Top Linear Probe Vaginal Probe

Swagger: Unleash Everything You Are and Become Everything You Want

  • ...cal, boiler and pressure vessel, steel structure, military, aerospace, railway transportation, automobile, machinery and other fields. It is an essential instrument for the non-destructive.
  • Measurement display mode: positive wave,negative wave,full wave and wave.
  • It has a linear suppression function, the maximum inhibition is 80% of the screen height.
  • It can switch between single crystal probe, double crystal probe and two inspection modes.
  • It has a gate setting and alarm function. The position and width of the gate can be arbitrarily set on the screen, and an incoming wave alarm can be set.
  • 500 independent detection channels, each channel set a separate set of testing parameters, DAC curve.
  • Two display modes with angle and K value.
  • The DAC curve is generated automatically, and up to 10 points can be recorded, with four additional adjustable offset curves.
  • AVG curve is generated automatically, and two types of defects can be customized.
  • With storage function, it can store 100 A sweep patterns, parameters and DAC curve.
  • Has a storage graphics playback function, the stored A-scan graphic....
Check Stock

VTSYIQI Ultrasonic Flaw Detector Flaw Detection Tools with USB PC Software Color Display

  • ... been applied for electric power, petrochemical, boiler and pressure vessel, steel structure, military, aerospace, railway transportation, automobile, machinery and other fields. It is an essential instrument for the non-destructive.
  • Measurement display mode: positive wave,negative wave,full wave and wave.
  • It has a linear suppression function, the maximum inhibition is 80% of the screen height.
  • It can switch between single crystal probe, double crystal probe and two inspection modes.
  • It has a gate setting and alarm function. The position and width of the gate can be arbitrarily set on the screen, and an incoming wave alarm can be set.
  • 500 independent detection channels, each channel set a separate set of testing parameters, DAC curve.
  • Two display modes with angle and K value.
  • The DAC curve is generated automatically, and up to 10 points can be recorded, with four additional adjustable offset curves.
  • AVG curve is generated automatically, and two types of defects can be customized.
  • With storage function, it can store 100 A sweep patterns, parameters and DAC curve.
  • Has a storage graphics playback function, the stored A-scan graphics from the storage area and displayed on the screen.
Check Stock

SeedRanch Falcon IV Turf Type Tall Fescue Grass Seeds - 50 lbs.

  • ... This hydroponics tester has ATC that provides consistent reading regardless of any fluctuations in temperature.
  • High and low alarm when outside parameters, selectable units include TDS, EC, ppm 500, ppm 700 and CF.
  • Lab quality glass pH probe with easy two point calibration.
  • Conductivity / temperature probe comes factory calibrated so it's ready to be used.
  • Double junction probe is more accurate than test strips and drops.
  • Combine with Bluelab pen and meter for full garden nutrients monitoring in water and soil.
  • Other features: International power supply, water resistant design.
  • KIT INCLUDES: Calibration solution, EC probe and pH probe, probe care kit is sold separately.
  • Made in New Zealand and manufactured by Bluelab, the industry leader in hydroponic testing equipment, built for growers.
  • 2-Year Limited Warranty with proof of purchase (6-month warranty for pH probe).
Check Stock

Replacement Probe for ThermoPro Work TP20 TP08S TP25 TP27 TP28 500FT

  • [Hassle-Free Setup] Replacement Thermometer Probe.
  • Also Suit for TP20 TP-08S TP-07 TP06S TP09 TP10 TP11 TP16 TP17 TP21 TP22.
  • 2pcs Replacement Thermopro probe/additional probe for Monitor the grill meat smoker or ambient temperature.
  • [High-Temperature, Waterproof an Probe and Wire can withstand up to 716°F(380°C). The tip of the probe tube can be run under a tap or cleaned with a....
  • [Accuracy & Wide Temperature Range] The replacement high-temperature meat probe Accurate within ±1.8°F, Monitor temperature range 32°F to 716°F..
Check Stock

DecorStar Digital Meat Thermometer, 2 in 1 Instant Read Food Thermometer with Folding Probe and Oven Safe Wired Probe, Waterproof Cooking Thermometer for Kitchen, Grilling, Baking, BBQ, Candy, Milk

  • ...inds of common meat selection and others alarm setting, you can preset a temperature you want before cooking or baking, once reaches the set value, the meat thermometer will beep and flash the screen to remind you, which greatly help to control the food temperature..
  • 【Quality Assurance】This food thermometer probe is made of food grade 304 stainless steel, the hand shank shell is made of eco-friendly ABS. With CE, FCC, RoHS certification, you can use this kitchen cooking thermometer with safely and reliably. We also provide 12 months warranty, please contact us at any time if have any issue..
  • 【Easy to Use and Storage】The folding probe supports 180° rotation, open the probe to turn on, fold the probe to turn off and it will shut down automatically after 10 minutes of no operation to save power. The hanging hole and built in magnets makes it easy to storage, you can hang the food thermometer on the kitchen hooks or attach it to the refrigerate..
  • 【Instant Read and Accurate】DecorStar digital meat thermometer probe is 3.5mm in diameter, keeping it in food for 2-3 seconds, you will get the accurate temperature (±1°C/±2°F) and has a wide range of -50℃ to 300℃ (-58℉ to 572℉). Whether to frying, grill or baking, this meat thermometer....
Check Stock

