Top Lithium Hydride

FPVERA Battery 3.7V 500mAh Lithium Rechargeable: 3PCS 3.7Volt Batteries for RC Quadcopter Drone E58 S168 JY019 L800 Battery Pack with 3 in 1 USB Charger

  • 3.7V 500mAh rechargeable Lithium battery: voltage3.7V,capacity:500mAh,batterySizeL68*12*25mm/2.68*0.47*0.98inch,,weight:18g/0.66oz,Lightweight and portable battery pack suitable for RC Quadcopter Drone E58 S168 JY019 L800.
  • 3.7V Lithium rechargeable battery with USB charging cable: Everywhere You will Charge It- You can charge the battery on power bank, vehicl power, computer,charger cable are great for MOST of the 3.7v batteries but not all. Check the printed limits on the chargers of different toys so the numbers match the charger that came with the toy.
  • Replacement battery for 3.7V 500mAh: When your original battery is damaged or old, it can be a good replacement. You can also use it as a spare battery, when you play the toys, which allows you to enjoy longer action time(Please make sure your device battery is the same size and connector as the picture shows before you buy it).
  • Lithium Battery No memory effect: Our nickel metal hydride battery pack has no memory effect which helps retain its max energy capacity every time,Easy to operate,Recharge anytime without needing to discharge and drain the battery.
  • Warranty and Guarantee: All of our products have been rigorously tested before leaving the factory,We provide 100% satisfied customer service, i....
Check Stock

Vehpro MPPT 40A-100A 12V/24V Auto Focus Tracking Solar Panel Regulator Dual USB Port Charge Controller 100A

  • ✔️ --- NOTE: The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL. It is NOT suited for nickel metal hydride, lithium ions or....
  • ✔️ --- MPPT solar charge controller MPPT10-60: Compared with normal solar charge controller, this MPPT controller could increase efficiency by....
  • ✔️ --- When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to....
  • ✔️ --- This MPPT controller has perfect SOC function, control charge current, and supply power to the loads.Prevent the battery from over-charging....
  • ✔️ --- Any problem please contact with us , we will try our best to solve your problem and make you satisfied within 24 hours..
Check Stock

EBC-A40L Battery Tester Electronic Load 0.1-40A Large Current Lithium Battery Charge Dischage Capacity Tester, 0-5V Fe Battery Cyclic Tester

  • ...ance test of various batteries, mobile power supply discharge test, charging head power performance test, supports connecting to a computer, and realizes more extended functions through online software..
  • 【Automatic Test】The charging method is standard charging, and supports nickel-metal hydride, nickel-chromium, lithium, iron-lithium, and lead-acid. Support automatic charge-discharge-charge mode to test battery capacity. LCD display: voltage, current, capacity, time, power, energy test data..
  • 【Excellent Performance】This EBC-A40L battery capacity tester is designed for high current charge and discharge within 5V, it supports a maximum charge current of 40A and discharge of 40A. It can be connected with a computer via a specified USB-TTL cable..
  • 【Capacity Measurement】 Within 10Ah, the resolution is 0.001Ah.
  • Above 100Ah, the resolution is 0.1Ah. (Package includes: 1 x Battery Tester, 1 x In-Line Cable, 1 x Test Cable, 1 x Power Cord.).
Check Stock

Spot Welder with Soldering Iron, 11000mAh Soldering Iron Kit Electronics, Adjustable Temperature Welding Tool, Portable Spot Welding Equipment for DIY 18650 Battery, Soldering Iron Stand

  • ✔Multifunctional 2-in-1: Professional welding machine + soldering iron two-in-one function, easy to carry..
  • ✔Multi-purpose - The spot welder can be used to spot weld cylindrical lithium batteries, nickel-metal hydride batteries and 18650/26650/32650 batteries such as cadmium-nickel batteries, and our mobile phone batteries can also be spot welded..
  • ✔Adjustable Gears - The spot welding machine has 6 gears that can be adjusted. Different gears are used for different materials. The spot welding materials can be nickel, iron, stainless steel, aluminum, etc. 0.1-0.2 mm in thickness material..
  • ✔Large Capacity - The spot welder has a large capacity of 11000 mAh, built-in rechargeable 2 electric power lithium batteries, discharge current 003e650A, environmentally friendly. Type-C 2A input, it can be fully charged in about 3 hours. We can also use it to charge our other devices..
  • ✔Protection Measures - The portable spot welder with soldering iron has perfect overcharge and over temperature protection functions. Its unique overheating protection device automatically cuts off the power when overheating occurs, and it will automatically shut down without any operation for 8 minutes, allowing you to use it more safely..
  • ✔Beautiful design: The output temper....
Check Stock

