Top Little Bear Phono Preamp

FX AUDIO MM Phono Preamp Turntable Preamplifier RIAA Amplified Line Output Mini Stereo Audio Hi-Fi Phonograph Preamp with Ground for Vinyl Record Players Low Noise Operation(with Power Supply)

  • ♪ HIGH QUALITY MATERIAL—The phono preamplifier is dedicated to vinyl record turntable, providing sound amplification and reducing distortion and noise.The turntable phono preamp is made of black gold-sinking craft PCB board and 1.6mm epoxy glass fiber cloth RF4 board, which has good impact resistance, moisture resistance and high temperature resistance.
  • ♪ MM PHONO—The HiFi phono preamp adopt Moving Magnet, which is more suitable for rock, popular, and even jazz. The output level of MM phono is higher than MC,it is low cost, high cost performance, better durability and easy to replace.The output level of CD/ DVD player is about 2mV, while the output level of the MM phono is about 3mV. The output level of the phono must be raised to a high level via amplification before the sound played back..
  • ♪ SPECIAL FOR TURNTABLE —The PHONO preamplifier is designed to be used for amplifier without "PHONO" input. The one of feature is audio RIAA curve more balance and equalization,the other is signal amplification.The stereo phono preamplifier for turntable provide more convenience and sound quality enjoyment for the audiophile..
  • ♪ ADVANCE ELECTRONIC COMPONENTS COMBINATION—The record player preamp adopts OP amp IC (NJM2068) and high quality positive and....
Check Stock

Reading Reflex: The Foolproof Phono-Graphix Method for Teaching Your Child to Read

  • 【Converts MM Turntable Signals】: BOX X1 compact ultra-low noise phono preamp converts phono signals to line-level signals. Designed with a grounding post to protect your turntable..
  • 【MM Phono Preamplifier with DC12V Power Adapter】: Output Voltage Level: 2V max (P-P) at 10K Ohms, SNR: 70dB, THD: ≤0.08% @ 1kHz and 3mV, Frequency Response: Standard RIAA. Equipped with DC12V high-quality power supply..
  • 【RCA Output & 3.5MM Headphone Output】: BOX X1 supports MM turntable input, 3.5MM headphone output, and RCA line output for powered speakers. You can connect a power amplifier through the 3.5MM AUX or RCA output, then connect the passive speakers and enjoy high-quality music with headphones through the 3.5 mm headphone output. Note: RCA line output and AUX headphone output can be output simultaneously..
  • 【Amplify Vinyl Records to Interface with Your Home Stereo System】:The built-in low noise phono preamp circuitry is highly accurate and precisely conforms to the RIAA standard. Housed in a steel black anodized case, the BOX X1 gives you flawless audio reproduction in a rugged and reliable package..
  • 【What You Get】: BOX X1 phono preamp x1, 12V power adapter x1, User manual x1, our worry-free 18-month warranty, and friendly customer service..
Check Stock

Pyle Phono Turntable Preamp - Mini Electronic Audio Stereo Phonograph Preamplifier with 9V Battery Compartment Separate DC 12V Power Adapter RCA Input RCA Output & Low Noise Operation PP555 BLACK

  • CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can....
  • LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s....
  • CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this....
  • SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect....
Check Stock

Pyle Phono Turntable Preamp - Mini Electronic Audio Stereo Phonograph Preamplifier (PP444) & Hosa CRA-202DJ Dual RCA to Dual Right Angle RCA with Ground Wire Stereo Interconnect Cable, 2 Meters

  • Product 1: CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
  • Product 1: LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers The output is 2V max (P-P) at 10K Ohms It’s better to position the preamp close to the source to reduce unwanted noise and interference.
  • Product 1: CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music For the receiver, this can be connected to speakers, computers, laptops and more.
  • Product 1: SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs Connect the turntable to the RCA inputs and ground Then, connect the amplifier receiver to the RCA outputs.
  • Product 2: Connectors: Dual RCA to Same with Ground Wire.
  • Product 2: Stereo RCA to Right-Angle Stereo RCA Cable with Ground Wire.
  • Product 2: Oxygen-Free Copper (OFC) conductors for enhanced signal clarity.
  • Product 2: OFC spiral shields for effective EMI and RFI rejection and flexibility.
Check Stock

