Top Low Viscosity Shade

Amsoil Synthetic Marine Gear Lube 75W-90 (1 Quart)

  • Less slippery low sulfur formula compatible with brass synchronizers.
  • Stable at high temperatures in performance applications.
  • Also available as lighter viscosity like MTL and MT-85.
  • Satisfies gear oil viscosity requirements of 75W.
Check Stock

The Enchanted Files: Cursed

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

Promare [Blu-ray]

  • 【Precise filling control】6 Heads Liquid Filling Machine have Precise filling control, measurement range: 3ml-5000ml, Anti-drip filling head design, more accurate quantitative.
  • 【Corrosion Resistance】The pump of this product is diaphragm pump, the main materials of the pump body are PA and PPS. Not suitable for items with strong corrosiveness and high acidity. Only suitable for filling with a pH of 5-9, low foam, no particles, and low viscosity liquid..
  • 【 High-quality stainless steel material】 Food grade stainless steel body, good quality.
  • 【NOTE】 The machine has been transported or stored for a long time, and the pre-stored water in the diaphragm pump has dried up, resulting in reduced suction. Fill a container with clean water and put it at a level higher than the machine level. Remove the feed inlet check valve and the outlet nozzle, put the feeding side into the container, adjust the speed to the maximum, press the jog to pump to the water, then install back.
  • 【Application】Suitable for mineral water, beverages, food, condiments, oil bodies, daily cosmetic liquids, and other low viscosity emulsion products..
Check Stock

Professional Grade CA Super Glue by CYAPRO, Fast Curing Adhesive 2 oz, Low Viscosity, Thin Cyanoacrylate Adhesive for Woodworking, Hobby, Plastic, Ceramic & Metal, transparent

  • Professional Grade Cyanoacrylate Super Glue: CYAPRO cyanoacrylate adhesives offer the best bonding performance, thin, low viscosity super glue will usually give you the bond you need in less than 5 seconds.
  • Instant CA Glue: Low viscosity CA glue, also known as instant CA glue, has a viscosity of 2-5 CPS and provides ultra-fast bonding and deep penetration for repairing small holes and cracks.
  • Precise Micro-Tips Fittings: CYAPRO Super Glue comes with 3 micro-tips fittings to perfectly repair tiny cracks and to assist in controlling the amount used during application. Extra applicator and anti-clogging cap with microneedle on top of the applicator to prevent clogging.
  • Suitable for Multiple Materials: Our CA glue is suitable for wood, metal, rubber, leather, ceramics, gemstones, rocks and minerals, carbon fiber, fiberglass, PVC and most plastics. It is the best choice for DIY enthusiasts, modelers, carpenters and model enthusiasts.
  • WARNING: Do not use on fabric and always wear goggles. Keep out of direct sunlight and store in a cool, dry place.
Check Stock

CGOLDENWALL NDJ-5S Rotary Visometer Digital Rotational Viscosity Meter Lab Viscometers 110-240V 1-100,000mPa.s Accuracy:±3.0% (With 0# rotor)

  • High Measuring Accuracy: Measurement range: 1mPa.S-100,000mPa.S (1mPa.S=1cp) Measurement error:±3%, with 5 rotors (No. 0,1, 2, 3, and 4) and 4 speeds (6, 12, 30, 60 rpm), which are composed of 20 combinations. You can determine viscosity as low as 1mPa.s with 0# rotor. If you need Thermometer Probe, you can search B08CHFGVP5.
  • Microcomputer Control Technology: Adopts advanced mechanical design, manufacturing technology and microcomputer control technology.This lab viscometers can be customized the data storage function. If you need output data to a computer, we will customize it for you.If you need calibration certificate, please also contact us.
  • LCD Digital Display:Has perfect data acquisition,can display the number of rotors, speed, viscosity, and percentage at the same time.
  • the LCD display uses high-brightness blue backlight to display the results more clearly..
  • Reliable and Easy to use: Has a measurement of high sensitivity, so the test results are reliable, and also, the operation is very easy.With automatic search function, when you don't know what rotor and speed to choose, it can quickly help you find the right rotor and speed.
  • Application: This rotary viscometer can be used to measure the absolute viscosity of the Newtonian liquids and the appa....
Check Stock

