Top Linear Slide Way

Linear Stages, SEMY100-AS XY axis Manual Fine-Tuning Cross Roller Precision Linear Stages 10010040mm

  • [High quality]: This linear grade is made of high quality aluminium alloy material. It is light in weight and durable. Not easy to damage and rust, reliable quality, long service life.
  • [Convenient] :XY linear stage, light weight, small size, other equipment easy to install, easy to use.
  • [Good performance] XY linear slide has exquisite workmanship, low friction coefficient and strong versatility.
  • [Practical]: High-precision linear stage has high practicability because of its smooth surface, linear motion can be maintained and friction resistance is smal.
  • [Application]: The two-axis positioning table is widely used in machine tools, automation equipment, optical equipment and so on.
Check Stock

DC 5V-9V 12V 2 Phase 4 Wire Stepper Motor Linear Rail 90mm Stroke Lead Screw Linear Stage Actuator with Nut Slider Step Angle 18 Degree for DIY Laser Engraving Machine

  • 【All metal】 The linear screw adopts an all-metal structure, with fine workmanship, stable performance and high work efficiency, and is an essential part of linear motion..
  • 【Size】 Screw length: about 45mm/1.8inch, screw diameter: about 3mm/0.1inch, pitch: about 0.5mm/0.02in (moving in one step is 0.025mm, if smaller, you can use a subdivision driver)..
  • 【2-phase 4-wire stepper motor】 With a miniature 2-phase 4-wire stepping motor, the slider stroke is about 34 mm/1.3 inches, and the motor diameter is about 20 mm/0.8 inches. The driving voltage of the motor is 5-9V/200-600mA (the higher the voltage, the greater the force Larger, the greater the calorific value)..
  • 【Easy to use】 The micro stepping motor slide table can drive the accurate diagonal to move the metal slide up and down..
  • 【Application】 Stepper motor guide linear slide table can be used for DIY small slider/project/measurement equipment/laser printer, etc..
Check Stock

8 Inch Ball Screw Actuator, Linear Motion Actuators with Handwheel Manual Sliding Table CNC Linear Guide Stage Linear Motion Slide Rails Linear Bearings and Rails 200mm Stroke

  • Dimension: 8x400mm linear rail motion shaft guide set.
  • The linear rail made of good quality steel and aluminum alloy.
  • It can move smoothly without deflection minimal wear and low noise, because the high accuracy and strong durability.
  • The linear rails apply for large-scale transmission equipment including industrial robots, cracker machines, supersonic cleaning equipments, solar energy and clothing supporting devices, etc.
  • Package Content: 2Pcs Linear Shaft Optical Axis 8x400mm + 4Pcs Linear Rail Shaft Guide Support SK8 + 2Pcs SCS8UU Linear Motion Ball Bearing Slide Bushing.
Check Stock

Joomen CNC SBR16 Support Rail RM1605 ballscrew 600mm Linear Motion Kit

  • Smaller and lighter solution of linear motion guide for multiple DIY machine projects, 3D printers, equipments and other small size linear devices..
  • Smooth movement, low friction, easily maintained and carried..
  • Same model with more sizes are provided..
  • Package includes 2 mini linear rails MGN12 and 2 slide units MGN12H..
Check Stock

SIMAX3D MGN12H 350mm Linear Rail Guide 2pcs MGN12 Linear Slide 8mm for 3D Printer and CNC Machine Upgrade (2pcs/Pack)

  • Package Include: MGN12H 350MM Linear Rail Guide *2PCS.
  • Each MGN12 350MM is fully oiled and packed individually..
  • SIMAX3D MGN12 Linear Rail Guide 350MM is made of heavy-duty bearing steel, which is more durable than other bearings, high stiffness, high precision, smooth running and low noise..
  • Linear Rails 350MM is widely used in industrial robots and CNC and other large.
  • MGN12H Linear Slide 350MM Note: Please use M3 T nut and screw to fix the linear rail for 20 series EU Al-profile..
Check Stock

Leviton TSL06-1LT Toggle Slide Universal Dimmer, 300W Dimmable LED & CFL, 600W Incandescent & Halogen For Single Pole Or 3-Way, with Locator Light, Almond

  • Classic design with toggle switch and integrated linear Full Range slide control for easy, precise operation.
  • Designed specifically for dimmable LED and CFL bulbs.
  • also compatible with incandescent and halogen bulbs.
  • Single pole or 3 way capable when used with a 3 way switch.
  • Built in starting technology for CFL bulbs.
  • Allows users to modify dimming range to optimize low light level performance when required (optional).
  • Wider dimming range for LED and CFL bulbs than traditional incandescent dimmers.
Check Stock

Yeahmart Linear Rail 2 Pcs 8mm x 400mm Cylinder Liner Rail Linear Shaft Optical Axis + 4 Pcs Rod Rail Shaft Support SK8 + 2Pcs Linear Motion Ball Bearing Slide Bushing SCS8UU

