Top Line Lock Kit

Prime-Line Products E 2294 Mortise Keyed Brass Knob – Perfect for Replacing Broken Antique Lock Sets and More Fits 1-3/8 inch-1-3/4 inch Interior Doors single pack

  • BREPLACe ANTIQUE MORTISE LOCK SETS – The vintage look of the Prime-Line E 2294 Mortise Lock Assembly Kit is a great match for the old lock sets found in period homes. Used with antique and vintage door hardware, the kit is an economical replacement for indoor mortise locks. .Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit..
  • EASY INSTALLATION – Installation is quick and easy, and all mounting screws are included. The mortise lock easily slides into the existing door pocket for an fix for a broken lock. It has a 2-3/8” backset with a 9/32” square spindle drive that accepts a maximum spindle size of 1/4”..
  • STEEL WITH BRASS-PLATED FINISH – The E 2294 lock is constructed from case-hardened steel and features a faceplate with a bright, brass-plated finish. The kit includes a latch and deadbolt strike with fasteners (door knobs, square spindle, spare keys and trim plates sold separately) and two skeleton-style keys..
  • LEFT OR RIGHT-HANDED INTERIOR DOORS – The mortise caselock ships handed (to close in a certain direction) but the latch can easily be reversed for opposite swinging doors..
  • INSTALLATION TIP – Although the square drive on the latch has a 9/32” opening, it will only accommodate 1/4....
Check Stock

Residential Misting System- Made in USA Pump- 200 psi Mid Pressure Patio Misting System-12 Nozzles Misting System

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: - 200PSI Booster Pump with Plug (110v) - 50ft Flexible Tubing – Calcium Inhibitor Filter - 12 Brass/Stainless Steel Mist Orifice Nozzles - 0.012'' - 11 - Push Lock Mist Tees - 1 - Push Lock End Mist Elbow - 6ft Feed line with 3/4 Garden hose connector - Plastic Clamps.
  • {Installation} - Push Lock Fittings - Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock. MC12020.
Check Stock

【2 Pairs】MRbrew Ball Lock Disconnect Set, Home Brew Ball Lock Keg Fittings with MFL Thread Swivel Nuts, Corny Keg Fittings with Stainless Steel 5/16'' Gas & 1/4'' Liquid Barbs & Extra 4 Hose Clamps

  • 1.Include: Ball Lock Disconnect Set and Beer Keg Coupler Adapter.
  • 2.Material: PBT Material for Ball Lock Disconnect Set and Stainless Steel for Keg Coupler Adapter and Swivel Nuts.
  • 3.Easy to Use, the Ball Lock Disconnect can Connect Sankey Keg Coupler Adapter Directly.
  • 4.Clear to Identify, the Gas Post has a Deep Subtle Etched Line, the Liquid Post has no Line, it will be convenient to switch between commercial kegs and hombrew co2 tanks with this Sankey to Ball Lock disconnect conversion kit.
  • 5.Quality Guarantee, Money Return or Free Replacement..
Check Stock

Line Lock Roll Control Brake Lock,Universal Launch&line lock kit for brakes Electric Solenoid Kit(Black)

  • Brake line lock can be widely used in various models which allows the front brakes to lock independently of the rear brakes via a switch. It also allows the front brakes to be locked and the rear brakes to be open, so that the driver to spin the rear wheels without wasting the rear brakes..
  • Easy to do a burn out by locking the front tires and releasing the back brakes with this system. Line locks are often used for burnouts by fully locking the front wheels and then engaging the gas pedal and disengaging the clutch pedal, this makes the rear tires spin but keeps the car stationary.
  • Each kit includes a inline fuse connector, indicator light, snap-action switch, 2pcs 1/8-27NPT brass adapter and 3pcs mounting screws. High quality stainless steel valve assembly gives it strong sturdiness.Works with 12 -24 volt electric systems.
  • Fully-enclosed epoxy-molded electrical coil makes it reliable.
  • The attractive aluminum fin shell enables it to cool down.
  • The wider lightweight base provides better mounting stability.
  • besides, it has extra threaded port for brake line pressure gauge..
  • ATTENTION: This line lock is to be installed in the front braking system (for rear wheel drive vehicles) for drag race staging or burnouts. Alternatively, in the rear braking system for....
Check Stock

