports for handset connection.
  • resistive plastic carbon-fiber tip prevents accidental shorts when probing wires. The method is simple and the test results are accurate. Insulation probe and built-in loudspeaker can effectively avoid short circuits of conductor and make it safer to use..
  • 【Application Range】200EP Tone generator and probe kit with probe are widely used in the maintenance of cables and wires. The measurement area includes line tracking, short circuit test, clear/busy/ringing identification..
Check Stock

Alpine SPS-110TW 1' Silk Dome Car Tweeters

  • SPS-110TW - Alpine 1" 200W RMS Type-S Series Tweeters with Passive Crossover Network.
  • Power Handling: Peak: 600 watts per pair / 300 watts each | RMS: 200 watts per pair / 100 watts each.
  • Pure Silk Soft Dome tweeter construction.
Check Stock

High Low Level Impedance Adaptor - Car Audio System RCA Line Output Converter Adapter w/ Adjustable Level Control - Works on Vehicle Amplifier, Equalizer, Home Theater Setup - Legacy LN60

  • CONVERTS TO RCA: The Legacy High/Low Level Impedance Adaptor provides an easy solution to a car audio system that doesn't have the proper connections for an equalizer or amplifier. It converts high level speaker output to RCA line level.
  • UNIVERSAL FIT: Hooks up to any domestic and foreign car models. Adds RCA line outputs so you can hook up equipment like a powered amplifier to your vehicle sound system. Also works with home audio equipments like for home theater setup applications.
  • ADJUSTABLE LEVEL CONTROL: The line output converter features adjustable level control providing a high quality with super low distortion end result.
  • EASY INSTALLATION: Features easy and hassle-free installation for convenience. Simply connect the stereo’s speaker wires to the line output converter’s inputs and use the RCA cables to run the signal from the LOC to your amplifier.
  • WORRY-FREE SHOPPING: With the Legacy LN60 High/Low Level Impedance Adapter we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked.
Check Stock

The Puppy Primer

  • Four-channel recording up to 24-bit, 96 kHz. Built-in stereo X/Y microphones, up to 140 dB SPL.
  • 2 XLR/TRS inputs with locking connectors. Records directly to SD/SDHC cards up to 32 GB.
  • 4-in/2-out USB audio interface. Monaural speaker: 400 mW 8 Ω.
  • Line/phone-LINE Output load impedance- 10 kΩ or more. LINE rated output level: -10 dBu. PHONE- 20 mW + 20 mW (into 32Ω load).
Check Stock

Eightwood 2.4GHz 5GHz Dual Band WiFi Antenna RP-SMA Male Connector with SMA Male to RP-SMA Female Adapter 2-Pack for PCI-E WiFi Network Card USB WiFi Adapter Wireless Router

  • Frequency: Dual Band WiFi 2.4GHz 5GHz 5.8GHz.
  • Antenna height:8.6 inches (includes magnetic base).
  • Antenna extension cable length: 200cm/ 6.5....
  • Application: wireless network router hotspot, wireless mini PCI express PCI-E network card, PC desktop computer external USB wireless network adapter,....
  • With SMA adapters, the kit can be used in wireless security system.
  • backup cameras/ rear view cameras/ parking cameras on car, pickup....
  • Package Includes: 1pc Dual WiFi RP-SMA male Antenna + 2pcs SMA male to RP-SMA female adapters.
Check Stock

High Low-Level Impedance Adaptor - Car Audio System RCA Line Output Converter Adapter w/ Adjustable Level Control - Works on Vehicle Amplifier, Equalizer, Home Theater Setup - Pyramid NS60

  • CONVERTS TO RCA: The Pyramid High/Low Level Impedance Adaptor provides an easy solution to a car audio system that doesn't have the proper connections for an equalizer or amplifier. It converts high level speaker output to RCA line level.
  • UNIVERSAL FIT: Hooks up to any domestic and foreign car models. Adds RCA line outputs so you can hook up equipment like a powered amplifier to your vehicle sound system. Also works with home audio equipment's like for home theater setup applications.
  • ADJUSTABLE LEVEL CONTROL: The line output converter features adjustable level control providing a high quality with super low distortion end result.
  • EASY INSTALLATION: Features easy and hassle-free installation for convenience. Simply connect the stereo speaker wires to the line output converter inputs and use the RCA cables to run the signal from the LOC to your amplifier.
  • WORRY-FREE SHOPPING: With the Pyramid NS60 High/Low Level Impedance Adapter we are confident of the quality of our product, therefore, we offer a 30 day money back no questions asked.
Check Stock