Top Low Voltage Disconnect 12vs

60 amp MPPT Charge Controller 12V/24V/36V/48V, Solar Charge Controller mppt Max 160VDC Input LCD Backlight Solar Charge for Sealed Gel AGM Lithium Battery

  • 60A MPPT Charge controllelr, 100% MPPT 60A solar charge controller Intelligent, Max efficiency ≥98.1%, PV utilization ≥99%.Built-in DSP controller with high performance Automatic battery voltage detection 12V/24V/36V/48V, Make sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller..
  • Fit for 12V/24V/36V/48V battery, USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Flooded/Sealed/Gel battery, User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer..
  • Built-in cooling fan, Fan will ON when temperature 003e45℃ and off 003c 40℃,Porous heat dissipation and fan use BEARING technologies increase life UP TO 5000hrs in normal use..
  • Very detail display with Blacklight---LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature, ☀ TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters..
Check Stock

Juried Engineering LM386N-4/NOPB LM386N-4 LM386 Wide Input Voltage Low Power Audio Amplifier with Internal Gain DIP-8 Breadboard-Friendly (1 Piece)

  • Excellent Power amplifiers designed for use in low voltage applications.
  • Battery Operation, Minimum External Parts, Ground-Referenced Input Self-Centering Output Quiescent Vol.
  • Wide Supply Voltage Range: 4 V–12 V or 5 V–18 V.
  • Low Quiescent Current Drain: 4 mA, Low Distortion: 0.2% (AV = 20, VS = 6 V, RL = 8 Ω, PO = 125 mW, f = 1 kHz), Voltage Gains from 20 to 200.
  • Example Applications: AM-FM/Satellite Radio Amplifiers, Portable Music Player, Amplifiers, Intercoms, TV Sound Systems, Line Drivers, Ultrasonic Drivers, Small Servo Drivers, Power Converters.
Check Stock

Juried Engineering LM386N-4/NOPB LM386N-4 LM386 Wide Input Voltage Low Power Audio Amplifier with Internal Gain DIP-8 Breadboard-Friendly (Pack of 5)

  • Excellent Power amplifiers designed for use in low voltage applications.
  • Battery Operation, Minimum External Parts, Ground-Referenced Input Self-Centering Output Quiescent Vol.
  • Wide Supply Voltage Range: 4 V–12 V or 5 V–18 V.
  • Low Quiescent Current Drain: 4 mA, Low Distortion: 0.2% (AV = 20, VS = 6 V, RL = 8 Ω, PO = 125 mW, f = 1 kHz), Voltage Gains from 20 to 200.
  • Example Applications: AM-FM/Satellite Radio Amplifiers, Portable Music Player, Amplifiers, Intercoms, TV Sound Systems, Line Drivers, Ultrasonic Drivers, Small Servo Drivers, Power Converters.
Check Stock

Juried Engineering LM386N-4/NOPB LM386N-4 LM386 Wide Input Voltage Low Power Audio Amplifier with Internal Gain DIP-8 Breadboard-Friendly (Pack of 20)

  • Excellent Power amplifiers designed for use in low voltage applications.
  • Battery Operation, Minimum External Parts, Ground-Referenced Input Self-Centering Output Quiescent Vol.
  • Wide Supply Voltage Range: 4 V–12 V or 5 V–18 V.
  • Low Quiescent Current Drain: 4 mA, Low Distortion: 0.2% (AV = 20, VS = 6 V, RL = 8 Ω, PO = 125 mW, f = 1 kHz), Voltage Gains from 20 to 200.
  • Example Applications: AM-FM/Satellite Radio Amplifiers, Portable Music Player, Amplifiers, Intercoms, TV Sound Systems, Line Drivers, Ultrasonic Drivers, Small Servo Drivers, Power Converters.
Check Stock

Juried Engineering LM386N-4/NOPB LM386N-4 LM386 Wide Input Voltage Low Power Audio Amplifier with Internal Gain DIP-8 Breadboard-Friendly (Pack of 10)

