Top Low Alloy Steel Plates

JET S90-200-10, 2-Ton Hand Chain Hoist with 10' Lift (101930)

  • Overload Warning: Industrial-rated alloy steel hooks rotate 360 degrees for easy rigging, and slowly stretch to indicate overloads..
  • Extended Life: Intended for the harshest environments, load plates are heat treated, and internal parts are case hardened and corrosive resistant..
  • Smooth Operation: Needle bearings support the load sheave to increase efficiency..
  • Compact Size: The smaller body and lightweight design are ideal for confined areas and low headroom applications..
  • Load Security: Weston-style double ratchet pawl brake design splits the load to opposite sides of the ratchet gear..
  • Added Durability: Grade 80 black oxide coated load chain..
Check Stock

Heavy Duty Clutch Kit for Honda TRX 400EX TRX400EX 1999-2014 w/Springs & Clutch Cover Gasket Replace 103068009 1030660005

  • Clutch Kit Fitment - Heavy duty clutch kit fit for 1999-2008 Honda Sportrax 400 TRX400EX 2x4, for 2009 Honda TRX400X 2x4, for 2012 Honda TRX400X 2x4,....
  • What You Will Get - Heavy duty clutch kit with Springs includes the full set of friction, steel separator plates and springs..
  • Clutch Kits Function - Increased flywheel effect of steel plates improves power spread, enables the engine and transmission to smoothly engage and....
  • Material + Easy to Install - All clutch kits include steel plates which outlast stock alloy units and prevent heat distortion, the gasket is made of....
  • Customer Service - 100% tested, professional installation is highly recommended, you will get a 2-years shelf life for our store, If there are any....
Check Stock

JET S90-050-10, 1/2-Ton Hand Chain Hoist with 10' Lift (101900)

  • Overload Warning: Industrial-rated alloy steel hooks rotate 360 degrees for easy rigging, and slowly stretch to indicate overloads..
  • Extended Life: Intended for the harshest environments, load plates are heat treated, and internal parts are case hardened and corrosive resistant..
  • Smooth Operation: Needle bearings support the load sheave to increase efficiency..
  • Compact Size: The smaller body and lightweight design are ideal for confined areas and low headroom applications..
  • Load Security: Weston-style double ratchet pawl brake design splits the load to opposite sides of the ratchet gear..
  • Added Durability: Grade 80 black oxide coated load chain..
Check Stock

BEAMNOVA 2 Ton 4400 lbs Vertical Plate Lifting Clamp Sheet Metal Lifting Clamp Metal Steel Plate Lifting Clamps Lifters Heavy Duty

  • HEAVY-DUTY MATERIAL - BEAMNOVA plate lifting clamp is made of high-quality durable alloy steel with anti-rust coating for surface protection, which can withstand the harsh environment and last for long service life..
  • 4400LBS CAPACITY & FLEXIBLE CLAMPING - BEAMNOVA industrial lifting clamp has a large load capacity of up to 2 tons (4409lbs), with an opening range from 0 to 25mm (1”)..
  • EASY TO USE - Just pull the ring to open the fixture, loosen the jaw by the hook, clamp the steel plate into the opening, and then pull back the spring to lock..
  • SAFE – With a powerful clamping jaw, the vertical clamp can lock tightly the steel plates of varying thickness. Features a safety spring mechanism that ensures the clamp does not slip when lifting or lowering a load..
  • WIDE APPLICATION - Used to lift and transport steel plates and structures from any position (horizontal, vertical, and lateral). It is suitable for heavy lifting or transportation of steel plates and metal sheets. Widely applicable for steel structure installation, steel market, machine processing, steel plate welding, cutting, and handling..
Check Stock

JET S90-050-30, 1/2-Ton Hand Chain Hoist with 30' Lift (101903) , White

  • Overload Warning: Industrial-rated alloy steel hooks rotate 360 degrees for easy rigging, and slowly stretch to indicate overloads..
  • Extended Life: Intended for the harshest environments, load plates are heat treated, and internal parts are case hardened and corrosive resistant..
  • Smooth Operation: Needle bearings support the load sheave to increase efficiency..
  • Compact Size: The smaller body and lightweight design are ideal for confined areas and low headroom applications..
  • Load Security: Weston-style double ratchet pawl brake design splits the load to opposite sides of the ratchet gear..
  • Added Durability: Grade 80 black oxide coated load chain..
Check Stock

Rep Color Bumper Plates for Strength and Conditioning Workouts and Weightlifting, 370 lb Set

  • WHAT’S INCLUDED: 370 lb color bumper set. 1pair of 10lb gray, 1pair of 15lb black, 1 pair of 25lb green, 1 pair of 35lb yellow, 1 pair of 45lb blue, and 1 pair of 55lb red rubber polymer plates. Plates are 17.5 inches in diameter with 2-inch steel collar openings. 1-year warranty on 10's and 15's, 3-year warranty on 25's, 35's, 45's, 55's (home use only).
  • BUMPERS BUILT TO LAST: REP Fitness color bumper plates are designed with durability in mind. Steel inserts with hooks molded into the plate and low-bounce rubber make our bumper plates last over 15,000 drops – that’s a lot of reps! Our 10 lb. plates are extra thick (1") to increase durability and minimize “tacoing” or folding in on itself, while our 45 lb. plates are thinner than most at 2.83", letting you fit up to 515 pounds on the bar..
  • UNRIVALED VERSATILTY - Rubber bumper plates from REP Fitness give you complete control over your training. They’re great for traditional movements like squats, deadlifts, and presses to increase strength and for Olympic movements like the clean, jerk, and snatch to build power. Or use them in your cross-training program to ....
Check Stock

Twist Drill Bit 0.63 in/16mm Reduced Shank High Speed Steel Drill Bit with 1/2\ Shank, 118-Degree Black Oxide Drill Bit.

