Top Liquid Weld

Bondic GO UV Glue Kit with Light, Super Glue, Liquid Plastic Welding Kit, (3ml) Adhesive Epoxy UV Glue, Bonds & Cures Instantly, Non-Toxic UV Resin Glue, Heat-Resistant & Waterproof, 2PK

  • FIX VIRTUALLY ANYTHING IN 4 SECONDS. Our UV welding glue kit allows you to bond any plastic, fabric, metal, rubber and wood materials together. Simply place the liquid plastic wherever it’s needed and it hardens in just 4 seconds once exposed to the included UV light..
  • STAYS LIQUID UNTIL YOU DECIDE TO SET IT. Bondic is a liquid plastic welder that stays liquid until you cure it with the included UV light. This means you can mold and shape the material before setting to bond, fill and weld in ways that regular glue simply can’t achieve..
  • AVOID THE HASSLES OF ORDINARY GLUE. Tired of ordinary super-glue drying out in the container or sticking to your fingers and clothes? Luckily Bondic’s plastic repair kit stays liquid until cured by UV light, meaning it will never dry out in the container or adhere to any material until you decide it’s time..
  • INCREDIBLY DURABLE ADHESIVE. When fully cured, Bondic’s non-toxic adhesive epoxy is 100% waterproof, heat-resistant and dries clear. You can even sand and/or paint over it after it’s hardened!.
  • EVERYTHING YOU NEED FOR RESCUE REPAIRS. Our Bondic Go 2-pack kit comes with everything you need for on-the-go repairs. A compact ultraviolet light is included along with a convenient travel case that houses the....
Check Stock

Brass Inverted Flare Fitting Tube Nut, Brake Line Plug, 5/16\ OD, 5pcs

  • Tube nut for use with inverted flared tubing.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • For use with liquid petroleum (LP) and natural gas, refrigeration, hydraulic brake, trans-mission cooler lines, fuel, oil, air, lines, power steering..
  • Not for use in potable drinking water applications.
  • Working pressure up to 2000psi depending on Tube (O.D),Will withstand burst pressure 5000psi with bundy-weld..
Check Stock

J-B Weld 8272 MarineWeld Marine Epoxy - 2 oz.

  • J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and watercraft repairs..
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be tapped, filled, sanded, molded and drilled. J-B Weld MarineWeld’s set and cure color is dark grey..
  • VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, MarineWeld is waterproof and resistant to petroleum, chemical and acid. It retains strength above & below water..
  • SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Check Stock

Plast-aid Multipurpose Repair Plastic - 6 oz Kit

  • J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and....
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be....
  • VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
  • SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
Check Stock

J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz.

  • JB WELD: Is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Perfect for household, automotive, marine and craft uses..
  • THE ORIGINAL COLD WELD: JB Weld was developed as an alternative to torch welding. Designed to be effective in extreme environments, once it sets, it creates a permanent bond stronger than steel..
  • EASY TO USE: Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color..
  • VERSATILE & DEPENDABLE: J-B Weld has a tensile strength of 3960 PSI & sets overnight. It can withstand temperatures up to 550ºF when cured. Great for use on brick, concrete, metal, fiberglass & more..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World’s Strongest Bond..
Check Stock

Walter Surface Technologies 53F605 E-Weld Plasma Protection Liquid (10 Kg) - Ceramic Fluid for Plasma Cutting Tables. Anti-Spatter Solution

  • Anti-Spatter Liquid: ceramic anti-spatter solution can be safely applied to cutting tables to reduce the buildup of slag over time. It also decreases the amount of time and effort required in cleaning the slag off the tables.
  • Functions: prevent the creation of uneven cutting surfaces with this plasma solution. It also helps in increasing the lifespan of the equipment it is applied on.
  • Efficiency: it serves as a preventive measure in keeping the slag from adhering to slats of cutting tables. This protective solution decreases the time, efforts, and costs required in equipment maintenance and helps generating revenues.
  • Usage: use anti-spatter liquid with easy-to-use E-weld arm-mounted sprayer that applies a thin layer over the surface to prevent any wastage. The anti-spatter liquid is available in a 10 kg container, which is enough to cover 50-100 square meters.
Check Stock

J-B Weld 50101 MinuteWeld Instant-Setting Epoxy Syringe - Dries Clear - 25ml 2

  • J-B WELD ORIGINAL PRO SIZE: Professional 5 OZ Tubes of the Original Cold Weld two-part epoxy system that was designed as an alternative to torch....
  • CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured J-B Weld Original can be....
  • VERSATILE AND DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
  • SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
Check Stock

Bondic Pro UV Resin Kit Liquid Plastic Welding Kit Super Glue Plastic Repair for Home Jewelry Glue Adhesive Epoxy Ultraviolet UV Glue for Glass Light