Red Line 57904 75W90 Synthetic Gear Oil - 1 Quart

  • Less slippery low sulfur formula compatible with brass synchronizers.
  • Stable at high temperatures in performance applications.
  • Also available as lighter viscosity like MTL and MT-85.
  • Satisfies gear oil viscosity requirements of 75W.
Check Stock

Jewelry Drills, Electric Easy Operation Wide Use Resin Drill Set for Crystal for Pearl(with American Plug (Plug Voltage AC 100-240V))

  • Medium Infusion Epoxy is a two-component, very low viscosity system developed specifically for use in resin infusion and VARTM processes..
  • Medium Infusion Epoxy was formulated to provide for rapid saturation of carbon fiber laminate, fiberglass, and Kevlar..
  • Processability parameters are enhanced due to Medium Infusion Epoxy’s low mixed viscosity and wet-out potential..
  • This system is not designed to be used in open mold applications..
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105A Epoxy Resin (32 fl oz), 205A Fast Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock

CGOLDENWALL NDJ-5S Digital Rotational Viscosity Meter Viscometer Rotary visometer 110-240V 10~100,000mPa.s Accuracy:+-3.0% (Old or New Panel)

  • High Measuring Accuracy: Measurement range: 10mPa.S-100,000mPa.S(1mPa.S=1cp) Measurement error:±3%, with 4 rotors (No. 1, 2, 3, and 4) and 4 speeds (6, 12, 30, 60 rpm), which are composed of 16 combinations. You can determine viscosity as low as 1mPa.s with 0# rotor..
  • Microcomputer Control Technology: Adopts advanced mechanical design, manufacturing technology and microcomputer control technology.
  • LCD Digital Display: Has perfect data acquisition and the LCD monitor display selected blue backlit with high brightness so that it can show the results more clearly. Note: In order to provide a better user experience, we upgraded the product label. The product you received may be the old version or the new version.
  • Reliable and Easy to use: Has a measurement of high sensitivity, so the test results are reliable, and also, the operation is very easy..
  • Application: It can be used to measure the absolute viscosity of the Newtonian liquids and the apparent viscosity of the Non-Newtonian liquid. Also can be widely used in the tests the viscosity of the oil, paint, plastics, paints, detergents, drugs, jewelry and other objects..
Check Stock

m.2 Thermal pad Kit，Pcie Thermal pad, M2 2280 NVMe Thermal pad…

  • 【Dimensions】- thermal pad fits for M.2 2280 SSD (22 x 80mm) Heatsinks..
  • 【 Item Size】 70 x 20 x 0.5mm,70 x 20 x 1mm,70 x 20 x 1.5mm,70 x 20 x 2mm..
  • 【Soft and Low Viscosity】- Soft enough and good ductility, compatible with uneven surface of the M.2 SSD. Low viscosity, with no damage to the SSD warranty label..
  • 【Safe and easy to use】– Made from unique Nano Silicon Grease Material, with good thermal conductivity ability. Remove the protective films on both sides of the thermal pad and put it under the M.2 SSD Heatsink..
  • 【 Wide Compatibility】 Compatible : 850EVO / 860EVO / 960EVO / 970EVO / 950PRO / 960PRO / 970PRO / SM951 / SM961 / PM951 / PM961 / CM871a / PM871 / PM981 / XP941, no cutting required..
Check Stock

Motul 105776 Set of 4 Dexron III Automatic Transmission Fluid 1-Liter Bottles

  • For use in all systems where DEXRON or MERCON standard is required. // For automatic gearboxes/torque converters/power steering systems/boat reversing gears/hydrostatic transmissions/hydraulic or mechanical systems that require DEXRON or MERCON standards..
  • MOTUL DEXRON III can be used (and mixed) for applications where DEXRON/B DEXRON/DEXRON II D/DEXRON IIE/DEXRON III is required..
  • Technosynthese ATF features more fluid at low temperature than Dexron IIE oils, which allows easier gear change in cold weather..
  • Higher oxidation resistance than Dexron IIE standard. // Oil film stability under high temperature. // Anti-wear, Anti-corrosion, Anti-foam..
  • Color: Red. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/33.4 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/7.2 mm²/s. // Viscosity Index: ASTM D2270. // Flash Point: ASTM D92/204°C/399°F. // Pour Point: ASTM D97/-48°C/-54°F..
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • BUNDLE INCLUDES: West System 105B Epoxy Resin (126.6 fl oz), 205B Fast Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
Check Stock