Top Locknut Hex

Sigma Electric ProConnex C-560 Snap Lock AC/MC Connector 3/8-Inch, 25-Pack

  • Terminates AC or MC to a 1/2" knockout without a locknut.
  • For aluminum or steel 14/2 - 10/3 AC or MC.
  • No locknut assembly for faster installation.
Check Stock

Valterra RF850 1/4\ MPT x 3/8\ Barb Adapter

  • Right Angle Nylon Cable Glands NPT Thread - These Right Angle Cable Glands are corrosion resistant..
  • Seal & clamp system allows the cord connector to tighten in a circular sequence on the sealing ring to give outstanding strain relief without twisting or damaging the cable.
  • Simply push the cable through the liquid tight Nylon strain relief & tighten locknut for quick installation.
  • Threads into your panel for clearance, locknut included.
Check Stock

Gardner Bender LNW-3PC LNW locknut wrench, Assorted

  • Locknut wrench solves the problem of tight spaces and fits the majority of UL locknuts.
  • Etched markings allow for easy identification.
  • clearly marked tighten and loosen ends make usage a breeze.
  • each tool is a different color for easy size identification.
  • Thin design allows easy maneuvering in tight locations.
  • Hooked tip latches onto locknut and maximizes turning leverage.
  • 3-piece kit includes the 1/2 in. , 3/4 in. and 1 in. sizes.
Check Stock

Morris 21816 Liquid Tight Connector Straight Non-Metallic 1-1/4 Thread Size 1-Pack

  • Non-Metallic Liquid Tight Wire Connectors Straight With Steel Locknut - Our Liquid Tight Straight Connectors are weather and corrosion-proof..
  • For use with Non-Metallica Liquid Tight conduit.
  • Type B - Nylon construction with Zinc Die Cast Locknut - resists saltwater, gasoline, alcohol, oil and grease.
Check Stock

Whittet-Higgins CNM-08 Threaded Clampnut/Shaft & Bearing Locknut Collar, Metric M40 x 1.5 Right-Hand Thread, Self-Locking,

  • Slit locknut design with socket head cap screw provides single-point tangential locking.
  • Self-Locking. Prevents assemblies from loosening from large forces of vibration, shock and torque.
  • Easier and faster to install than traditional locknut & lockwasher.
  • Black oxide coating with wax finish to inhibit corrosion.
Check Stock

Gardner Bender LNW-KIT Locknut Wrench Kit, ½ & ¾ Inch., Loosen / Tighten locknuts, Steel Construction fits UL locknuts, 2 Pk. Bundle, Black

  • Locknut wrench solves the problem of tight spaces and fits the majority of UL locknuts.
  • Etched markings allow for easy identification.
  • clearly marked tighten and loosen ends make usage a breeze.
  • Thin design allows easy maneuvering in tight locations while durable steel construction makes it strong enough to get the job done.
  • Hooked tip latches onto locknut and maximizes turning leverage.
  • Kit contains one ½ inch wrench (LNW-500) and one ¾ inch wrench (LNW-750).
Check Stock

CARTMAN 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

  • Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts. Features: Internal and External Three Leg and Two Leg jaw puller yokes.
  • 5lb. Slide Hammer, 425mm long, M16*1.5mm UNF thread.
  • Front Hub puller, Rear Axle puller, Locknut Cone.
  • Dent puller screws (large and small), Supplied in blow mold storage case..
  • Features: Internal and External Three Leg and Two Leg jaw puller yokes..
Check Stock

LITTLE GIANT DuraFork Pitch Fork Replacement Head (Green) Durable Polycarbonate Stable Fork Head with Angled Tines (Item No. PDF103GREEN)

  • POLYCARBONATE CONSTRUCTION - This stable fork heads' polycarbonate design offers superior flexibility and strength..
  • ANGLED TINES FOR LESS SPILLING - The pitch fork head has angled tines result in less spilling through the tines of the fork and overall less mess..
  • FORK DIMENSIONS - This pitch fork head's tines are 13.125 inch long by 15.125 inch wide..
  • NYLON LOCKNUT ATTACHMENT - The pitchfork head attaches to the handle by nylon locknut that offers firm attachment to the pitchfork handle..
  • COLOR OPTIONS AVAILABLE -These pitch fork heads come in several colors included: Berry Blue, Black, Blue, Burgundy, Green, Hot Pink, Lime Green, Orange, Purple, Red, Teal..
Check Stock

