Top Line Out Converter For Subwoofer

Rockville Rock Shaker 10\\\ Inch Wood 600w Powered Home Theater Subwoofer Sub, Rock Shaker 10 Wood

  • Features: Rockville Rock Shaker 10 Wood 600 Watt Powered 10" Home Theater Subwoofer, 600 Watts Peak / 300 Watts RMS, Built-in Class D Amplifier, Enclosure is made of top quality MDF wood. (MDF wood sounds better and lasts longer than particle board), High-grade vinyl enclosure covering with a beautiful finish, The enclosure is built with the perfect air space to maximize sound quality and punch, The rear firing port is engineered for optimal sound.
  • Class “D” Amplifier Circuitry with Auto-Switching Power Supply, High-grade woofer with foam surround and paper cone, Woofer has a Y30 grade magnet, and 1.5” 4-layer voice coil, Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!, Enclosure is filled with fire resistant poly cotton, Detachable foam grill.
  • Inputs / Outputs / Controls: RCA line input, RCA line output, Speaker High level inputs, Speaker High level outputs, Volume control, Phase switch (0°-180°), Crossover Frequency control, Power switch, Standard IEC power cable included.
  • Specifications: Amplifier: Class D, Woofer Impedance: 4 Ohm, Signal to noise ratio: 85 dB (Maximum output with THD+1003c1%, A-weight), THD: 1%, INPUT sensitivity: 88dB +/- 2dB, Frequency Response: 20 Hz - 200 Hz, 600 Watts peak output, 300 Watts RMS ....
Check Stock

Pyle Car Stereo Wiring Kit - Audio Amplifier & Subwoofer Speaker Installation Cables (4 Gauge), Blue (PLAM40) & PAC SNI-35 Variable LOC Line Out Converter

  • Product 1: CAR AUDIO WIRING: Universal car stereo audio system cable and wire kit. Includes all necessary pieces to set up your amplifier and subwoofer speakers.
  • Product 1: INCLUDED AUDIO CABLES: 20’ ft. 4 gauge red power wire, 4’ ft. 4 gauge black ground wire, 20’ ft. 16 gauge blue remote turn-on, 20’ ft. 12 gauge stereo speaker wire.
  • Product 1: MORE AUDIO CONNECTION: 20’ ft. stereo RCA audio cable, 6’ ft. black split loom cable conduit - enables connection for amplifier and subwoofer speakers.
  • Product 1: CAR STEREO SOUND: Also includes (2) ring terminals 8G, (2) spade terminals: 8G, (5) spade terminals: 14-16G, (3) butt connector, (20) cable ties, (1) black grommet.
  • Product 2: Adjustable Line Output Converter.
  • Product 2: Use the SNI-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier (RCA) level input.
  • Product 2: Utilize Audio Transformer for Noise Isolation.
Check Stock

Powered Subwoofer, Bestisan 6.5\ Active Home Audio Subwoofer in Compact Design,LFE & Stereo Line Inputs & Audio Output, Built-in Amplifier for Home Theater/Receiver/TV/Speakers, Black, SW65D

  • Powered Subwoofer For Extra Bass & Punch- The 6.5" powered subwoofer features continuously variable 60-250hz crossover and 40-250hz frequency response. The enclosure is built with the perfect air space to maximize sound quality and punch..
  • Lfe & Line Inputs For Compatibility With Most Receivers& Bookshelf Speakers– Hook a subwoofer cable (not supplied) between subwoofer out port on the receiver/ bookshelf speakers and LFE input RCA port on the sub..
  • Connect To Laptop And Soundbar- Hook the Stereo RCA to 3.5mm audio cable in the box between line inputs on the subwoofer and headphone jack on your laptop, then connect to sound bar from aux out on sub to aux in on soundbar with 3.5mm audio cable (not supplied)..
  • 6.5 Inch Side Firing Woofer-Long throw woofer with high rigidity PVA Treated cone, side slotted port, Bass Reflex cabinet design with vibration absorbing feet, high quality MDF with added internal bracing and black ash finish..
  • 100% Satisfaction Service- Bestisan offers lifetime technical support. Any questions or suggestions, pls freely email us for help. We absolutely give you a satisfied solution..
Check Stock

MTX TNP212D2 12' 400W RMS Dual Loaded 1200W Car Subwoofer Enclosure Audio with Sub Box, Mono Block Amplifier, 8 Gauge Amplifier Amp Complete Wiring Installation Kit and Hi/Low Converter

  • ...edium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT & CONVERTER: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • Converter: Hi/Low Impedance Adapter, RCA Input Sensitivity Adjustment Control.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches.
Check Stock

BESTISAN Subwoofer, Powered Home Audio BESTISAN Sub woofer with Deep Bass in Compact Design, Easy Integration with Receivers/TV/Soundbars/Speakers, LFE & Stereo Line Inputs & Audio Output, Black,SW65C