  • Excellent Power amplifiers designed for use in low voltage applications.
  • Battery Operation, Minimum External Parts, Ground-Referenced Input Self-Centering Output Quiescent Vol.
  • Wide Supply Voltage Range: 4 V–12 V or 5 V–18 V.
  • Low Quiescent Current Drain: 4 mA, Low Distortion: 0.2% (AV = 20, VS = 6 V, RL = 8 Ω, PO = 125 mW, f = 1 kHz), Voltage Gains from 20 to 200.
  • Example Applications: AM-FM/Satellite Radio Amplifiers, Portable Music Player, Amplifiers, Intercoms, TV Sound Systems, Line Drivers, Ultrasonic Drivers, Small Servo Drivers, Power Converters.
Check Stock

ORCISH Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps for Recovery Winch or Trailer (White)

  • Wide applications: the battery quick connector provides simple and convenient method for connect disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
  • Package comes with 6 sets 6-10 gauge battery quick connector, including 6 connectors, 12 terminal pins, 6 caps, enough quantity to meet your different needs or replacement.
  • Quality material: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, moisture, have long service time.
  • Easily installation: you can install these battery cable quick connector disconnect plug quickly, insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
  • Stable working environment: there are 12 terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to ensure stable voltage and current.
Check Stock

Buachois 2 Sets 50A 6AWG 600V Battery Connector Plug Lightweight Quick Connect Disconnect Wire Harness Plug Kit Towing Winch Quick Connect Systems(Black)

  • Wide range of applications: the battery quick connector provides simple and convenient method for connect disconnect power to a winch or other electrical device such as remote battery chargers, power inverters, solar setups, trailers, or for any other purpose requiring a high-current, quick-disconnect connector.
  • Size information: voltage: 12-36 volts DC.
  • package comes with 6 sets 2-4 gauge battery quick connector, including 6 connectors, 12 terminal pins, 6 caps, enough quantity to meet your different needs or replacement.
  • Quality and durable material: the battery quick connector plug is made of sturdy PC fire-retardant material with fitted rubber boot covers to protect against dust, moisture, have long service time.
  • Convenient installation: you can install these battery cable quick connector disconnect plug quickly, insert the wires into the terminal pins, and then solder or crimp them, connector ends are identical, so either ends are suitable for connection to the power or load side.
  • Stable working environment: there are 12 pieces terminal pins made of red copper coated with silver have strong electrical conductivity and reduce the resistance to ensure stable voltage and current.
Check Stock

Sunway Solar Panels Charge Controller 12V Battery Regulator 7A for Safe Protection of 12Volt Solar Power Battery Charger Solar Trickle Charger & Maintainer and Solar Powered System Kit

  • [For 12V DC Solar Systems]--This 7A solar battery charge Regulator use only for 12 volt DC solar power systems, solar panels and 12 volt rechargeable....
  • [Solar Power Input 100W Max.]--Max. input Voltage:22Volt DC, Max. Current:7 AMP, solar Panel 100 Watt Maximum. Power Output: 12 VDC Battery. It can....
  • [LED Indicators For Easy Monitoring]--This solar battery controller integrated with 3 LED indicators（green.yellow,and red） for low voltage(over....
  • [Quick and Easy Connection]--This solar battery charger controller coming with Versatile quick connect and quick disconnect clips SAE Plug Cable,....
  • [Full Protection and More Safe]--This solar charging regulator protects over charge protection, over discharge protection, over load protection. {If....
Check Stock

Maddog Heavy Duty Paintball Tank Remote Coil - Compressed Air (HPA) / CO2

  • Choose Quick Disconnect, Slidecheck, or Pro Push-Button Quick Disconnect.
  • Move the BULK weight of the tank OFF your marker and into a pouch!.
  • Designed to work with co2 tanks, 3000 psi, and 4500 psi HPA systems.
  • CA Adapter attaches to any paintball marker Including Tippmann TMC, 98, A5, X7, Cronus, Alpha Black, Alpha Black elite, TCR, Stryker, Stormer. Spyder Fenix, Victor, Agressor, Xtra, Compact, VS Series, JT, Brass Eagle and More.
  • Remote Works with all standard paintball tanks including HPA/Compressed Air, 13/3000, 26/3000, 35/3000, 48/3000, 62/3000, 45/4500, 50/4500, 68/4500, 70/4500, 80/4500, 88/4500 & 90/4500. Also Works with standard CO2 tanks 4oz, 9oz, 12oz, 16oz, 20oz and 24oz. And many Airsoft HPA Setups..
Check Stock