  • Precision ground with geometry of 118 degree split point for quick penetration and accurate start-up..
  • Application: Suitable for cutting stainless steel, aluminum alloy, iron, wood, copper pipe....
  • Note: It can be used for stainless steel plates with a thickness of 2 inch or less. When processing materials with high hardness, run at low speed and use water or coolant..
  • Features: When running in a counterclockwise direction (right hand cut), the spiral groove tool drains the chips upwards and cuts the cuts to reduce blockage.
Check Stock

INTBUYING Electric Plastic Shredder Recycling Disintegrator Plastic Crusher Grinding Granulator Machine Heavy Duty Grinder for PE PP PVC PET 220V 2.2KW

  • ☛【Multifunctional Grinder】Multifunctional crusher meets various crushing needs.It can shred wood, plastic, nylon products, cloth, paper, circuit boards, PP/PC, PA/PE, PVC, PET/ PS, FRP, aluminum bottle caps, spices, corn, grain and etc..
  • ☛【Alloy Steel Blade】The cutter is made of special stainless steel, which is extremely sharp and durable. The cutter gap is adjustable, and the blade can be disassembled and polished after it becomes dull..
  • ☛【Low noise 】The machine crushing room is made of double-layer sound insulation and thickened double-layer plates, which is powerful and quiet, and low noise.The hopper, main body and filter screen can be disassembled for easy cleaning and maintenance..
  • ☛【Reliable and Stable】Split design .High quality pure copper motor, strong power, stable performance, high-strength steel screws used to fix the blade and tool holder, with large bearing capacity and not easy to fall off..
  • ☛【Secure and Warranty】The motor of the crusher has overload protection and power chain protection device, which doubles the motor protection and user safety.We offer lifetime after-sales service..
Check Stock

Twist Drill Bit 3/4″ Reduced Shank High Speed Steel Drill Bit with 1/2″ Shank, 118-Degree Drill Bit for Drilling Metal Plate and Wood.

  • Precision ground with geometry of 118 degree split point for quick penetration and accurate start-up..
  • Application: Suitable for cutting stainless steel, aluminum alloy, iron, wood, copper pipe….
  • Note: It can be used for stainless steel plates with a thickness of 2 inch or less. When processing materials with high hardness, run at low speed and use water or coolant..
  • Features: When running in a counterclockwise direction (right hand cut), the spiral groove tool drains the chips upwards and cuts the cuts to reduce blockage.
Check Stock

Picowe Cooler Tie Down Kit, Cooler Tie Down Straps, Tie Down Kit Cooler Straps, Cam Buckle Lashing Straps for YETI Coolers for RTIC Coolers

  • Fit for YETI coolers and other cooler like for RTIC coolers with tie-down slots on the boat, deck, truck bed or trailer..
  • It helps to secure cooler in boat deck truck bed trailer, prevent from slipping, and ensure safe travel for your friends and family..
  • The tie down straps is made of high nylon with alloy cam buckles, solid and durable. The deck plates made of marine grade stainless steel which never rust. A must have cooler accessories..
  • It’s easy to install. Secure deck plates to floor with screws, nylon straps pass through the deck plates and cooler tie-down slot, adjust straps length with quick release cam buckle..
  • Package include: 2 x Picowe nylon straps with cam buckles, 2 x Picowe stainless steel deck plates, 9 x Picowe screws, 1 x user manual.
Check Stock

PENN Fishing SQL20LWLC Squall LevelWind , Black Gold, 315yd/20Lb

  • Level wind trolling reel for big game fish in a variety of saltwater conditions.
  • Durable construction with lightweight graphite frame and side plates and bronze main gear and stainless pinion gear.
  • HT-100 carbon fiber drag system provides powerful drag without sacrificing smoothness.
  • 2 stainless steel ball bearings and instant anti-reverse bearing that eliminates rotor backplay.
  • Forged and machined aluminum spool is braid ready and has line capacity rings marked at 1/3, 2/3, and full capacity.
  • Graphite frame and side plates keep the reel lightweight.
  • Machined high-strength main gear is marine grade bronze alloy.
  • High strength stainless steel pinion gear for the ideal smoothness.
  • HT-100 drag washers remain cool and smooth in the heat of battle.
  • 2+1 shielded stainless steel bearing system and anti-reverse.
Check Stock

SHOUCAN Titanium Sheet Plate Thickness 1-4mm Ta2 Metal Titanium Suitable for Aerospace Industrial, 100×100mm/200×100mm,100×100×1.5mm

  • ✈ High plasticity: Density titanium alloy generally about 4.5g / cm3. which is only 60% of steel. Mechanical strength, twice as big as aluminum, magnesium greater than five times.The strength of titanium alloy is higher than that of general stainless steel and aluminum alloy, and can reach twice that of stainless steel..
  • ✈ High heat intensity: Temperature of several hundred degrees higher than aluminum. The melting point of 1942K, higher than gold 1000K, higher than steel 500K.The melting point of pure titanium is 1678°C. After adding alloying elements titanium alloy, the melting point of the alloy generally decreases, and generally decreases with the increase of the alloying element addition..
  • ✈ Good corrosion resistance: Titanium work in a humid atmosphere and seawater, the corrosion resistance is far superior to stainless steel.
  • for pitting, etching, stress resistance particularly strong.
  • and other organic materials have excellent corrosion resistance..
  • ✈ Good low temperature performance titanium alloys at low temperatures and extremely low temperatures, can still maintain its mechanical properties. It maintains good ductility and toughness at low temperatures of -196-253°C, and avoids the cold brittleness of metals, which makes it an ideal....
Check Stock