Top Linear Ball Screws

Linear Rail Kits 2Pcs SBR20-2000mm(78.7 inch) Linear Rail with 4Pcs SBR20UU Bearing Linear Guide Slide Blocks for Fully Supported Linear Rail

  • 2000mm Linear Rail Slider Set: This linear rail set is of 2Pcs SBR20 2000mm/78.7 inch linear rail and 4Pcs SBR20UU Block.
  • Sports performance under high load or long stroke, high precision, smooth moving, low friction, high performance and easy to mount & dismount.
  • Cooperate with open linear bearing to ensure excellent sports performance, and metal linear bearing, its more durable than Plastic linear bearing.
  • Perfect combination of main axle and aluminum alloy support, which nicely stabilizes the original rail. Premier quality bearing blocks moves smoothly while using.
  • Linear motion ball bearing set is widely used for digital 3D coordinate measuring equipment such as precision equipment or special machinery industry. Suitable for kinds of electronic equipment/guide bar, drive shaft, and pillar.
Check Stock

Linear Rail SBR12-1200mm Linear Rail Guide CNC Parts, 59inch Fully Supported Linear Rail+2pcs SBR12UU BlockBearing Block Bearing for DIY CNC Routers Lathes Mills Automated Machines

  • 【wide application】This linear rail and block are small and lightweight, suit for small equipment. Especially suit for automatic equipment, precision measuring equipment, and many other machines that need precision linear movement..
  • 【good strength and high accuracy.】This linear rail set adopted 4-point contact design, it can bear load from every direction, and has good strength and high accuracy..
  • 【ball retainer】This linear motion guides designed with ball retainer, which allows interchangeability in the case of small precision..
  • 【block has lubrication system】Block has lubrication system.
  • lubrication oil can be easily put into the oil inlet on the side, will work smoothly..
  • 【variety size and high quality 】This rail set is made of high quality bearing steel which is sturdy and has a long service life, 5 size for you to choose, can meet your different needs..
Check Stock

8 Inch Ball Screw Actuator, Linear Motion Actuators with Handwheel Manual Sliding Table CNC Linear Guide Stage Linear Motion Slide Rails Linear Bearings and Rails 200mm Stroke

  • Dimension: 8x400mm linear rail motion shaft guide set.
  • The linear rail made of good quality steel and aluminum alloy.
  • It can move smoothly without deflection minimal wear and low noise, because the high accuracy and strong durability.
  • The linear rails apply for large-scale transmission equipment including industrial robots, cracker machines, supersonic cleaning equipments, solar energy and clothing supporting devices, etc.
  • Package Content: 2Pcs Linear Shaft Optical Axis 8x400mm + 4Pcs Linear Rail Shaft Guide Support SK8 + 2Pcs SCS8UU Linear Motion Ball Bearing Slide Bushing.
Check Stock

2Pcs 400MM HGR20 Linear Guide Rail with 4 Bearing Block,1Pcs 400MM SFU1204 Ball Screw with Metal Deflector Ball Screw Nut

  • 【COMPLETE LINEAR RAIL KITS】This linear Guide Rail is of 2 * 400mm HGR20 Linear guides kit and 1 * 400mm SFU1204 ballscrew kit..
  • 【400mm HGR20 Linear guides kit】2* HGR20-400mm rail shafts，4 * HGH20CA blocks.
  • 【SFU1204-400mm ballscrew kit】End Machined ballscrew SFU1204-400mm L with nut+BK10/BF10+Ball nut Housing+Coupler.
  • 【HIGH-QUALITY STEEL MATERIAL】Linear guides are made of carbon steel, linear bearings made of GCr15 bearing steel, more durable and low nois.Low friction coefficient.high accuracy of the trajectory..
  • 【WIDE APPLICATION】Perfect for your DIY routers, mills, lathes, widely used in the automation machinery and also suitable for automatic equipment, precision measuring equipment..
Check Stock

Sydien 4Pcs SCS12UU Linear Motion Ball Bearing CNC Slide Blocks 12mm Inner Diameter

  • [SIZE] - Model: LM6UU, 6x12x19mm Metric Double Seal Linear Bearing.
  • [USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways..
  • [FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter.
  • [CAPABILITY] - Static Load Capacity (Cor): 206N, Dynamic Load Capacity (Cr): 265N (Recommended load is 80% of rated load, not to exceed rated load.).
  • [APPLICATIONS] - Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, ect..
Check Stock

uxcell LM8UU Linear Ball Bearings 8mmx15mmx24mm Carbon Steel for CNC Machine 3D Printer 10pcs