FX AUDIO MM Phono Preamp Turntable Preamplifier RIAA Amplified Line Output Mini Stereo Audio Hi-Fi Phonograph Preamp with Ground for Vinyl Record Players Low Noise Operation with Power Supply

  • ♪ HIGH QUALITY MATERIAL—The phono preamplifier is dedicated to vinyl record turntable, providing sound amplification and reducing distortion and....
  • ♪ MM PHONO—The HiFi phono preamp adopt Moving Magnet, which is more suitable for rock, popular, and even jazz. The output level of MM phono is....
  • ♪ SPECIAL FOR TURNTABLE —The PHONO preamplifier is designed to be used for amplifier without "PHONO" input. The one of feature is audio RIAA curve....
  • ♪ ADVANCE ELECTRONIC COMPONENTS COMBINATION—The record player preamp adopts OP amp IC (NJM2068) and high quality positive and negative power....
  • ♪ INPUT & OUTPUT—MM input is mainly connected with left and right channels of vinyl record turntable.
  • GND is the ground connection between ground....
Check Stock

Pyle Phono Turntable Preamp - Mini Electronic Audio Stereo Phonograph Preamplifier & Low Noise Operation Powered by 12 Volt DC Adapter - PP999 & Amazon Basics 2-Male to 2-Male RCA Audio Cable - 4 Feet

  • CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
  • LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference.
  • CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more.
  • 2-Male to 2-Male RCA audio cable enhances audio connections.
  • ideal for home-entertainment and high-fidelity (HiFi) systems.
  • 2 RCA output (connect to either L or R input) and 2 RCA input.
  • input can be high frequency (digital audio) or low frequency (subwoofer).
  • Corrosion-resistant 24K gold-plated full-metal connectors.
Check Stock

Nobsound T3 MM Phono Preamp Record Player Preamplifier HiFi Turntable Amplifier

  • T3 phono preamp is designed for home MM(moving magnet) turntable record players to convert phono signals to line level signals. It is only a preamp,....
  • With volume control, higher amplification times can make best use of your record player performance..
  • Adopting pure copper GND and gold-plated RCA terminals, low-noise integrated circuits and high quality components to remove low frequency noise and....
  • Mini size with attractive appearance, power switch with red indicator makes it fashionable, metal aluminum case can prevent vibrations and....
Check Stock

Nobsound Little Bear T11 6N2/12AX7 Vacuum&Valve Tube Phono Turntable Preamplifier; MM RIAA LP Vinyl Record Player Preamp; Stereo HiFi Audio Pre-Amplifier

  • Little Bear T11 is a pure tube phono preamplifier working with MM cartridge turntables only. Please make sure your turntable is equipped with a PHONO signal output instead of a LINE output..
  • Little Bear T11 is based on T10 with improvement. Compared to T10, T11 has lower background noise at normal volume. Its sound performance is better with increased liveness..
  • Adopting a conventional active RIAA equalization phono stage circuit. There is 3 metal covers and 4 acrylic covers for those tubes. And you will be able to choose which type as you like..
  • Supporting 6N2/12AX7 tubes, which offers many replaceable tubes for you like 6H2,6H2n (For 6N2 type) and 12AX7B,6N4(9PIN),ECC83,5751 (For 12AX7 type)..
  • On the bottom of the description, there is a few Q&A for buyers who might meet the humming problem. If you encounter a similar issue, please check those tips, which have covered most of conditions..
Check Stock

Fosi Audio TDA7498E 2 Channel Stereo Audio Amplifier Receiver 160W x 2 and Box X1 Phono Preamp for MM Turntable

  • TDA7498E: 160W X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD), for outdoor/ bookshelf/ computer/ desktop /ceiling /floor standing speakers, can use iPod,....
  • Adopt STMicro TDA7498E chip to get clear audio sound, No pop, no audible noise, dead silent when nothing is playing through it..
  • BOX X1: Compact ultra-low noise phono turntable preamp that converts phono signals to line level signals. Designed with grounding post to protect your....
  • BOX X1 supports MM turntable input, 3.5MM headphone output and RCA line output for powered speakers. Note: You can connect a power amplifier through....
  • What you Get: TDA7498E Power Amplifier, BOX X1 Phono Preamp, Other Accessories, 18-month worry-free warranty and friendly customer service..
Check Stock