  • Dimension: 8x400mm linear rail motion shaft guide set.
  • The linear rail made of good quality steel and aluminum alloy.
  • It can move smoothly without deflection minimal wear and low noise, because the high accuracy and strong durability.
  • The linear rails apply for large-scale transmission equipment including industrial robots, cracker machines, supersonic cleaning equipments, solar energy and clothing supporting devices, etc.
  • Package Content: 2Pcs Linear Shaft Optical Axis 8x400mm + 4Pcs Linear Rail Shaft Guide Support SK8 + 2Pcs SCS8UU Linear Motion Ball Bearing Slide Bushing.
Check Stock

Linear Motion Slide Rails, Saim Aluminum DIN Mounting Rail, Length 250mm/9.8inch,Width 35mm/1.38inch, Slotted Design, 10 Pcs

  • [CHARACTERISTIC] - This linear rail and block are small in size and lightweight, especially suitable for small equipments..
  • [PORTABLE] - The linear motion rail adopting 4-point contact design, it can bear load from every direction, and has good strength and high accuracy..
  • [ADVANTAGE] - Block has lubrication system.
  • lubrication oil can be easily put into the oil inlet on the side..
  • [APPLY TO] - The linear slide rail is widely used for automatic equipment, precision measuring equipment, and many other machines that need precision linear movement..
Check Stock

BIQU 400mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler + Pillow Bearing Block for 3D Printer

  • ✅【Simple Introduction:】4080U Aluminum Profile Worktable T8 Screw Linear Slide Table with Flexible coupling D20 L25 8mm to 6.35mm, Lead is 8mm ( The lead screw moves 8mm in one turn), Color is balck, Provide length: 200mm/250mm/300mm/350mm/400mm/450mm/500mm..
  • ✅【4080U Type 400mm Size:】Overall length: 449mm, Length of aluminum section: 400mm, Effective stroke: 400mm-77.15mm=322.85mm, T-type screw length: 440mm. ⚠️ (Please allow slight errors on size due to manual measurement.).
  • ✅【Wide Range of Uses:】CNC sliding table is mainly used for equipment such as cutting machine, DIY CNC router, lasser machine, lasser printer, 3D printer, small CNC machine tools and other equipment..
  • ✅【Good Performance:】This 3D printer accessories have stable performance and high work efficiency. They are an indispensable part of linear motion..
  • ✅【Product Description:】This table linear actuator kit is made of high quality metal, combined with the unique linear rail and the end mounts and gantry plate, plus other v-slot components, which is an essential part of linear motion. It is a simple linear actuator but with fine workmanship, stable performance and high work efficiency..
Check Stock

MGN12 400mm Linear Rail Guide with Mini MGN12H Linear Block Carriage Miniature Linear Motion Guide Way

  • Slide is attached and can slide smoothly. Mini Petite, convenient to put in and out.
  • There are are 2 anti-fall strips on each side of the block, which reduce the situation that the carriage block is stuck during shipping, and makes it lower noise when the carriage block is running on the guide rail..
  • Application to CNC parts, 3d printer parts, semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robot arms, and other small linear motion machines, linear motion measurement equipment.
  • .If you need special length, feel free to ask us.
Check Stock

Twotrees Linear Motion Guide 10mm x 350mm (0.393 x 13.78 inches) Case Hardened Chrome Plated Linear Motion Rod Shaft Guide - Metric h8 Tolerance (2 pcs)

  • The material is carbon steel, which is very suitable for linear motion rod..
  • The surface has been chrome plated to enhance the hardness..
  • Chamfer on both ends, easier to install linear bearings and won't hurt fingers when installing it..
  • Round steel shaft for use with linear support blocks and closed type slide units in linear motion applications.
  • Diameter 10mm, tolerance -0.005mm to -0.03mm ( 9.995mm - 9.97mm), length 350mm, tolerance ± 0.5mm ( 349.5mm - 350.5mm )..
Check Stock

2PCS SBR16 Linear Rail Set Included 2Pcs Linear Motion Guides with Linear Bearings 2000mm(79’’) and 4Pcs SBR16UU Blocks for Automated Machines and Equipments

  • 【Packaged】Included 2PCS SBR16 linear rail with bearings 2000mm(79’’) Length and 4PCS SBR16UU blocks. Rail shaft diameter is 16mm(0.63’’)..
  • 【Material】Made of premium carbon steel rail shaft and aluminum alloy support. Rust-resistance,more durable for use..
  • 【High Precision Making】Compared with other linear bearing,our linear bearing is more smooth and no burr on surface with precision treatment.The bearing blocks is accurately fit to the linear bearing,slide smooth and stable..
  • 【Application】Make good performance for automation machine,such as DIY CNC routers, lathes, machine tools, bending machines, laser welding machines, etc. Also applicable for large-scale transmission equipment..
  • 【5 Stars Customer Services】Any problems about our linear rail ,our professional team will help you solve it in the first time after you contact us..
Check Stock