Top Liquid Level Gauges

Winters PFQ Series Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 0-60 psi, 2-1/2\ Dial Display, +/-1.5% Accuracy, 1/4\ NPT Bottom Mount

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-5000 psi/kpa,2-1/2\ Dial Display, +/-1.5% Accuracy, 1/4\ NPT Bottom Mount

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

YZM Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 2-1/2\ Dial Display, -1.5% Accuracy, 1/4\ NPT Bottom Mount,Water Pressure Gauge. (0-150 psi)

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

Taidacent Non-Contact Liquid Level Sensor Externally Attached Liquid Induction Level Switch Water Level Switch (NPN Output(5-12V))

  • The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container..
  • The liquid level sensor has intelligent liquid level reference adjustment and liquid level memory function, liquid level status display mode, which can realize multi-point series connection.
  • can support high and low level output, NPN, PNP signal output and RS485 communication interface output.
  • Open collector output mode, wide voltage range (5~24V), suitable for connecting various circuits and product applications(Please Choose the appropriate model for your usage)..
  • High stability, high sensitivity, strong interference capability, free from external electromagnetic interference, special treatment for power frequency interference and common mode interference, to be compatible with all 5~24V power adapters on the market..
  • Strong compatibility, through a variety of non-metallic containers, such as plastic, glass, ceramics and other containers, the sensing distance can reach 20mm.
  • liquid, powder, particles can be detected..
  • Open collector output mode, wide voltage range (5~24....
Check Stock

Winters PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 0-300 psi/kpa,2-1/2\ Dial Display, +/-1.5% Accuracy, 1/4\ NPT Center Back Mount

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

Taidacent Non Contact Liquid Level Sensor Contactless Water Level Sensor Externally Attached Pipe Water Float Switch NPN Output Capacitive

  • The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container..
  • The liquid level sensor (probe) is installed above and below the outer wall of the container to be tested (the high and low positions of the liquid level). The non-metallic container does not need to be opened, and the installation is simple and does not affect the production..
  • The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected..
  • The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used..
  • NPN output: If there is induction, the output is low level.
Check Stock

Winters Instruments - PFQ801 -801 PFQ Series Stainless Steel 304 Dual Scale Liquid Filled Pressure Gauge with Brass Internals, 30\Hg Vacuum/kpa, 2-1/2\ Dial Display, +/-1.5% Accuracy, 1/4\ NPT Bottom Mount

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

PacTool SA902 Gecko Gauge Siding Mounting Kit For 5/16-Inch Fiber Cement Siding Installation

  • PRO GRIP CLAMP: Ideal for one-person installation this siding mounting block gauges and support the next course for nailing, with virtually no layout....
  • SIDING TOOLS: Slide it, lock it, nail it.
  • These hands-free clips are designed to hold the board at the correct height and help install fiber cement....
  • MOUNTING BLOCK: Our gauges can be adjusted for 5”, 6”, 7” and 8” siding reveals, and the patented Friction-Cam mechanism supports full 12'....
  • PROFESSIONAL EQUIPMENT: Take your siding project to the next level with our heavy-duty contractor-grade aluminum house siding tool.
  • PACTOOL:Trusted for decades, we are the leaders in specialized construction, renovation, and remodeling designs.
Check Stock

Ashcroft - 351132FD25SXCYLM100IWD - Gauge, Differential

  • Differential Pressure Gauges for Air or Noncorrosive Liquid Ashcroft Accuracy: ±2% full scale 1/4.
Check Stock

Winters Instruments - PFQ807R1 -807R1 PFQ Series Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 0-300 psi, 2-1/2\ Dial Display, +/-1.5% Accuracy, 1/4\ NPT Bottom Mount

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

Winters Instruments - PFQ804R1 -804R1 PFQ Series Stainless Steel 304 Single Scale Liquid Filled Pressure Gauge with Brass Internals, 0-100 psi, 2-1/2\ Dial Display, +/-1.5% Accuracy, 1/4\ NPT Bottom Mount

  • Brass wetted parts for measuring non-corrosive liquid and gas pressure.
  • Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
  • Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
  • Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
  • Lower mount or center back male connection with 1/8.
Check Stock

Taidacent Non Contact Liquid Level Sensor Contactless Water Tank Water Level Sensor for Tank Water Level Control with Low and High Level Output

  • The intelligent non-contact liquid level sensor uses advanced signal processing technology and high-speed signal processing chip to break through the influence of the wall thickness of the container and realize the true non-contact detection of the liquid level in the closed container..
  • The liquid level of various toxic substances, strong acids, strong alkalis and various liquids in the high-pressure closed container can be detected..
  • The liquid to be tested is required to be electrically conductive, the contact surface is non-metal, and the pipe is easy to install and can be widely used..
  • High and low level output: If there is induction, the output is high level.
  • no induction, the output is low level. Specially designed for non-metallic pipe liquid level detection.
  • You can adjust sensitivity: Remove the plastic cover of the sensors and turn the very small screw, clockwise decrease sensitivity, counter clockwise to increase the sensitivity..
Check Stock