Top Low Pressure Die Casting

Jetech Heavy Duty Pistol Grip Grease Gun - 6000 PSI - 14oz Cartridge,Includes 6-Inch Rigid Extension and 2 Couplers

  • Wide Application - Pistol grip grease gun's large capacity: 14oz Cartridge. Working Pressure: 3600 PSI, Max Pressure: 6000 PSI. Widely used to lubricate equipment such as vessels, reapers, excavators, and other heavy equipment..
  • Leakage-free design - The heavt duty grease gun 's oil nozzle adds steel balls to avoid backflow during use. The self-locking device makes it safe and convenient to operate..
  • Study Material - Strong and durable aluminum die-casting alloys grease gun head. Heat-treated high strength inside spring to ensure long-lasting balanced pressure..
  • EFFORT-SAVING DESIGN - The dual-piston design achieves higher efficiency with less effort needed. Ergonomic anti-slip TPR handle offers a comfy grip..
  • LIMITED LIFETIME WARRANTY - Buy with confidence with Jetech's lifetime manufacturer warranty. Terms and conditions apply. The lever-action grease gun with dual piston is guaranteed for 3 months..
Check Stock

SRC40 Swing Clamp Cylinder 90 Degrees Large Rotary Actuator Pneumatic Clamping Cylinder (SRC40x90L)

  • Excellent Material: This pneumatic swing clamping cylinder is made of pure aluminum block through CNC machining center, non-die-casting aluminum, high density and high strength, support long time work..
  • Hard Oxidation Treatment: The mirror inner wall surface of this pneumatic swing clamping cylinder is hard anodized to prolong the service life of the cylinder..
  • Protective Layer: The hard protective layer of this pneumatic swing clamping cylinder is not easy to be worn, not easy to be corroded, and can be used in harsh working environments..
  • Features: This pneumatic swing clamping cylinder has high consistency of water inlet and outlet, quick joint installation, and is not easy to leak.
  • left-turn-L and right-turn-R are optional..
  • Use Pressure Range: The pressure range of this pneumatic swing clamping cylinder is 1-7kgf/cm(Kpa)..
Check Stock

OSOYOO Omnidirectional Mecanum Wheels Robotic Car Kit for Arduino Coding Students Based on Mega2560 Introduction

  • 【Precision die casting】The bevel gears are made of zinc alloy material by accuracy die casting.
  • 【Strong compatibility】The product can compatible with for FRC and other world robot competitions.
  • 【Good quality and durable】High wear resistance, high strength and high rigidity.
  • 【Easy to replace】Including 2 sets of bevel gear and bearings, convenient to replace.
  • 【Exquisite and reasonable】Fine processing and reasonable design, good accessories for industrial robots.
Check Stock

BESPEED Skateboard Trucks 5.25\ Raw Set of 2 Fits 8.0\-8.5\ Decks Pair Aluminum Alloy Polished Hollow Light Weight Standard (Black-Blue, 5.25\)

  • 【Exquisite workmanship】This skateboard hardware adopts aluminum alloy casting and die-casting process, medium carbon steel hardening treatment, and metal baking paint, which enables the scooter to withstand greater weight and pressure..
  • 【Suitable for Beginners】This skateboard trucks and wheels set has a hardness of 95a and a rebound rate of 60%, which is very suitable for beginners. The hardness is too high and it is easy to slip, so don't worry about the wheel cracking..
  • 【Superior Performance】This skateboard trucks adopts 608 standard ABEC-9 skateboard bearing, the excellent bearing can rotate continuously for 30 seconds without load, giving you an unprecedented smooth feeling..
  • 【Applicable Models】This skateboard trucks fits 7.5-8" skateboard decks, and the skateboard set fits all 7.5 to 8" skateboard decks..
  • 【Skateboard Parts Set】 Set includes Scooter 5.0, Skateboard Wheel 52mm, Skateboard Bearing ABEC-9, Skateboard Screw 1.
Check Stock

IKO Clad Ceramic Skillet 8 Satin

  • 【Swiss Nonstick Coating】- 3 layers of non stick coating imported from Switzerland, unique ball throwing technology, uneven nonstick surface with....
  • 【Easy to Clean】- Nonstick egg pans are easy to clean. Just wipe with a paper towel or rinse with water. One-piece design with no rivets inside to....
  • 【Integral Die Casting Pan】- The nonstick fry pan is made of 1200°F high temperature aluminum water die casting, which is durable and warp-proof,....
  • 【Stay Cool Woodgrain Handle】- The non-stick pan has a wood grain bakelite handle, which is comfortable to grip and ergonomic, and keeps it cool....
  • 【Multipurpose Frying Pan】- Non stick frying pan with lid is designed for multiple cooking needs, suitable for all stoves, gas, ceramic, electric,....
Check Stock

Tagine Pot Aluminum Alloy Non‑Stick Cooking Pot for Induction Cooker Gas Stove Green Tagine Pot

