Top Low Temperature Ball Valve

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
  • There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8” male NPT threaded on one end and a 1/4” female....
Check Stock

Tool Daily High Pressure Washer Ball Valve Kit, 3/8 Inch Quick Connect for Power Washer Hose, 4500 PSI

  • High pressure ball valve has 3/8’’ quick connector and 3/8’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • The max working pressure is 4500 PSI. The max working temperature is 158 F..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
  • Quick Disconnect Fitting: 3/8’’ quick coupler plug + 3/8’’ male NPT thread.
  • 3/8’’ quick coupler socket + 3/8’’ male NPT thread..
Check Stock

MASTERCOOL 58490-YF Universal R1234yf Valve Core Remover/Installer Master Kit Brass,Silver,Red,Blue

  • PERFECT TOOL for replacing damaged valve cores with R1234yf refrigerant in the system without losing the systems charge.
  • ATTACHES TO R1234yf SERVICE PORTS to quickly and easily remove and replace valve cores without the loss of refrigerant.
  • BALL VALVE DESIGN with stainless steel ball provides smooth movement and durability.
  • KIT COVERS 17 mm and 14 mm high and low side service ports.
  • INCLUDES standard valve core shaft, GM large bore valve core shaft, Eaton R134a/R1234yf high side valve core shaft, low side 14 mm connector, high....
Check Stock

3/4\ NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle (1-Pack)

  • 3/4" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
  • Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
  • 3/4" Threaded IPS Lead Free Brass Water Cut off Ball Valve.
  • Size: 3/4" IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
  • IAPMO Listed to cUPC - "Lead-Free" Compliant.
Check Stock

Aupoko R134A Valve Core Quick Remover Installer, High Low Pressure Valve Core Remover Tools Kit for R13A Refrigerant Air Conditioner System

  • ★ USEFUL TOOL KIT ---- This valve core remover tools Kit includes high pressure (Red) and low pressure valve core quick remover installer, 1 pc valve core remover, 5pc R134a valve cores and 5pc 5V1 valve cores..
  • ★ HIGH & LOW PRESSURE QUICK COUPLER ---- High pressure coupler (Red), with inner diameter 16 mm, and Low Pressure coupler (Blue) with inner diameter 13 mm..
  • ★ ADJUSTABLE ---- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
  • ★ WELL-DESIGN ---- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
  • ★ 1 YEAR WARRANTY ---- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
  • easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, should be there any question, please feel free to contact us..
Check Stock

EZ-FLUID 1-1/2 NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle 1-Pack

  • 1-1/2" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
  • Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
  • 1-1/2" NPT Threaded IPS Lead Free Brass Water Cut off Ball Valve.
  • Size: 1-1/2" NPT IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
  • IAPMO Listed to cUPC - Certified to NSF 61-G - "Lead-Free" Compliant.
Check Stock

AOMAG 3/8" Electric Solenoid Valve 12V DC, VITON Gasket, Air, Gas, Fuel Normally Closed

  • ....) - The solenoid’s magnetic field with directly moves the plunger and close the orifice for any fluid or gas flow. Only opens while energized..
  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • 1/4" NPT (USA National Pipe Thread). Commonly used standard pipe thread in US...
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 6 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our AOMAG Motorized Ball Valves..
Check Stock

ERA SCH 80 PVC 6" COMPACT BALL VALVE (SOCKET)

  • Super easy to open & close - Much easier to operate than original valve with short T-handle. (Review from many buyers)..
  • One-piece ball valve design - There are no redundant joints to minimize water leakage, excellent industrial design..
  • Technical parameter - Withstand a working pressure of 150 PSI and a maximum temperature of 140 °F. Fits for 1" Schedule 40 PVC Pipe..
  • Ideal PVC ball valve for your project - Select a high-quality valve for your water project to reduce the cost of later maintenance..
  • Wide application scenarios - This valve is applicable to a variety of work sites, suce as swimming pools, sewage pipes, sprinkler irrigation system, agricultural irrigation system, and can work even in harsh environments..
Check Stock

1 Inch Ball Valve, Premium 304 Stainless Steel Full Port Forged NPT Ball Valve for Water Oil and Gas with Long Handle Shut Off Switch, 1000 WOG ( 1 Piece, FNPT to FNPT )

  • ...ality 304 stainless steel, lead free, Safer and stronger, long lifetime. It is the ideal plug valve for high quality shut- off valves in industry or in the home and garden..
  • Suitable for a variety of media: The high-quality stainless steel ball valve is suitable for water, sea water, air, oil, and steam media with a temperature of -10 ℃～120℃.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
  • Convenient operation: This high pressure 1 inch ball valve has a comfortable operating handle, which opens and closes quickly. It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Good sealing: It has two sealing surfaces with good sealing performance and can achieve complete sealing. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when the medium passes..
  • Widely used: Ball valves are widely used in gardens, water pumps, corner ....
Check Stock

DAN SPEED 2 NPT Female 316 Stainless Steel Full Port Ball Valve Vinyl Handle WOG1000

  • Body & Ball Type:Full Port, Low Operation Torque,316 Stainless Steel.
  • Serviceable Valve - Can be taken apart via threads, Female NPT Ports.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.
  • Nominal Working Pressure:1000 WOG, Max 1000 psi for Water, Oil, Gas, Temp Range:-60F to 450F,Fluid Medium For use with liquids and gases.
Check Stock

VARMHUS NPT Female 316 Stainless Steel Full Port Ball Valve Vinyl Handle WOG1000 (1-1/2")

  • Body & Ball Type:Full Port, Low Operation Torque,316 Stainless Steel.
  • Serviceable Valve - Can be taken apart via threads, Female NPT Ports.
  • The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
  • This multi-purpose manual lever ball valve has excellent corrosion resistance and is fit for many applications.
  • Nominal Working Pressure:1000 WOG, Max 1000 psi for Water, Oil, Gas, Temp Range:-60F to 450F,Fluid Medium For use with liquids and gases.
Check Stock

Gralara High Pressure Washer Ball Valve Quick Connector High Pressure Resistance for Agricultural Irrigation, 1 of 4inch

  • STURDY DESIGN: Made of durable steel material, this ball valve is specifically designed for pressure washing machine hoses that need to handle high pressure ratings up to 4500 PSI and a maximum temperature of 60 degrees Celsius..
  • VERSATILE: Perfect for car wash, patio, siding, and deck cleaning jobs, this high-pressure washer valve switch makes cleaning tasks quick, easy, and efficient..
  • QUICK CONNECTOR: This high pressure washer ball valve kit comes with a 3/8" quick connector and plug for easy attachment to your sprayer, nozzles, pumps, and hoses..
  • COMPATIBILITY: The adapter's thread size is 3/8 NPT, not G 3/8 (3/8 BSP)..
  • EASY TO USE: This ball valve switch is designed for easy opening and closing, and provides tremendous leverage under high pressure..
Check Stock