UpBright New 12V AC/DC Adapter Compatible with Obihai OBi100 OBi110 OBi200 OBi202 OBi300 OBi302 OBi504 OBi504vs OBi508 OBi508vs Voice Service Bridge VoIP Telephone Adapter 12VDC Power Supply Charger

  • World Wide Input Voltage 100-240VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection). Tested Units. In Great Working Condition. UpBright 30 days money back guarantee. 1 full year service warranty..
  • UpBright New Global 12V AC / DC Adapter Compatible With Obihai OBi100 OBi110 OBi200 OBi202 OBi300 OBi302 OBi504 OBi504vs OBi508 OBi508vs Voice Service Bridge VoIP Telephone Adapter 12VDC 12.0V Power Supply Cord Cable PS Charger Mains PSU.
  • Compatible With Obihai OBi300 OBi302 Voice Service Bridge VoIP Telephone.
  • Obihai OBi504 OBi504vs OBi508 OBi508vs Universal Telephone Adapter.
Check Stock

Chanzon 5mm IR Infrared LED Diode Emitter + Receiver 940nm Sender Reciver Kit + VS1838B 1838 Sensor Ray Night Vision 940 nm 20pcs Lighting Lamp Bulbs Assortment for Arduino Raspberry

  • Overview: 10pcs 940nm Sender with Emitting Angle 45 Degrees, 5pcs 940nm Receiver with Receive Angle 30 Degrees, 5pcs HX1838 VS1838B TL1838 Receiver with Receive Angle 70 Degrees.
  • Emitter Voltage: 1.2-1.5V,Receiver VS1838B Voltage:3V-5V, Through Hole DIP 2pins 5mmled LEDs Set Transmitter Lights.
  • Shipping Weight: 0.65oz / 0.018kg Pack of 20 20pcs Leddiode Infra Red Photodiode.
  • Compatible with: Electronic devices, Phototransistor, Communication equipment, IR beam sensors, detector, Infrared Remote, DIY PCB Circuit, Throwies,Arduino, Raspberry Pi, Hobby, Science Experiments,Breadboard,Camera,Remote.
  • vs 1838b High Sensitive,Low forward voltage Assorted.
Check Stock

PowMr MPPT Charge Controller 60 amp 48V 36V 24V 12V Auto - Max 160VDC Input LCD Backlight Solar Charge for Vented Sealed Gel NiCd Lithium Battery【Software Update Version】(MPPT-60A)

  • ...sure batteries' voltage more than 12V to boost controller and make sure battery has enough power to Self-detection when connected to the controller..
  • ❷Fit for USER(can be set Lithium, Lifepo4, Li(NiCoMn)O2)/Vented/Flooded/Sealed/Gel/NiCd battery.User programmable for absorption voltage/Floating voltage/Low voltage disconnect./Load Timer. Real-time energy recording..
  • ❸Blacklight LCD Dispaly PV voltage/output power/Battery voltage/charging current/working mode/Temperature, ☀ TROUBLESHOOTING function and LCD display and can help users not only check the whole system operating data and statuses but also quickly identify system faults and modify parameters..
  • ❹Intelligence Fan-on temperature 003e45℃ and off 003c 40℃,Porous heat dissipation.and fan use BEARING technologies increase life UP TO 5000hrs in normal use..
  • ❺【What You Get】we consider that the larger diameter of the wire will be greater cost for customers, so we designed two connectors for each pos and negs on solar and batteries connectors. copper wires:9AWG.Hope you love it..
Check Stock