Portable Spot Welder, USB-Charging Upgraded Mini Spot Welder, Adjustable Gears Spot Welding Machine, Battery Spot Welder with Welding Pen, 5M Nickel Sheet, Type-C Fast Charging DIY 18650 Spot Welder

  • ✔Multi-purpose - The spot welder can be used to spot weld cylindrical lithium batteries, nickel-metal hydride batteries and 18650/26650/32650 batteries such as cadmium-nickel batteries, and our mobile phone batteries can also be spot welded..
  • ✔Adjustable Gears - The spot welding machine has 6 gears that can be adjusted. Different gears are used for different materials. The spot welding materials can be nickel, iron, stainless steel, aluminum, etc. 0.1-0.2 mm in thickness material..
  • ✔Large Capacity - The spot welder has a large capacity of 7500 mAh, built-in rechargeable 2 electric power lithium batteries, discharge current >650A, environmentally friendly. Type-C 2A input, it can be fully charged in about 3 hours. We can also use it to charge our other devices..
  • ✔Welding Pen - The terminal of the welding pen is gold-plated, which can pass a higher current. The 7mm spot welding special red copper has ultra-low resistance and anti-oxidation. The welding pen has a length of 40cm/16 inches, which is flexible and convenient for us to use..
  • ✔Protection Measures - The portable....
Check Stock

Tenergy 2 Pack 8.4V Airsoft Battery 1600mAh NiMH Nunchuck Battery w/Mini Tamiya Connector High Discharge Rate Stick Shape Butterfly Battery for Airsoft

  • ..., allowing you to stay in the game longer.
  • Two connection choices - The cable type of 11.1v mini airsoft battery is T-plug(Deans), in addition you will also get a T-plug(Deans) to Tamiya cable, which provides you with more options for easy use in aeG, AK47, M4A1, MP5 and other model pistol rifles.
  • Rarely expandable - Lithium Ion nunchuck battery is different from Lipo battery, which is greatly affected by the environment and easy to expand and aging over time. Lithium battery has a more stable chemical composition, allowing you to play more safely while using it.
  • No memorability - 3100mAh tactical batteries have no battery memory effect, so you don't worry about the capacity will get less and less. Unlike nickel-hydride batteries or nickel-cadmium batteries, if they are not fully charged and discharged for a long time, there won't be traces in the battery and won't reduce the battery capacity.
  • Warm prompt - Please pay attention to correctly connect the positive and negative terminals of the battery when using, do not use it in extreme environment. If you receive the battery and have any questions of the battery or usage, please contact us immediately, we will give you a solution within 24 hours.
Check Stock

Woltechz B6 Lipo Charger Balance Charger Discharger 1S-6S Digital LCD RC Battery Charger for LiPo LiHV Life Li-ion NiCD NiMH PB Smart Battery with Power Supply

  • B6 balance charger/discharger is ideal for all hobby 6S(22.2v) battery packs that are NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs..
  • Made of high-quality chips and materials to provide you with high-quality products and function performance, and the charger also has short-circuit....
  • Microprocessor controll Delta-peak sensitivity.
  • Li-ion and LiPO balancing, fast charging, data storage, cyclic charging, discharging, and much more....
  • Compatible with battery packs with voltages that ranges from 6 to 12 for nickel metal hydride or nickel–cadmium battery packs and Lithium-ion....
  • LCD display lipo battery charger,you could view all charging status and settings on the charger LCD screen when you browse the mode and selection,....
Check Stock

Energizer 40AA Ultimate Lithium Long Lasting Leakproof Batteries

  • 【Basic parameters】— 12-pack of Bevigor lithium 3000mAh 1.5V with light weight（15g/1pc）life-span(10 years) AA batteries, perfect to power your electronic devices, remote controls and other household appliances. Bevigor provide extremely perfect packaging and strong storage time. Prevent accidental drop or short circuit, and provide more secure protection for the battery. 10-year battery storage life for long-term backup energy..
  • 【More safety &Leak-proof】—Three-layer safety and leak-proof design. Explosion-proof valve, anti-short-circuit valve, leak-proof sealing ring. And use of spiral wound battery technology can effectively prevent liquid from battery to leaking or damage the device (based on standard usage). Is the best choice for high-end electronic products..
  • 【Wide adaptable temperature】—Performs perfectly in extreme environments . Cold resistance surpasses alkaline batteries and nickel-metal hydride batteries. Works well from -40F to 140 ° F and is suitable for both outdoor and indoor use..
  • 【Wide application】—Perfect for both high and low drain devices, such as digital cameras, vr controllers, 4WD speed RC car toys, LED flashlight clocks, emergency lantern, LED candle,portable radio, cassette recorder, solar lights....
Check Stock

