Top Low Carbon Steel

PSCCO 12PCS U-Shaped Steel Tapped Hole Clip On Nut Including Screws

  • Corrosion resistant metal. However, over time, all metals tend to corrode. However, the properties of this metal are better than those of soft low-carbon alloys such as carbon steel..
  • U-shaped Steel Tapped Hole Clip Size: 25*14*5mm.
  • Just clamp it on the panel and fix it with the screws provided..
  • Clips are galvanized and screws are powder coated..
Check Stock

4 Pieces Set of 7.5 and 8.5 and 9 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife Set, 3 to 4.5 inches Cutting Edge, Compact Pocket Knife Blanks

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 33 inches Damascus steel blade..
  • Set Contains: a) 9" long straight back blade with 4" cutting edge. 3 pins holes and a Mosaic hole. b) 8.5" long trailing point blade skinning knife with 3.5" cutting edge. 3 pin holes and a Mosaic hole. c) 8.5" long pocket drop point blade with 3.5" cutting edge. 3 pins holes and a Mosaic hole d) 7.5" long compact trailing point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

FGen 100pcs Low Noise Motor Dedicated 608RS Skateboard Bearing Fingertip Gyro Special Bearing Red

  • Bearing material: bearing material is divided into bearing steel, high carbon steel, low carbon steel, sealing material is divided into iron cover and....
  • Bearing model: 608RS bearing length: 8mm * 22mm * 7mm, with skateboards, skates, roller skates, long, electric skateboard, the highest precision in....
  • Deep groove ball bearings are mainly subjected to radial loads and can also bear both radial and axial loads. When it is only subjected to radial....
  • This type of bearing has small friction coefficient, high speed limit, simple structure, low manufacturing cost and easy to achieve high manufacturing....
  • Dimensional range and form vary, used in precision instruments, low noise motors, automobiles, motorcycles and general machinery, etc. It is a widely....
Check Stock

15' Long hand forged Damascus steel Eagle Kukri Knife, 10 inch long full tang blade, Bull horn scale with steel bolster, Cow hide Leather sheath with belt loop

  • 15" Long hand forged Damascus steel full tang blade Eagle Kukri Knife. Full tang blade goes through all the handle as well in a single piece so full tang blades are durable and stronger than non full tang blades.
  • Natural Bull horn scale with steel bolster. Handle Length is 5 inches with inserting hole. Up to standard Eagle Kukri Knife Comes with a fine quality extra thick and robust leather sheath.
  • Up to standard Eagle Kukri Knife comes with a fine quality extra thick and robust leather sheath that has belt inserting loop..
  • Approximately 6 mm Thick Twist pattern Damascus steel. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel . The sheath has belt inserting loop and can be worn on belt.
  • Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock

4 pieces Damascus steel blank blade set, 7, 8, 9 and 9.5, inches long hand forged blank blade skinning knife set, 2.5 to 4.5 inches long cutting edge, compact pocket knife and skinning knife blades

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 32 inches Damascus steel blade..
  • Set Contains: a) 9" long trailing point blade with 4.5" cutting edge. 3 pins holes and a Mosaic hole. b) 9" long drop point blade skinning knife with 4" cutting edge. 3 pin holes. c) 7" long pocket spear point blade with 2.5" cutting edge. 3 pins holes and a Mosaic hole d) 8" long compact straight point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

Single Tab Weld Nut with Target - Spot Weld Nuts #8-32 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (50)

  • C1010 High-Welding Quality, Low Carbon Steel, C1010 High-Welding Quality, Low Carbon Steel.
  • Compare to Buckeye Fasteners SKU: ND 3324.
  • Compare to Paulin Industries Part #: 08-3324.
Check Stock

Bobco Metals Hot Rolled Steel Base Plate A36 6\ X 6\ - 4 Holes 1/2\ Diameter - Rounded Corners - 1/4\ Thick - 8 pcs

  • 1095 blade steel specifications: 1.57 inches wide * 12 inches long * 0.16 inches thick,Weight: 0.8 lb * 3.
  • Create your own custom knife that will last a lifetime. Made from high carbon steel, this AbbottoKaylan knife billet sharpens easily, resists chipping, and holds a great edge..
  • 1095 spring steel is a kind of high carbon steel, which has the characteristics of heat resistance, low temperature resistance, oxidation resistance, corrosion resistance, etc..
  • The highest quality of high carbon steel is 1095, which has a carbon content of 1.03%. After heat treatment, it can reach the hardness of HRc58-60. The toughness is very good, but it is not rust resistant. Large-scale felling knives and military knives such as the American "KA-BAR" army knives during World War II used 1095 as the blade material..
Check Stock

