Top Line Inputs - BuyWiseBest.com

Behringer Europort PPA500BT 6-Channel Portable PA System with Bluetooth

...put connections : Two 1/4" jacks and one speakon jack. Two 16 ft speaker cables (1/4 to ). Rubber feet protect the enclosures. Maximum SPL : 111dB. Input connections : Two 1/4" jacks in parallel. Powder-coated steel grill. 8 Channel Powered Mixer with 1400 watt amplifier built in Built in Bluetooth connectivity. 17 Inputs!. 2 Speaker outputs and line output to connect a subwoofer or more speakers. USB / SD Input. MP3 Playback. LCD Display. Bluetooth connectivity.
350 Watts RMS / 600 Watts Program Power / 1400 Watts Peak into 4 ohm (2 x 8 ohm) speakers. 8 balanced XLR and microphone inputs. Tape/CD Line inputs. Master volume control. Bass, treble controls, and level controls on each channel. Reverb effect level control on each channel. Digital delay effect with independent level control. Phantom power for condenser mics!. 5 Band graphic equalizer. Line Out for connection to external amplifier. Return input for connection of external effects processors.
Record Out for taping. RF interference protection on all inputs. Aux Send Output : -10 dBv nominal, 1k ohms. Tape Rec Output : -10 dBv nominal, 1k ohms. Input lmpedance : Low-Z Mic: 1k ohms High-Z Line: 10k ohms Tape Input: 10k ohms. Input Channel Equalization : +/- 15 dB @ 5 kHz. Protection Circuit : Pow....

+19 / +4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monitors, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations..
Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity..
3. 5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3. 5 mm TRS lowered from 2 Ohms to 0. 1 Ohms..
Mic inputs SNR improved from 112. 2 dB to 113. 7 dB, TRS Line inputs SNR improved from 114 dB to 116. 3 dB (120 dBA). THD Line inputs improved by 8 dB..
6 samples less latency on the AD side by new ADC (5 samples AD, 7 samples DA. It won't get quicker. . . )..

Captures 16 mic and line inputs to your computer with clear sound quality and advanced features to manage big sessions.
Eight Ultra-HDDA microphone preamps deliver the cleanest and quietest operation in their class while delivering up to 56dB of gain.
An additional eight line inputs are provided, two of them switchable to instrument level for direct guitar or bass recording.
Eight balanced line outputs are also available, two with a level control on the front panel for monitoring.
Built in is a DSP Mixer for low-latency digital mixing, and each channel has four-band EQ and compression for polished-sounding monitor mixes.

...nes and turn each zone on or off. When both zones are playing it WILL play in stereo, Built in Bluetooth with 35 Foot range, USB input will play music files from a thumb drive or hard drive.
SD card playback will play music files stored on a memory card,Precision tuning with metal knobs,Mic mixer: 3 front microphone inputs with volume, tone, and echo control,Additional 2 rear mic inputs,Adjustable bass and treble music control,Adjustable bass, mid, and treble mic controls,Delay and repeat effect controls,Sets of RCA line/REC outputs,Set of RCA mic outputs,Removable 19” Rack mount brackets make this perfect for tabletop use or for rack mount applications.
Full function remote gives you easy access to all the important features, Built in pre-amplifier, Built in FM radio with manual tuning, and auto-scan, Built in quiet cooling fan, Bright blue LED display, Perfect for karaoke, DJ, KJ, home, and commercial applications, Rugged metal housing, 110V use only, Unit weight: 17.6 lbs (8 kg), Shipping weight: 22 lbs (10 kg), Unit dimensions: 16.9 inch x 13 inch x 5.1 inch.
Specifications: RMS @ 4 Ohm less than 1 % THD: 600 Watts RMS (300 x 2), RMS @ 8 Ohm less than 1 % THD: 400 Watts RMS (200 x 2), Peak @ 4 Ohm at 10 % THD: 2,000 Watts Peak (1000 x 2), Peak @ 8....

...rain feedback capacitance, lower thermal impedance for higher switching frequencies.
Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s).
High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
Warranty - Sound Storm provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professi....

POWER: Maximum Power Output of 5000 Watts at 1 Ohms into one channel. Maximum Power output of 2500 Watts at 2 Ohms into one Channel. This amplifier is....
HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the EV5000D to your factory....
LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the EV5000D with the source....
LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. A low-pass filter will....
VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

XLR & 1/4" mic inputs, RCA stereo line inputs, RCA stereo line out.
Emergency trigger all off except for Mic 1 + Mic ducking (auto attenuation of line ins when mic is in use).
70/100V allows numerous speakers to be connected without complicated impedance calculations.

Built-Like-A-Tank to conquer every gig while lightweight for easy loading.
Frequency response: 38Hz – 20kHz (-10dB).
Inputs 1 and 2 feature XLR/TRS combo inputs. Inputs accept both line and mic level.
Mix output contains audio from both input channels.