Southwire 58133801 1/2-in 90 Degree Liquid-Tight Connector,Grey

  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Molded of type nylon 6. Flammability classification 94V-2: temperature index 125°C.
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, tightening the domed sealing nut. The completed assembly can then be secured in the chassis by the locknut (or first secure the connector into an NPT threaded hole).
  • No threading of the conduit or tubing required to install, eliminating the possibility of cutting the conduit and creating leak paths. Applications: HVAC equipment.
  • Complete conduit/connector system is reusable. Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • for original equipment manufacturers or field installers. 0 Ring and steel locknut included.
Check Stock

20mm 24mm Lock Nut Remover Clutch Removal Tool Compatible with ATC 110 125 ATC 90 CA 200 CB 200 Bike,4-Pin Spanner Socket Wrench for Taotao Roketa SSR ATV Dirt Bike

  • Compatible with Combo Gl 1200 1984 1985 1986 ,Replace special tool: # 07716-0020100, 07vma-mbb0100-101,Removes locknut: 90231-0231-028-000,....
  • Compatible with HODA ATC 110 125 ATC 90 CA 200 CB 200 Crf 600rr 450r 250l Bike Taotao Roketa SSR ATV Dirt Bike.
  • Fit for 14mm clutch locknut on crf50, xr200 1980-1984, xr200r 1984-1994, xr250l 1991-1994, xr250r 1986-1994, cl, ct, sl & xl models. Crf50, z50, xr50,....
Check Stock

ELECTRIC DRILL to SCREWGUN CONVERTER Adjustable Clutch Drywall Tool Screw Depth Setter w/Manganese S2 Phillips 2 Screwdriver Bit | Countersink Plywood Deck PH2 Screws | 1/4 Shank Fits Corded Cordless

  • ... ★【EASY DEPTH ADJUSTEMENT】 - Set drywall, plywood and deck screws just right for depth. Enables to sufficiently countersink and counterbore screw heads precisely into any panel products. Depth adjustment works very easily and precisely with two threaded aluminum collars, main collar works as a stopper and the locknut collar as friction lock. (Stopper collar may leave a circular mark on the piece being worked on so it is recommended to work primarily on unfinished surfaces with screw setter tools).
  • ★【THE SCREWDRIVER BIT IS REMOVABLE AND REPLACABLE】 – No need to replace the entire tool, most standard 1/4 hex 1" bits fit in. 4pcs of 1” Phillips #2 REAL IMPACT BITS come in the package. These bits are MAGNETIZED and easy to work with. Manganese Phosphate Coated bits offer excellent wear resistance and they are corrosion proof even in humid climates..
  • ★【BUILD-IN CLUTCH】 disengages from drive-in function while reaching the workpiece. line up the screw, put this driver on the screw, then start drilling. It'll click when it reaches the depth, but if you lift off now it'll strip the screw a little. Instead, let the drill stop, then lift. The cl....
Check Stock

Toolwiz Spanner Wrench, Pipe Wrench C Hook Wrench Coilover Wrench with Long Rubber Non-Slip Handle Compatible for Floor Heating Pipes, Cars Walnut, Suspension Systems, and Shock Adjustments - Red

  • ...repairing, mechanical maintenance, and Pipe Fittings with an outer diameter of 1 1/4 inches.
  • Applicability: C Hook Wrench is also suitable for suspension systems and Coilovers Shocks adjustments. It can be used as coilover wrench to adjust the coil shocks, lock nuts, pipe fittings, and sleeves ...
  • Upgrade Design: The locknut wrench has an increased handle length of 16 cm, and provides more leverage than traditional shorter locknut wrenches, making it easier to tighten or loosen the lock nuts from sleeves. Perfect DIY plumbers wrench home tool set.
  • Reliable Quality: The spanner wrench is an excellent hand tool set, made of ultra-high-strength carbon steel, making it strong and durable with excellent corrosion resistance ensuring long-term use. C wrench non-slip rubber handle supports a tight grip, improves performance, safety, and comfort.
  • Perfect Gift Idea: An wrench spanner is a perfect home tool set and a practical present for your family, relatives, and friends tool set for car repairing DIY works.
  • You Will Get: 1pc Coilover Wrench Carbon Steel Spanner Wrench Tool with 16cm Long Non-Slip Handle universal fit for 1 1/4 inch Lock Nuts Removal & Tighten.
Check Stock