Rockville PPA52 Preamp Pro 1U Pre-Amplifier w/Bluetooth/USB/Computer Interface

  • Rockville PPA52 Preamp Pro 1U Rack Pre-Amplifier w/Bluetooth/USB/PC Interface..
  • Top of the line professional preamp with low noise and high sound quality. Built in reliable Bluetooth audio playback with long range. Built in USB/computer interface allows you to record the master output to your DAW or to play songs from your favorite software on your computer. Built in USB MP3 player. (3) RCA aux inputs. (1) RCA Phono Input. (1) XLR and ¼” Combo jack front mic/line input. (2) ¼” Inputs (mono or stereo). (2) XLR outputs (stereo or mono)..
  • 1U rack mount size. Built-in 3 band Equalizer (bass, mid, treble). Left / Right balance adjustment. Mono/Stereo selectable. Mute. Low cut crossover filter. Headphone output for listening or monitoring. Loudness compensation circuit which at low-to-medium volume boosts the bass and treble response. 100-240V worldwide voltage power adaptor.
  • Specifications: Impedance. . Mic: 1mV / 3 Kohms. Phono: 3mV / 47 Kohms. Pre-Output: max. 5V / 1 Kohms. Total Harmonic Distortion. . Mic: less than 0.02%. Phono: less than 0.04%. RCA Aux: less than 0.01%. Signal to Noise Ratio. . Mic: more than 70 dB. Phono: more than 90 dB. RCA Aux: more than 100 dB..
  • General: Product weight: 4.43 lbs. Product dimensions: 18.89" x 6.49" x 1.73".
Check Stock

Fosi Audio Box X1 Phono Preamp for MM Turntable Mini Stereo Audio Hi-Fi Phonograph/Record Player Preamplifier with 3.5MM Headphone and RCA Output with DC 12V Power Supply

  • 【Converts Phono Signals】: Compact ultra-low noise phono turntable preamp that converts phono signals to line-level signals. Designed with a grounding post to protect your turntable..
  • 【Features Power Switch & 3.5MM Headphone Output】: The unique power switch button design is very convenient to use. You can enjoy high-quality music with headphones through the 3.5 mm headphone output. Note: RCA line output and AUX headphone output can be output simultaneously..
  • 【3.5MM / RCA Output】: BOX X1 supports MM turntable input, 3.5MM headphone output, and RCA line output for powered speakers. Note: You can connect a power amplifier through the 3.5MM or RCA output, then connect the passive speakers..
  • 【MM Phono Preamplifier & DC12V Power Adapter】: Output Voltage Level: 2V max (P-P) at 10K Ohms, SNR: 70dB, THD: ≤0.08% @ 1kHz and 3mV, Frequency Response: Standard RIAA. Equipped with DC12V high-quality power supply..
  • 【What You Get】: BOX X1 phono preamp x1, 12V power adapter x1, User manual x1, our worry-free 18-month warranty, and friendly customer service..
Check Stock

ANGELS HORN High Fidelity Vinyl Record Player Bluetooth Turntable 2 Speed Belt Drive Built-in Preamp Adjustable Counterweight,Magnetic Cartridge Upgraded Version

  • 【Stable Aluminum Platter】Our turntable features a belt drive mechanism with an aluminum die-cast platter which reduces vibration for increased....
  • 【Wireless Connectivity】Built-in Bluetooth 5.0, you can enjoy your vinyl collection with all the convenience of wireless technology. Connect via....
  • 【2-Speed Belt Drive Turntable】Play your 33⅓，45RPM vinyl collection, 45 RPM adaptor included.The rotation speed can be selected according to....
  • 【Built-In Phono Preamp And RCA Output】Built in switchable phono output / line out phono preamp can perform and appreciate the music life brought....
  • 【 User-Friendly Vinyl Player】Built from wood and metal materials with a unique sense of layering, The streamlined corner design is truly....
Check Stock