Top Loading Dock Safety Gear
880 Lb. Cap. Manual Lift Stacker, 59\ Lift
- Unique design services semi-trailers when loading dock is unavailable.
- Tread plate surface provides a safe non-slip grip.
- Safety velocity fuses protect the hydraulic cylinders.
- Upper travel limit switch cuts power to unit when max raised height is reached.
Check Stockfor 10 JLG 9901 Key Electric Scissor Lift
- Unique design services semi-trailers when loading dock is unavailable.
- Tread plate surface provides a safe non-slip grip.
- Safety velocity fuses protect the hydraulic cylinders.
- Upper travel limit switch cuts power to unit when max raised height is reached.
Check StockGuardian 48\ x 48\ Aluminum 2,600 lb Pallet Jack Loading Dock Plate
- For loading dock pallet trucks, pallet jacks, carts, and foot traffic material handling.
- 48" x 48" Loading dock plate with a 9" lip-bend and machine beveled edges.
- Includes bolt-on carrying handles and steel lock legs.
- Maximum 2,600 lb. capacity over 5" surface height at 14% grade or 7" at 19% grade.
- Heavy duty all aluminum construction with a diamond tread surface.
Check StockGuardian 60\ x 48\ Aluminum 2,500 lb Pallet Jack Loading Dock Plate
- For loading dock pallet trucks, pallet jacks, carts, and foot traffic material handling.
- 60" x 48" Loading dock plate with a 9" lip-bend and machine beveled edges.
- Includes bolt-on carrying handles and steel lock legs.
- Maximum 1,800 lb. capacity over 7" surface height at 14% grade or 9" at 19% grade.
- Heavy duty all aluminum construction with a diamond tread surface.
Check StockGuardian 24' x 36' Aluminum 3,600 lb Pallet Jack Loading Dock Plate
- For loading dock pallet trucks, pallet jacks, carts, and foot traffic material handling.
- 24" x 36" Loading dock plate with a 9" lip-bend and machine beveled edges.
- Includes bolt-on carrying handles and steel lock legs.
- Maximum 3,600 lb. capacity over 1" surface height at 14% grade or 2" at 19% grade.
- Heavy duty all aluminum construction with a diamond tread surface.
Check StockVestil V-1124-6 Rubber Vertical Laminated Dock Bumper, 24\ Length, 11\ Width, 6\ Depth
- Vertical loading dock bumper for preventing damage by a vehicle to dock or building.
- 6" rubber padding for elasticity and resistance to impact.
- Fabric-reinforced for strength and dimensional stability.
- Steel mounting and tie rods for strength and durability.
- Welds to dock or bolts to dock for easy installation.
Check StockRage Powersports ADP-4860-2900 48-Inch x 60-Inch Aluminum Pallet Jack Loading Dock Plates
- For loading dock pallet trucks, pallet jacks, carts, and foot traffic material handling.
- 48" x 60" Loading dock plate with a 9" lip-bend and machine beveled edges.
- Includes bolt-on carrying handles and steel lock legs.
- Maximum 2,900 lb. capacity over 5" surface height at 14% grade or 7" at 19% grade.
- Heavy duty all aluminum construction with a diamond tread surface.
Check StockTaylor Made Products 83550 Stow 'N Go Low-Profile Dock Box, 20 x 40 x 19-Inch/Small
- DURABLE CONSTRUCTION—The dock box molded fiberglass design holds up in all types of marine environments. The heavy duty stainless steel lockable latch and hinges are corrosive resistant and will keep your gear safe and protected.
- EASY ACCESS —Our deck box is a breeze to open and securely close with the built-in gas lift shocks, especially helpful with an armful of gear. These gas shocks, standard in all dock boxes, keeps the lid open even in high wind areas and unstable docks.
- KEEP YOUR GEAR SAFE— You don’t have to worry about your gear with the stainless-steel lockable latch, giving you peace of mind that your marine accessories are safely stored on your dock or your boat. The stainless steel hardware is corrosion-resistant.
- UNRIVALED QUALITY — Our storage boxes are designed for the marine life and have a smooth UV gel-coat finish on both the exterior and interior. Say goodbye to painful splinters or stray fiberglass pieces while you are grabbing or storing your boating gear.
- MADE IN THE USA — Built right here in the USA, boaters know they can trust Taylor Made....
Check StockVestil Rubber Specialty Molded Dock Bumper, T-Shaped, 22\ Length, 22\ Width, 3\ Depth
- Horizontal loading dock bumper for preventing damage by a vehicle to dock or building.
- 6" rubber padding for elasticity and resistance to impact.
- Fabric-reinforced for strength and dimensional stability.
- Steel mounting and tie rods for strength and durability.
- Welds to dock or bolts to dock for easy installation.
Check StockVestil V-1120-4.5 Rubber Vertical Laminated Dock Bumper, 11\ Width, 20\ Height, 4.5\ Depth
- Vertical loading dock bumper for preventing damage by a vehicle to dock or building.
- 4-1/2" rubber padding for elasticity and resistance to impact.
- Fabric-reinforced for strength and dimensional stability.
- Steel mounting and tie rods for strength and durability.
- Welds to dock or bolts to dock for easy installation.
Check StockTPI Corporation 40-LDA Fostoria Loading Dock Arm – 40\ Reach Dual Square 1-1/2 inch Steel Tubing, 120V, with Two Embedded outlets, Safety Yellow
- 40" Reach Dual Square 1-1/2 inch Steel Tubing allows for fastening optional dock fan head or light head (sold separately). Outer arm includes two embedded outlets and rotates 210-degress horizontally.
- rated for 120-Volt electrical operation..
- Chip resistant safety yellow & black powder coated finish for high visibility and durability. Rugged steel wall plate 3x5x3/16 mounting plate rotates 180-degs and allows for fastening (4) 3/8" bolts (not supplied) to a vertical or structural surface..
- 5-foot long SJT 18/3 grounded 3-prong cord, 120V, 1PH.
- exits the back of the arm for convenient plug-in electrical connection.
- shipped fully-assembled - ready for plug & play operation..
- ETL Listed for USA/Canada. Long lasting construction is made in the USA with heavy 11-gauge steel tubing designed for harsh environments..
- Where Used: Engineered for variety of applications to solve hard to cool or illuminate areas such as loading dock trailers, back dock areas, conveyor systems, personal workstations, shops, garages, processing, commercial handling or industrial areas..
Check StockTPI Corporation 60-LDA Fostoria Loading Dock Arm – 40\ Reach Dual Square 1-1/2 inch Steel Tubing, 120V, with two embedded outlets, safety yellow
- 60" Reach Dual Square 1-1/2 inch Steel Tubing allows for fastening optional dock fan head or light head (sold separately). Outer arm includes two embedded outlets and rotates 210-degress horizontally.
- rated for 120-Volt electrical operation..
- Chip resistant safety yellow & black powder coated finish for high visibility and durability. Rugged steel wall plate 3x5x3/16 mounting plate rotates 180-degs and allows for fastening (4) 3/8" bolts (not supplied) to a vertical or structural surface..
- 5-foot long SJT 18/3 grounded 3-prong cord, 120V, 1PH.
- exits the back of the arm for convenient plug-in electrical connection.
- shipped fully-assembled - ready for plug & play operation..
- ETL Listed for USA/Canada. Long lasting construction is made in the USA with heavy 11-gauge steel tubing designed for harsh environments..
- Where Used: Engineered for variety of applications to solve hard to cool or illuminate areas such as loading dock trailers, back dock areas, conveyor systems, personal workstations, shops, garages, processing, commercial handling or industrial areas..
Check Stock