  • Quantity & Size - These linear motion bearings have a total of 10 bearings for different projects, size about 12 x 20 x 30mm: 12mm inner diameter, 20mm outer diameter, 30mm height.
  • LM12UU Bearings - Linear motion ball bearing is made of high quality bearing steel for low noise and long service life.
  • Excellent Rotating Accuracy - Prevent tilt friction between the roller of roller.
  • Double sealed to avoid contaminants entering and save lubricant.
  • Smooth Running - Moment of inertia is low, low starting torque, easy to control the angle degree, runs smooth on rods.
  • These ball bearings are great for small hobby 12mm shaft or rod projects.
  • Widely Used - LM12uu linear bearing is widely used in automation equipment / Electronics / Instrument / Robot / Food machinery / Packaging machinery / CNC machinery.
Check Stock

Imdinnogo BCZAMD V2 Aluminum Y Carriage Plate Upgrade for Prus i3 Style Heatbed Hotbed Reprap DIY 3D Printer Parts Black

  • Prus i3 V2 board size: 219mmx219mmx3mm. Suitable for Prusa i3 style 3d printer, MK1/2/A/B heated bed..
  • With 2 additional preparation holes for 3-point horizontal adjustment of the block surface..
  • Allows for 3 x linear bearing configurations as well as 4 x bearing configurations. Made of hard, tempered aluminum alloy with brushed and anodized....
  • Skeleton is similar in design to the original Prusa i3 Y model. This helps with Y-motor cleaning when you use LM8UUs on the shoulder straps..
  • Linear bearing mounting options: LM8UUUUa (M3x12 screws and M3 nuts), SC8UUUU (M4x10 screws) and SCV8UUUU (M4x10 screws)..
Check Stock

Iverntech MGN12 400mm Linear Rail Guide with MGN12H Stainless Steel Carriage Block for Ender 3, Corexy, Tronxy, Delta Kossel 3D Printers Upgrades and CNC Machine

  • Surface technology: Anti-oxidation by electroplating (nickel plating).
  • Rail Guide Material: bearing steel. Rail Guide Length: 400mm.
  • Block: MGN12H ball bearing carriage. Block material: Stainless Steel. Blocks are pre-loaded.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile.
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out.
Check Stock

Yeahmart Linear Rail 2 Pcs 8mm x 400mm Cylinder Liner Rail Linear Shaft Optical Axis + 4 Pcs Rod Rail Shaft Support SK8 + 2Pcs Linear Motion Ball Bearing Slide Bushing SCS8UU

  • Dimension: 8x400mm linear rail motion shaft guide set.
  • The linear rail made of good quality steel and aluminum alloy.
  • It can move smoothly without deflection minimal wear and low noise, because the high accuracy and strong durability.
  • The linear rails apply for large-scale transmission equipment including industrial robots, cracker machines, supersonic cleaning equipments, solar energy and clothing supporting devices, etc.
  • Package Content: 2Pcs Linear Shaft Optical Axis 8x400mm + 4Pcs Linear Rail Shaft Guide Support SK8 + 2Pcs SCS8UU Linear Motion Ball Bearing Slide Bushing.
Check Stock

10pcs LM12UU 12mm Linear Motion Ball Bearing Bushing for 12mm Rod 3D Printer CNC Parts

  • [SIZE] - Model: SCV13UU, 44 x 20.9 x 30mm Metric Double Seal Linear Bearing, 13mm Nominal Shaft Diameter.
  • [USAGE] - Linear bearings are part of linear motion systems, often used in conjunction with cylindrical shafts or guideways..
  • [FEATURES] - These ball bearing with two rubber dust sealed to prevent ingress of dirt, water and foreign matter.
  • Aluminium alloy housing to provide high strength and stiffness..
  • [CAPABILITY] - Static Load Capacity (Cor): 784N, Dynamic Load Capacity (Cr): 510N (Recommended load is 80% of rated load, not to exceed rated load.).
  • [APPLICATIONS] - Mechanical slides, 2-axis and 3-axis tables, linear tables, 3D printers, ect..
Check Stock

Usongshine MGN9C Linear Rail Bearing Sliding Block Match use with MGN9 Linear Guide for CNC xyz DIY Engraving Machine (200mm, C-Type)

  • Surface technology: Anti-oxidation by electroplating (nickel plating).
  • Rail guide material: bearing steel. Rail guide length: 300mm.
  • Block: MGN12H ball bearing carriage. Block material: Stainless Steel. Blocks are pre-loaded.
  • Suggested to use M3 T nut and screws if you fix it to 20 series EU Al-profile.
  • There are two rubber stoppers on each side of the linear rail, it can prevent the carriage block from falling out.
Check Stock

Aexit LM8UU 8mmx15mmx24mm Bearings & Bit-Repair Parts Linear Motion Bushing Ball Bearing Silver Bearings Tone 10pcs

  • Package Content: 10pcs x Linear Ball Bearing.
Check Stock