Top Load Isolation Switch

3v Relay Board Raspberry Pi Arduino Relay Module 1 Channel Opto-Isolate High Level Trigger for IOT ESP8266 Microcontrollers Development Board

  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
  • 【Main Specification】- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
  • 【Adopted Optocoupler Isolation】- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
  • 【Jumper Caps】You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. And It is better to share the same power supply, because that is more convenient for using..
  • 【Wide Application】- These 3v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/IOT/ ESP8266 module etc..
Check Stock

Shuian 10 Pcs 3V Relay Power Switch Board, Songhe DC 1 Channel Optocoupler Relay, High Level Trigger for IOT ESP8266 Development Board.

  • The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
  • 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
  • Equiped with high-current relay, AC250V 10A.
  • DC30V 10A,each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Support dual power supply input ensure high anti-interference ability,high reliability of photoelectric isolation protection,The external connection uses the rotary crimping terminal, causes the wiring to be more solid..
  • You are free to select whether the relay and the signal share the same power supply or not by removing the jumper caps on the pins or not. It is recommended to share the same power supply, because that is more convenient for using..
Check Stock

3V Relay Power Switch Board, Icstation 1 Channel Optocoupler Module Opto Isolation High Level Trigger for IOT ESP8266 Development Board (Pack of 5)

  • 【Optocoupler Isolator】 3V/3.3V power relay module supports photocoupler isolation control..
  • 【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
  • 【Jumper Caps】You are free to select whether the relay and the signal share the same power supply or not by removing the jumper caps on the pins or not. It is recommended to share the same power supply, because that is more convenient for using..
  • 【Rotate Screw Terminals】 The external connection adopts a rotary crimping terminal, which makes the crimping more firm, and has fixed mounting holes for easy installation..
  • 【30VDC 250VAC Load】The power switch is compatible with 10A 250VAC and 10A 30VDC load..
Check Stock

interVOLT 12V DC Stabilizer / Voltage Regulator / Power Conditioner / Battery Charger (10-16 VDC Input - 12.5/13.6 VDC Output) - Heavy Duty 7A DC-DC Isolated - Model SPCi121207

  • PROTECT VALUABLE ELECTRONIC EQUIPMENT - A small investment in a professional grade external power conditioner saves money, frustration and time..
  • EXCELLENT LINE AND LOAD REGULATION - 7A continuous load rating. 93% efficiency. Highly stable under a range of input conditions (10 - 16 VDC)..
  • SWITCH SELECtABLE OUTPUT VOLTAGE (12.5 or 13.6 V DC) - Galvanic isolation between input and output - Wide operating temperature (-25 to +45 C).
  • MARINE GRADE - Corrosion resistant materials.
  • Conformally coated circuit board - Compact Size - Suitable for high/low temperature environments.
  • STABILIZE VOLTAGE from alternators, generators, batteries, solar panels and unregulated DC power supplies in cars, trucks, RVs, boats, communications and industrial equipment.
Check Stock

2P 250V Low-voltage DC Miniature Circuit Breaker For Solar Panels Grid System Din Rail Mount 16A

  • This is a great circuit breaker used to protect a low-voltage DC electrical system from damage caused by excess current resulting from an overload or short circuit.
  • Fast trip to ensure reliable operation of the load and prolong the life of electrical circuit breakers. It can also work as on-off switch for DC load circuits.
  • DC breaker is more powerful than AC breaker to extinguish arcs. It means that our low-voltage breaker can be used at the same level voltage of DC and AC circuit system.
  • Modular structure, can be easily installed on the DIN standard guide rail in distribution box, bistable locking clip, the installation more convenient. Suitable for isolation in accordance with industrial standards: IEC EC60947-2/GB14048.2.
  • Widely used for solar panels grid system, wind and solar hybrid system and many other DC systems.
Check Stock

2P 250V Low Voltage DC Miniature Circuit Breaker for Solar Panels Grid System Din Rail Mount(63A) Breaker DC Circuit Amp Solar Double Pole

  • This is a great circuit breaker used to protect a low-voltage DC electrical system from damage caused by excess current resulting from an overload or short circuit.
  • Fast trip to ensure reliable operation of the load and prolong the life of electrical circuit breakers. It can also work as on-off switch for DC load circuits.
  • DC breaker is more powerful than AC breaker to extinguish arcs. It means that our low-voltage breaker can be used at the same level voltage of DC and AC circuit system.
  • Modular structure, can be easily installed on the DIN standard guide rail in distribution box, bistable locking clip, the installation more convenient. Suitable for isolation in accordance with industrial standards: IEC EC60947-2/GB14048.2.
  • Widely used for solar panels grid system, wind and solar hybrid system and many other DC systems.
Check Stock

USB Isolator ESD Protection Ground Loop Isolator ADUM3160 Only USB 2.0 Full/Low Speed up to 1W Power