DROK DC 24V to 12V CC CV Step Down Volts Regulator Constant Current Voltage 8A DC Adjustable Buck Converter 7-40V to 1.2-35V LED Driver Charger Module with Charging Indicator Solar Power Supply DIY

  • Module Properties: non-isolated step-down constant current , constant voltage module (CC CV) charging module.
  • Output voltage :DC 1.2-35V continuously adjustable.
  • Output Current: 8A ( when power tube's temperature exceeds 65 degrees, please add cooling fan ).
  • Constant current range :0.2-8A ( adjustable ).
  • Input 24V Output 12V 5A ripple around 50mV ( excluding noise ).
  • Application: High-power LED constant current driver, rechargeable lithium batteries (including ferroelectric), 4V, 6V, 12V, 14V, 24V rechargeable batteries, nickel-cadmium nickel-metal hydride batteries (battery pack) charging, solar panels, wind turbines.
Check Stock

Haisito Lipo Charger HB6 RC Battery Balance Charger Lipo Battery Charger Discharger for LiPo/Li-ion/Life Battery(1-6s) NiMH/NiCd (1-15s) RC Hobby Battery Balance Charger 80W 6A

  • ...batteries such as 1.2V-18V NiMH/NiCD batteries (1-15 Cells), 3.7V-22.2V LiPo/Li-ion batteries (1-6 Cells), 3.2V-19.2V LiFePO4 batteries (1-6 Cells), and 2V-20V SLA batteries.Note: Do not choose the wrong type of battery when charging..
  • ❤【Multiple Practical Functions】-The lipo charger is built in an independent Lithium Battery Balancer to monitor and balance each battery cell, and it has Fast & Storage Charging function, Data Storage & Load function, Cyclic Charging & Discharging function,security for nickel metal hydride or nickel–cadmium battery packs and Lithium-ion battery packs..
  • ❤【Easy To Operate】-View all charging statuses and settings on the electronic balance charger LCD screen as you navigate the modes and selections. Follow the instructions and you will find it so easy to operate. Connect the battery and charger, select the mode, and start charging..
  • ❤【High Quality & Safe】-Using superior chip and materials to deliver quality performance, and the charger is designed with Reverse Polarity Protection, Short Circuit Protection, Over-Charge Protection, Over-Current Protection and Over-Temperature Protection for safety.The charger shell is made of high-quality fireproof materials and has passed the experimental certification, so ....
Check Stock

Spot Welder Kerpu Mini Spot Welder Portable Spot Welder Machine Spot Welding Equipment Energy Storage 5000mAh for DIY 18650 Battery Portable Battery Welder with Type-C port Black-5000

  • Adjustable 11 gears, more accurate welding and more stability welding. Automatic and manual mode adjustable, easy to operate..
  • The welding pen is comfortable to use, the length of welding pen is 40cm/16 inches, that makes operation more flexible. It is low resistance oxygen free copper material, welding stability..
  • Suitable for 18650 and other cylindrical lithium batteries, nickel metal hydride batteries, cadmium nickel batteries can be welded firmly. It can be also used to weld iron, steel, stainless steel sheets with the thickness less than 0.2 mm/ 0.007 inch to other iron, steel, stainless steel materials. With it, save your time and effort..
  • Our portable spot welders own perfect over-charge, over-discharge, over-temperature etc protection functions and double protection performance.Unique overheating protection device automatically cuts off power when the overheating occurs..
  • 【Our service】In the process of using the spot welder, please feel free to contact us if you have any questions. We will replace or refund for you to ensure that you can have a pleasant shopping experience..
Check Stock

GOLDBAT 3600mAh 7.2V NiMH Battery with Deans Connector for RC Car RC Truck LOSI Associated HPI Kyosho Tamiya Hobby 2 Pack

  • 【GOLDBAT NIMH Parameter】Material: nickel metal hydride.
  • 【Performance】- Low resistance welded connections between each cell and thick 14AWG silicone power wires ensure maximum performance..
  • 【Application】- Compatible with mostly popular standard 1/10-scale 7.2V RC Car, RC Truck, RC Tank, RC Buggy like LOSI, Team Associated, HPI,....
  • 【High Capacity】- 3600mAh capacity and 6 high-tech SC Nickel Metal Hydride cell can provide extended run times..
  • 【AFTER-SALES】- Please contact us immediately if you have any problems, we will reply you within 24 hours..
Check Stock