Prime-Line E 2400 Re-Keying Kit – Re-Key a Lock Kit with Pre-Cut Keys for Rekeying all your Locks to One Key, For Kwikset Brand Locks, 5-Pin Style Locks

  • REKEY YOUR LOCKS – Prime-Line E 2400 re-keying kit allows you to rekey all your locks to one, pre-cut key. Note: This kit is not designed to re-key locks to any other existing key, but rather only to the pre-cut keys included with each kit..
  • INCLUDES – Re-Key a Lock Kit includes 3 pre-cut keys, pins, special tools and simple-to-follow instructions..
  • FOR PIN STYLE LOCKS – Re-Keying kit works for Kwikset brand locks, 5-pin style..
  • EASY INSTALLATION – Re-keying your locks is easy with this kit – even a novice can complete the DIY task..
  • REQUIRES – Rekeying kit requires original key to lock being rekeyed as part of the re-keying process..
Check Stock

Prime-Line E 2404 Re-Keying Kit – Re-Key a Lock Kit with Pre-Cut Keys for Rekeying all your Locks to One Key, For Weiser Brand Locks, 5-Pin Style Locks

  • REKEY YOUR LOCKS – Prime-Line E 2404 re-keying kit allows you to rekey all your locks to one, pre-cut key. Note: This kit is not designed to re-key locks to any other existing key, but rather only to the pre-cut keys included with each kit..
  • INCLUDES – Re-Key a Lock Kit includes 3 pre-cut keys, pins, special tools and simple-to-follow instructions..
  • FOR PIN STYLE LOCKS – Re-Keying kit works for Weiser brand locks, 5-pin style..
  • EASY INSTALLATION – Re-keying your locks is easy with this kit – even a novice can complete the DIY task..
  • REQUIRES – Rekeying kit requires original key to lock being rekeyed as part of the re-keying process..
Check Stock

Ferroday 3ft Ball Lock Beer Line Assembly Liquid Line Picnic Tap Ball Lock Quick Disconnect Faucet Food Safe Clear Tube Kit for Cornelius Keg Wine Making Soda Dispensing Keg Fitting

  • 【Package Includes All You Need】: 2 x picnic tap, 2 x 3ft clear beer line, 2 x ball lock disconnect, 2 x swivel nut, 4 x hose clamp. (All PRE-ASSEMBLED, has everything you need to hook a line to your keg and dispense your homebrew..
  • 【No Leakage Healthy Material】: Healthy food safe clear tube for beer and soda, NO harden NO yellowing NO brittle NO kink NO leakage after hundreds of test.
  • Hand squeeze picnic faucet with a tapered inlet, fits tightly with our customized beer line tubing, NO leakage, NO blockage..
  • 【Widely Used for Parties】: A great tool when you're out serving homebrew for a party, wedding, banquet or BBQ, use this awesome faucet kit to dispense your homebrew on the go. Perfect for Cornelius Kegs, for corny Kegs, for Ball Lock Kegs..
  • 【Durable & Practical】: High quality safe ABS ball lock disconnect, allows you to connect a tube onto your keg, put on/ take off easily. All the swivel nuts and clamps are made of healthy stainless steel, rustproof and durable. Also easy to take apart for cleaning..
  • 【Economical Choice & Life Time Service】: A great value product, won't cost much to get 2 premium quality ball lock beer line assembly sets. We are committed to offer you with high quality product as well as superior service! Please f....
Check Stock

Prime-Line E 2402 Re-Keying Kit – Re-Key a Lock Kit with Pre-Cut Keys for Rekeying all your Locks to One Key, For Schlage Brand Locks, Type “C” 5-Pin Style Locks