  • Non-stick tagine pot is clean after flushing, easy to clean, saving time and water..
  • Steam circulation, heat storage and insulation, heightened arch cover, gather gas and lock water..
  • Cooking pot is tightly closed, which has air holes to exhaust, and refuse tosplatter..
  • Tagine pot is made of high‑quality aluminum alloy, containing nano‑level silver ions..
  • Steam cycle/micro‑pressure quick‑cooking, thick die‑casting/long‑term use without convex bottom, compatible with all kinds of stove..
Check Stock

Tagine Pot Aluminum Alloy Non‑Stick Cooking Pot for Induction Cooker Gas Stove Green Specialty Cookware

  • Non-stick tagine pot is clean after flushing, easy to clean, saving time and water..
  • Steam circulation, heat storage and insulation, heightened arch cover, gather gas and lock water..
  • Cooking pot is tightly closed, which has air holes to exhaust, and refuse tosplatter..
  • Tagine pot is made of high‑quality aluminum alloy, containing nano‑level silver ions..
  • Steam cycle/micro‑pressure quick‑cooking, thick die‑casting/long‑term use without convex bottom, compatible with all kinds of stove..
Check Stock

TCP Global 10 Gallon (38 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels, Regulator, Gauge - Use for Curing Resin in Casting Molds

  • Professional heavy-duty 10 gallons (38 liters) capacity pressure pot tank for resin casting. The tank has a maximum operating pressure of 50 PSI. Holds the air pressure constant at your regulated air pressure setting during the whole casting mold resin curing process..
  • The pressure pot tank is constructed with heavy gauge steel and has a durable easy to clean powder coating. It has a 14.5″ inside diameter and is 17″ deep, so it has a large enough capacity to accommodate almost any casting project. Includes 4 removable caster wheels..
  • Tank has a clamp-on lid with an airtight sealing gasket. The lid has an air pressure regulator with air inlet shut off ball valve, air pressure gauge from 0 to 100 psi, safety air relief valve and an air release outlet cock valve..
  • The ideal pressure pot tank for inserting resin casting molds and holding them under pressure so that you can make high quality virtually bubbleless resin castings..
Check Stock

DC 12V Portable Fish Tank Pond Aquaculture Hydroponics Aquarium Air Pump Compressor Aerator 100W 105LPM/Min, Oxygen Supplies

  • ★OUTSTANDING PERFORMANCE - Multi-purpose portable aquarium air pump can provide pressure inflatable. Use is very convenient. Quality and workmanship are very superb, in line with international standards. Without oil lubrication, it is clean compressed air..
  • ★MULTI-FUNCTION - The product is using energy-saving, high efficiency permanent magnet DC motor as the driver, with aluminium alloy shell by die-casting machine, compact structure, small size, light weight and easy to carry, making it the ideal tool for your athletic balls or aquarium(12 volt). OUTPUT: 105LPM /Min POWER: 100W VOLTAGE: DC 12V.
  • ★METAL PORTABLE AQUACULTURE AIR PUMP - Internal parts and cables are 100% copper, direct-drive motor makes the drive low rotating speed, high efficiency, compact, quiet and stability, and easy to control..
  • ★EASY TO INSTALL - Easy setup and operation, safe and stable.
  • Intelligent, energy saving, environmental protection. Be suitable for living fishes in vehicles, restaurants and industry. Hydroponics, Aquariums, Fish Farms and Hydroponic Systems, Dusting, Inflation, Manufacture. It's also used for air supply to spare parts of....
Check Stock

HFS R Two Axis Welding Clamp Angle Clamps Aluminium Max Open 2-3/4 Width 3-1/2 Depth 1-1/3

  • [MATERIAL]: Aluminum alloy die casting clamp body.Surface spray treatment.
  • [OPERATION METHOD]: First of all, rotate the handle to fix and press the corner of the square pipe, and then weld.
  • [STRONG AND DURABLE]: Because the clamp body is made of aluminum alloy die casting, it is strong and durable, with long service life and can be....
  • [APPLICATION]: Very suitable for aligning and fixing work pieces, for welding perfect 90 degree angles on square tubes..
Check Stock

The Following Instructions Game

  • Authentically licensed product from the Fast & Furious Saga..
  • As seen in The Fast & The Furious, Dom's 1970 Dodge Charger has been taken directly from the big screen and brought to you in a 1:32 scale die - cast model.
  • Crafted from durable materials such as 100% die - cast metal and premium rubber tires..
  • Our high - end casting method allows for feature rich details, such as opening doors..
  • This premium die - cast model is a must have for any Fast & Furious collection.
Check Stock

Legend 350-406 Square Head Pipe Plug, 1-1-4', Threaded, Class 150

  • Brand Name|Legend Valve & Fitting#MFR Part Number|350-406#UPC|662545025223#UNSPSC|40173506#Item|Pipe Plug#Type|Square Head#Nominal Size|1-1-4 Inch#End Style|Threaded#Pressure Class|Class 150#Working Pressure|150 psi#Method of Manufacture|Cupola Casting#Material|Malleable Iron#Material Specification|ASTM A197#Finish|Galvanized#Color|Black#Industry Standards|ANSI B16.3, ANSI B1.20.1#Temperature Rating|200 deg F#Standard-Approvals|NSF 372 Standard, UL Listed, UPC-IAPMO#Application|For Low Pressure.
Check Stock