RTD Temperature Probe Sensor Replacement for Traeger Digital Thermostat Traeger Pellet Grills Grill Oven

  • > Compatible with all Traeger Wood Pellet Grills (EXCEPT PTG) with digital control meat probe capability, please check spade connector style before....
  • > Strict quality control standards to Build and test. Not OEM but quality exceeds OEM requirements. Easily spliced to thermostat leads, no tool....
  • > 37"(18cm) Internal Grill Sensor Probe, 47"(120cm) Heat Woven Wires. Screw and nut are not included, extra thin probe tip leaves a smaller puncture....
  • To monitor the meat temperature or ambient temperature (smoker/grill), This probe works very well on smokers....
  • > Guarantee and Service: The probe sensor Replacement Part completed with a One-year Warranty. Save much money off dealer prices. If the probe once....
Check Stock

Replacement Meat Probe of Weber iGrill Mini iGrill 2 iGrill 3 Thermometer 2 Pack High Accuracy Grill Probe Fit for Weber iGrill App-Connected with 2 Probe Clip Holder

  • HIGH ACCURACY & WIDE TEMPERATURE RANGE - Insert the igrill probe directly into the meat to monitor the core temperature of the meat, measures range....
  • SIMPLER GRILLING - Ccurate temps out of the box! Work perfectly fit for Weber iGrill. Use this temp probe and connect to the app to monitor your....
  • MONITOR MULTIPLE DISHES - Mini meat probe for grilling has 2 different color sleeve, this is no more guesswork when monitoring multiple different....
  • NEARLY PERFECT MEAT PROBE - Compatible with Weber iGrill/iGrill 2/iGrill 3/iGrill Pro. 6.3 "food grade probe and 47" woven steel meshprobe wire, to....
  • YOUR SATISFACTION, MOST IMPORTANT - Package comprises two temperature probe, and two stainless steel probes clips. Pro meat probe can not only help....
Check Stock

YIYIBYUS Precision Two-Dimensional Measuring Ruler General Automobile Body Frame 2D Measurement Maintenance Tool Measurement System is Easy to Operate

  • ... testing and measurement in accident vehicle maintenance. It can also be widely used in construction, mechanical maintenance and other fields. It is an aluminum telescopic measuring device..
  • 【NOTE】Do not touch heavy objects. Do not touch corrosive substances such as fire, rubber water, asphalt, etc. The magnetic probe of the digital calipers is tilted after use. Do not pull it out vertically to avoid injury..
  • 【MEASUREMENT TOOL KIT】Includes 20-150mm scale, 20-340mm scale, threaded probe, magnetic probe, magnetic probe and extended base, 3D adapter, large positioning probe, longitudinal positioning probe, small positioning probe, size nut probe, English manual..
Check Stock

GRILLME Replacement High-Temperature Meat BBQ Probe for Camp Chef NTC Pellet Grills

  • For use with all meats, great replacement probe and/or additional probe.
  • High-Temperature Meat BBQ Probe, Replacement for Camp Chef Pellet Grills.
  • Monitor the meat temperature or ambient temperature (smoker/grill).
  • The tip of the probe tube can be run under a tap or cleaned with a damp rag.
  • The probe can be used for either BBQ or food..
Check Stock

Care Touch CTPC100 Disposable Universal Probe Covers Shape Pack of 100

  • VALUE PACK- You receive 100 thermometer probe covers in each box.
  • SANITARY - Keep your thermometer clean by using these probe covers.
  • UNIVERSAL - Fits most thermometers snugly to ensure that it stays in place while taking temperature.
  • DURABLE - Probe covers are made from a durable plastic so that is doesn't tear or rip during use.
  • SIMPLE TO USE - Just insert the thermometer probe into the sheath package. Holding the probe and tab of the sheath as shown, pull away the sheath....
Check Stock

2-Pack Meat Probe Thermometer Replacement for RecTeq RT-B380 Bullseye/RT-590/RT-700 Wood Pellet Grill Rec Tec BBQ Accessories

  • 【Meat Probe】Read the temperature using the digital, WiFi controls with Rec Tec Wood Pellet Grill Meat Probe.
  • 【Compatible with】RT-B380 Bullseye Wood Pellet Grill,RT-700, RT-590, RT-340, RT-1070, RT-1250, RT-2500 BFG, RT-CMG Beast, RT-TMG Chuckwagon.
  • 【Take Care】DO NOT compatible with other brand Traeger/Pit Boss/Camp Chef wood pellet grill /.
  • 【Includes】2 x Recteq Meat Thermometer Probe /Food Probe.
  • 【Easy Use】Add up to meat probe thermometers to your RecTeq grill. Each probe will give a reading to the digital,WiFi controls to allow you to....
Check Stock

Official ThermoPro Stainless Steel Probe Replacement Stainless Meat Probe for TP06S TP07 TP610 TP16 TP16S

  • Cable length: 40" stainless steel mesh cable.
  • Probe wire can withstand up to 716˚F (380˚C).
  • Replacement temperature probe for TP610, TP-06S, TP-07B, TP-16, TP-16S, TP-08 (food probe).
Check Stock