E7018 3/32'' Welding Electrode Rods Carbon Steel Welding Electrode 5Lb for Mild or Low Alloy Steels

  • Material: The package includes 5LB E7018 3/32'' basic carbon steel electrode.
  • Standard: AWS A5.1 E7018 ISO2560-A E42 3 B 1 2 GB/T5117 E5018.
  • Advantage: The E7018 Stick welding rod is a multi-purpose electrode with excellent handling properties. 7018 Arc welding rod performs particularly well when welding mild or low alloy steels such as bridges, construction, shipbuilding and pressure vessel fabrication, to name a few. E7018 Stick electrode can also be used in construction and maintenance of a series of construction machinery such as bulldozers, agricultural or mining equipment.
  • Application：E7018 carbon steel electrode Used to weld the Marine steels (A、B、D、E、AH36、DH36、EH36）and the same grade strength low carbon steel, mechanical performance , impact value can be as high as 150J @ -30 ℃. AC & DC.
  • Service: Fox Alloy Time-proven formulation.
  • A team of experienced welding engineers ready to answer all your welding questions.
Check Stock

World Points 1027 Rose Wood Damascus Kitchen Knife Set Professional 6 Piece, Handmade Damascus Steel Chef Knife Set with Chopper/Cleaver And 6 Pocket Original Leather Roll Bag, WP-1027

  • these blades consists of layers of low carbon and high carbon (1095 and 15N20) mixture welded.
  • The High Grade Damascus steel used for these blades consists of layers of low carbon and high carbon (1095 and 15N20) mixture welded, forged and hammered several times to obtain Up to 200 Layers. The hardness of these blades is up to 56 to 58 HRC on the Rockwell scale providing sharp edges that are designed for lots of use. Precision heat treating methods are employed to provide the sharpest, most enduring edges available. Only quality materials have been used to create this beautiful Knife..
  • How to care for your new knives: - Store in a dry place, moisture encourages rust. Damascus is very easy to clean if rusted but is rust resistant. - After use, wash and dry the blade and apply vegetable oil, or any food safe lubricating oil..
Check Stock

Tojiro DP Damascus 3-piece Knife Set

  • Set Includes: 4" Paring Knife, 6" Utility Knife & 8.25" Gyuto/Chef's Knife.
  • Damascus pattern on each blade is created by forging 37 layers of both low carbon and high carbon stainless steel folded over the thick VG-10 core of premium cobalt alloy steel.
  • Bolster adds heft and balance while the blade and edge is still thin and razor sharp.
  • Micarta handle with three stainless steel rivets.
Check Stock

OHM-07711 Damascus chef knife 5Pcs chef knife set handmade knives hand forged knife kitchen knife set paring knife mothers day gift gift for him birthday gift

  • Sizes From Top to Bottom, Overall: 13 ", 12", 12", 11.5", 9.5" : Handle: 5", 5", 5", 5", 5: Blade: 8", 7", 7", 6.5", 4.5" Thickness: 3mm approx Blade....
  • Handle: Excellent Combination of Natural Rose Wood With Steel Bolster. Product include Custom Made Real Cow Hide Kit Roll..
  • A BEAUTIFULLY HAND FORGED PIECE OF ART: The High Grade Damascus Steel Used For This Blade Consists Of Layers Of Low Carbon & High Carbon Mixture....
  • AN EXCELLENT GIFTING IDEA: Offer this unique hand made Damascus Kitchen Knives Set to a special friend, family member or co-worker and have them....
  • CARE AND MAINTENANCE : This product is combination of high & Low carbon steel so it should need extra care to prevent rust. Best place for storage is....
Check Stock

Large Taco Shell Bowl Maker Molds – 3 Pack 8.4' Nonstick Carbon Steel Tortilla Shell Pans Baking Molds Tostada for Frying Salad Bowls (3)

  • ☛【Larger Size】: 8.4in carbon steel taco shell maker, Much larger than 6.5in common size mold, share more tacos,tortilleras mexicanas para hacer tortillasto family and friend.Have a great time on Taco Tuesday..
  • ☛【Carbon Steel Taco Shell Mold】: The nonstick tortilla bowl great for baking crispy, low-fat tortilla bowls and flavorful, lower calorie, low fat, healthy meals without frying..
  • ☛【Non-Stick】: Made of professional carbon steel pans with premium non-stick coating, nonstick surface for easy food release and clean up, dishwasher safe..
  • ☛【Perfect for Family】: The perfect tortilla pan is great for taco bowls, salads, dips and more, your family will love the perfect tortilla.
  • ☛【Easy to Use】: 1. Just lay a tortilla over the pan, press it into the curves. 2. Bake for 8 to 10 minutes. 3. After a 5-minute cool-down period, fill and enjoy..
Check Stock