  • REKEY YOUR LOCKS – Prime-Line E 2402 re-keying kit allows you to rekey all your locks to one, pre-cut key. Note: This kit is not designed to re-key locks to any other existing key, but rather only to the pre-cut keys included with each kit..
  • INCLUDES – Re-Key a Lock Kit includes 3 pre-cut keys, pins, special tools and simple-to-follow instructions..
  • FOR PIN STYLE LOCKS – Re-Keying kit works for Schlage brand locks, “C” 5-pin style..
  • EASY INSTALLATION – Re-keying your locks is easy with this kit – even a novice can complete the DIY task..
  • REQUIRES – Rekeying kit requires original key to lock being rekeyed as part of the re-keying process..
Check Stock

Jorvet Collapsible Empty IV Bag 1000ml

  • PRESSURE MONITORING LINE: Used to connect a syringe infusion pump to a patient and monitor high pressures and connections..
  • PVC TUBING: With size of 72-inch or 182.9 cm PVC pressure monitoring line and a universal male and female luer lock that ensures a secure fit on all standard equipment..
  • STERILE AND DISPOSABLE: The latex-free medical instrument is single use to prevent cross contamination and safety between patients..
  • MEDICAL NURSING KIT: The pressure monitoring line is ideal use for extending medical tubing and pressure monitoring at hospital and healthcare settings..
  • PRODUCT QUANTITY: The Smiths Medical Medex Monitoring Lines comes in a case of 25..
Check Stock

Idiomum Retractable Clothesline 40 Feet - Indoor Outdoor Heavy Duty - PVC Clothes Line Retracting - Clothesline with Wall Mount - Retractable Laundry Line for Drying Clothes with 12 ClothesPins

  • ✅ EFFORTLESS INSTALLATION – 40 feet heavy-duty laundry line retractable clothesline is lightweight yet can bear up to 30 lbs weight. Screws, screw-jackets and a Hook is included in the package.
  • ✅ PREMIMUM QUALITY: Special ABS material in cloths line outdoor makes it sturdy, durable & rust resistant. Our clothes line retracting indoor is fully assembled with a lock to prevent sagging & its ready to be used in Hotels, Patio, Balcony, Bathroom, Shower, Deck, Camping and more.
  • ✅ EASY TO USE – Mount the clothes line string outdoor within few seconds. Simply pull the retractable clothes line outdoors rope to the length that you need using the lock button & easily retract clothes drying line and put it away when not in use..
  • ✅SPACE SAVING – Use retractable outdoor clothesline retractable without paying massive electric bills. Use it while you travel, in your bathroom, balcony, laundry or at backyard We want to make your life easier, screws, screw-jackets and a hook in the package. You don't have to rush to the departmental store..
  • ✅ NO QUESTIONS ASKED WARRANTY – We’ve put our level best quality in making the Outdoor retractable rope line, we’re confident you’ll love our clothesline kit but in case if you don't, we’ll happil....
Check Stock

Prime-Line E 2402 Re-Keying Kit – Re-Key a Lock Kit with Pre-Cut Keys for Rekeying all your Locks to One Key, For Schlage Brand Locks, Type “C” 5-Pin Style Locks

  • REKEY YOUR LOCKS – Prime-Line E 2402 re-keying kit allows you to rekey all your locks to one, pre-cut key. Note: This kit is not designed to re-key locks to any other existing key, but rather only to the pre-cut keys included with each kit..
  • INCLUDES – Re-Key a Lock Kit includes 3 pre-cut keys, pins, special tools and simple-to-follow instructions..
  • FOR PIN STYLE LOCKS – Re-Keying kit works for Schlage brand locks, “C” 5-pin style..
  • EASY INSTALLATION – Re-keying your locks is easy with this kit – even a novice can complete the DIY task..
  • REQUIRES – Rekeying kit requires original key to lock being rekeyed as part of the re-keying process..
Check Stock

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560)..
  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads..
  • Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
  • 5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
  • 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting instal....
Check Stock