  • INSTANTLY BOND VARIOUS MATERIALS. Our UV resin glue kit empowers you to easily bond plastic, fabric, metal, rubber, and wood materials together in mere seconds..
  • VERSATILE LIQUID PLASTIC WELDER. Bondic stays in liquid form until cured with the included UV LED light, allowing for molding and shaping of the material before setting to bond, fill and weld in ways traditional glue cannot..
  • SAY GOODBYE TO GLUE PROBLEMS. Tired of dealing with traditional super glue drying out or sticking to your skin and clothes? Bondic's UV plastic repair kit stays liquid until cured by UV light, eliminating the risk of drying out in the container or welding your fingers together..
  • EXTREMELY DURABLE ADHESIVE. Once cured, Bondic's non-toxic adhesive epoxy is 100% waterproof, heat-resistant and dries clear. It can even be sanded and painted over for a seamless finish..
  • TAKE IT WITH YOU ANYWHERe. Bondic's epoxy resin kit includes 3 tubes of UV resin glue, a compact UV LED light, cleaning cloth and a convenient travel case, making it easy to fix virtually anything while on-the-go..
Check Stock

J-B Weld Plastic Bonder Black 25ml Syringe - 2 Pack (50139-2), 25 ml - 2 Pack

  • J-B Weld Plasticbonder (Black): A Quick Setting And Multipurpose Two Part Urethane Adhesive & Gap Filling System That Provides A Strong And Lasting Bond To Many Plastic Surfaces J-B Weld Plasticbonder Is Great For Diy Plastic Repairs, Filling Dents, Bumper Repairs And More. J-B Weld Plasticbonder comes in Syringe allowing for a 1: 1 Mix Ratio. The Unique Syringe Has A Re-Sealable Cap That Prevents Drying Out And Leaking, Allowing For Multiple Uses.
  • Cure And Set Time: After Mixing The Two Part Formula With The Included Mixing Tray And Stir Stick, Plasticbonder Takes 15 Minutes To Set And 30 Hours To Cure J-B Weld Plasticbonder Set And Cure Color Is Black..
  • Strength: J-B Weld Plasticbonder Has Tensile Strength Of 3770 PSI..
  • Surface Applications: Thermoset & Carbon Fiber Composites, Thermoplastics And Coated Metals, Plastic & Pvc, Concrete, Ceramic & Tile, Fiberglass, And Aluminum.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, ....
Check Stock

PC Products PC-7 Epoxy Adhesive Paste, Two-Part Heavy Duty, 2oz in Two Jars, Charcoal Gray 27776

  • J-B WELD MINUTEWELD: A stronger and more permanent substitute to Super Glue J-B Weld MinuteWeld is an instant setting two part epoxy that will set in 1 minute under most temperature conditions J-B Weld MinuteWeld comes in a syringe allowing for an easy 1: 1 mix ratio The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses.
  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, MinuteWeld takes 1 minute to set and 1 hour to cure J-B Weld MinuteWeld set and cure color is clear.
  • STRENGTH: J-B Weld MinuteWeld has tensile strength of 2300 PSI.
  • SURFACE APPLICATIONS: Ceramic & Tile, Fiberglass, Plastic & PVC, Wood, Concrete, and Glass.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld Our heavy duty epoxy and adhesives repair & restore it right the first time J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond.
Check Stock

Powerbuilt All-in-One Unijack Pinch Weld Saddle Adapter, Protect Vehicle Frame, Car Lift - 240337

  • LIFT MORE: Adds Pinch Weld application to all Unijacks and All-in-One Jacks. Now lift right on the pinch weld point with these jacks without worry of damaging or bending the pinch welds in the frame..
  • EASY: Simply slide the pinch weld adapter onto the existing saddle riser of the All-in-One or Unijacks..
  • UNIVERSAL FIT: The Pinch Weld Adapter fits all Unijacks and All-in-One Jacks on the market. 640912, 620470 & 620471..
  • SAFER: The Pinch Weld adapter not only protects the frame of the vehicle from damage, but also also for more secure contact with the vehicle and will the wide platform straddling both sides of the pinch weld your vehicle will be more stable during lifting..
Check Stock

Weld on Filler Cap, KIMISS Aluminum Alloy Weld On Oil Tank Filler Neck with Cap Filler Neck 1.5'' 1 1/2'' OD for Fuel Tanks Weld In Fuel Cell Cap Weld On Fuel Cap Fuel Filler Neck Aluminum Fill Cap

  • Scope of application: Weld On Billet Caps Aluminium Weld on Filler Neck does not need to be replaced frequently, with strong practical and durable. The filled neck with cover is suitable for oil tank, fuel tank, water tank, dry tank, etc. It is a high-quality, quality-guaranteed auto parts, and Fuel Filler Neck And Cap is your best purchase choice..
  • Product function: Weld On Fill Cap Fuel Filler Neck has smooth finished design, come with a O-shaped sealing ring and a natural aluminium screw on cap. Weld on Cap meets aviation hose fitting requirements, precision m....
Check Stock