  • POWERED SUBWOOFER FOR ROOM-SHAKING BASS- This sub has a frequency response range of 40 to 250 Hz with a low-pass crossover filter, which can be adjusted through the full range, pumps dynamic theater-quality bass into your bedroom and apartment..
  • LFE & LINE INPUTS FOR COMPATIBILITY WITH MOST RECEIVERS& BOOKSHELF SPEAKERS– Hook a subwoofer cable (not supplied) between subwoofer out port on the receiver/ bookshelf speakers and LFE input RCA port on the sub..
  • 6.5 INCH DOWN FIRING WOOFER - Long throw woofer with high rigidity PVA Treated cone, bottom slotted port, Bass Reflex cabinet design with vibration absorbing feet, high quality MDF with added internal bracing and black ash finish..
  • ADJUSTABLE VOLUME AND LOW-FREQUENCY- Independent volume and low-frequency bandwidth adjustment knob located on the back panel of the subwoofer allows you to adjust the volume and low-frequency bandwidth according to your preference..
  • CONNECT TO LAPTOP AND SOUNDBAR- Hook the Stereo RCA to 3.5mm audio cable in the box between line inputs on the subwoofer and headphone jack on your laptop, then connect to sound bar from aux out on sub to aux in on soundbar with 3.5mm audio cable (not supplied)..
  • 100% SATISFACTION SERVICE- Bestisan offers lifetime technical support. Any question....
Check Stock

Monoprice 602520 Microphone Stand with Boom

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

Monoprice 6.5in and Ribbon Tweeter 2-Way Bookshelf Speakers (Pair) Black

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

Bose Sub 1 Powered Bass Module for L1 PRO Systems and powered loudspeakers - Powered Subwoofer for Loudspeakers

  • Powerful Subwoofer - The Bose Sub1 adds powerful bass to your portable PA system with low-end range down to 40 Hz..
  • Portable design - Compact design with small footprint. Features unique 7” × 13” high-excursion RaceTrack driver.
  • performance rivals a traditional conventional 12” subwoofer..
  • Add more bass with multiple subwoofers - Stack multiple Sub1 subwoofers for even more bass. Enable Cardioid Mode for focused, directional bass performance that directs bass out front and reduces feedback..
  • Pair with Bose PAs and other powered loudspeakers - Combines seamlessly with Bose L1 Pro32 portable line array via proprietary SubMatch cable. Pair with other powered loudspeakers via line input and output with selectable crossover modes..
  • Easy to use - Easily adjust subwoofer volume with independent sub level control knob to get more bass when you need it, and less when you don’t..
Check Stock

Monoprice 60-Watt Powered Subwoofer - 8 Inch With Auto-On Function, For Studio And Home Theater Black

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

Monoprice Above Fireplace Height Adjustable Swivel TV Pull Down Mantel Wall Mount for LCD LED Plasma Screen Displays 40 Inch to 63 Inch, Maximum weight 70lbs

  • This is an 8" powered subwoofer capable of producing 60 watts (RMS) output. The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers..
  • The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5.1 (or greater) amplifier system. For each input there is a corresponding output..
  • High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. When connecting the unit as part of a 5.1 system, these would be taken off the Front Left and Front Right outputs in parallel to the standard pair of front speakers. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier..
  • Additionally, the subwoofer has a set of right/left Line Level inputs. If using a standard stereo system, without a special subwoofer output, you can connect these to the left and right line level outputs on the amp. The subwoofer....
Check Stock

Massive Audio P8 Primo Series. 3,500w RMS / 7000w MAX, 0.5 Ohm Stable, Class D, Monoblock Mega Car Amplifier with Bass Boost & Clip LED

  • HIGH POWER CAR AUDIO AMPLIFIER: These high quality amplifiers are extremely powerful! This 12 volt car audio amplifier features: 1400 x 1 RMS @ 2 Ohm / 7000w x 1 Peak Power, Freq. Response 10Hz - 220Hz, Built-In OEM Line Converter, Bass Boost 0dB~12dB. Our monoblock amplifiers for cars, boats and off road vehicles provide rich clean power for your subwoofers!.
  • PRODUCES POWERFUL, CLEAN, FULL SOUND: Our amplifiers are very efficient and powerful and provide you with a real value that you can hear for yourself. Our mono car subwoofer amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal. This Primo P8 incorporates a clip liit switch that allows up to 16.5 Volts plus a Parametic EQ with 0 - 12 dB Bass Boost for even more customization..
  • QUALITY TESTED AND GUARANTEED TO GO BEYOND RATED POWER: Hits its full power or more all the time! That is our guarantee! You don't need to set the gain to low to avoid distortion. Also, by sensing the DC offset of a factory radio it can activate the Built-In (ATO) Auto Sensing Turn On Function (Hi-Low Converter).
  • GREAT QUALITY PRODUCT THAT WILL LAST LONGER: Don't settle for underpowered and underwhelming car stereo monoblock amplifiers! With our extra features like 12V Rem....
Check Stock

MTX Audio TNP212D2 Terminator Power Pack Subwoofer System - Set of 2,Black & PAC SNI-35 Variable LOC Line Out Converter

  • Product 1: Complete amplified bass package bundles 2 x 12 subwoofer enclosure and mono block amplifier.
  • Product 1: TNA251 amplifier delivers 250 watts x 1 at 2 ohms.
  • Product 1: Variable low- and high-pass filters offer 40Hz–400Hz range for sound shaping.
  • Product 1: TNE212D2 enclosure features dual 12-inch Terminator subwoofers with 1200 watts max power.
  • Product 2: Adjustable Line Output Converter.
  • Product 2: Use the SNI-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier (RCA) level input.
  • Product 2: Utilize Audio Transformer for Noise Isolation.
Check Stock