  • Remove ground loops, protect PC, eliminate humming noise.
  • Signal isolation up to 2.5KV, power isolation up to 1.6KV.
  • Supports USB 2.0 Full/Low Speed, ⚠ USB 2.0 High Speed Devices are not supported ⚠.
  • Up to 1W load capacity, ⚠ not for charging or devices drawing over 180mA.
  • Uses ADUM3160 IC for signal and B0505S for power isolation.
Check Stock

STEREN Coaxial Cable Splitter - Coax A B Switch - Coax Splitter 2 Way Two Way Splitter - A B Switch - 2 Way Coaxial Cable Splitter - Coax Cable Splitter - 2 Way A/B Slide Switch - 1 Pack 200-310

  • AFFORDABLE AND EFFECTIVE: Say goodbye to expensive electricians with our AB switch box!.
  • 2 WAY COAXIAL A B SWITCH: Switches between 2 input sources. 75-ohm input/output.
  • HIGH ISOLATION TV AB SWITCH: Steren's AB slide has a 90dB high-isolation and bandwidth of 5-900MHz..
  • F TYPE COAXIAL SWITCH: This coaxial cable switch works for F-type female ports..
  • EASY INSTALLATION: Our coax cable switch makes installation easy with our hardware and adhesive pad..
Check Stock

2 RockvilIe RHT8C Computer/Bookshelf Desktop Speaker/Studio Monitor Stands-Wood

  • (2) Rockville RHT8C Computer/Bookshelf Desktop Speaker/Studio Monitor Stands-Wood, Finished with premium furniture-grade paint that will not crack, chip, or peel..
  • Made from high quality medium density fiber core to minimize resonance, Isolation pads create a no-slip surface as well as improve acoustical performance.
  • 66 lbs. load capacity allows you to use a heavier speaker without compromising stability. Specifications: Stands Height: 8", Base plate size: 11.8" 9", Top Platform size 1: 9.25" 7.28".
  • Item Load weight capacity: 66 lbs. Item weight per pair 9.6 lbs. Shipping weight 11.5 lbs. Color: Wood, Shipping dimensions 13.8” x 10” x 11.4”.
  • Product dimension 11.8” x 9” x 8”, Includes: 8 Isolation pads, 4 Cable clips, 4 Cable ties, 16 Screws.
Check Stock

AEDIKO 4pcs DC 5V Relay Module 2 Channel Relay Board with Optocoupler Support High or Low Level Trigger

  • Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A.
  • 2 Channel Relay Module 5V Comes with High-Current Relay,Trigger Current : 5mA.
  • 5V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input.
  • Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move.
  • With Optical Coupling Isolation,Triggering More Reliable and Stable.
  • 2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers.
Check Stock

EDECOA 3000VA 24V Pure Sine Wave Hybrid Inverter Off-Grid DC 24V to AC 120V with 80A MPPT Solar Contorller Solar Inverter for RV Home Solar System (3KVA/2400W 24V MPPT)

  • ...ing machine, compressor, drill, saw, vacuum cleaner, etc..
  • HIGH TECHNOLOGY: The 24V 120V 3000W pure sine wave inverter adopts powerful signal processing circuit to improve the stability and anti-interference of SPWM system, efficient conversion efficiency 90% and high load capacity. The 2400w inverter has a galvanic isolation system between DC and AC..
  • LCD & SOFTWARE MONITOR CONTROLLER: Indicates working status from the LCD or computer (Host computer monitoring support: RS232 interface, watchpower software). switch mode: 3 modes output working fit your load and 4 modes charging your battery. Output: Solar first, Utility first, Solar and battery energy first. Charging modes: Solar power first, Ultility power first, Solar and Utility,only Solar..
  • MULTIPLE PROTECTION: Protection against low voltage, over-voltage, over temperature, overload, and over-voltage. Voltage regulation is automatic (AVR) and has intelligent power management (IPM)..
  • WHAT YOU GET: EDECOA 3KVA hybrid power inverter, User manual, Communication cable, Software CD ,a pair of Battery cable, 12-month warranty and life-time customer support.
Check Stock

NAD Electronics C165BEE Stereo Preamplifier with Phono Section

  • As a VU meter, with dual 60*35mm large meter, can dynamically decorate audio environment and provide incomparably visual effects when switching audio signals..
  • As an audio switcher, easily to switch between two amplifiers and 2 pair of speakers, no need to plug in and out cables repeatedly to avoid wearing the contact point of the sockets..
  • Powerful design and strong compatibility: all channels adopt fully isolation design, each channel's GND is independent without mutual interference. Supports all kinds of amplifier such as BTL / class A / class B / class D digital amplifier / tube amplifier etc..
  • Easy Use & Perfect Details: Powered by micro-USB 5V, with built-in protection load for speakers. With remote control, can quickly set the working status from distance. All settings can be saved after shutdown, more convenient to use..
  • Proper size with exquisite appearance: cool black case, warm VU meter and clear indicators looks vintage and dynamic, can perfectly match with a variety of usage scenarios, very suitable for audiophiles who have more than one amplifiers or speakers..
Check Stock