Top Low cost Skateboard Bearings

VJ 5.25 139mm Skateboard Trucks Silver Skateboard Wheels 54mm Skateboard Bearings Skateboard Pads Skateboard Hardware 1.25 54mm White

  • SKATEBOARD PARTS SET: It includes skateboard trucks 5.25 (139mm), skateboard wheels 54mm, skateboard bearings Abec 7, skateboard screws 1.25",....
  • MID-SIZED SKATEBOARD TRUCKS, These are 5.25inch hanger 8inch Axle aluminum trucks w/ 90a hardness bushings and 4-hole baseplates, which will fit the....
  • GOOD ALL-PURPOSE SKATEBOARD WHEELS, Our wheels 52mm, 53mm, and 54mm are 99a durometer which are easy to get off the ground. They are hard wheels and....
  • 608 STANDARD ABEC 7 SKATEBOARD BEARINGS, These skateboard bearings are the most common 608 industry standard and match up with nearly every skate....
  • SUITABLE FOR 8"-8.25" SKATEBOARD DECK, This skateboard set fits all 8” to 8.25" skateboard decks. We suggest you use a skateboard tool or wrench and....
Check Stock

VJ Skateboard Truck and Wheel 5.0 Skateboard Trucks Silver w/Skateboard Crusier Wheel 60mm Skateboard Bearings Skateboard Screws Skateboard Riser Pads Black

  • SKATEBOARD PARTS SET: It includes skateboard trucks 5.0 (127mm), skateboard wheels 60mm, skateboard bearings Abec 7, skateboard screws 1.25",....
  • MID-SIZED SKATEBOARD TRUCKS, This is 5inch hanger 7.6inch Axle aluminum trucks w/ 90a hardness bushions and 6-hole baseplates, which will fit both the....
  • SKATEBOARD CRUISER OLD SCHOOL WHEEL, Our skateboard wheel 60mm is soft-mid hardness, for riders skating longboards, old-school boards, downhill, and....
  • 608 STANDARD ABEC 7 SKATEBORD BEARINGS, This skateboard bearings is most common 608 industry standard and match up with nearly every skate wheel. The....
  • SUITABLE FOR CRUISER AND OLD SCHOOL DECK, This skateboard truck and wheel set fits all 7.8” to 10" width skateboard cruiser and old school decks. We....
Check Stock

608-2RS Ball Bearings 608-2RS High Speed ABEC-9 Skateboard Bearings for Blenders, Skateboards,Scooters, Spinners, Roller 608 Skateboard Bearing 20 pcs

  • -Material: Chrome steel, ABEC-9 high precision, durable, move smooth, high speed Skateboard Bearing.
  • -Package Included: 20 pcs 608-2RS High Speed ABEC-9 Skateboard Bearings.
  • -Size: 608 Skateboard Bearing 8x22x7mm, I.D.=0.31 inch / 8mm.
  • -Revolutions Per Minute (RPM) limit of 34,000 with grease lubrication high speed Skateboard Bearing.
  • -Application: 608 ball bearing used in skateboard, roller skates, wheel bearings, Skateboard Bearing.
  • Included components: 20pcs 608 Skateboard Bearings.
Check Stock

fshihine Skateboard Trucks Set, Include Skateboard Wheels 52mm, Skateboard Bearings, Skateboard Tool, Skateboard Pads, Skateboard Grip Tape Hardware Combo Set for Longboard Skateboard Screws Kits

  • ▶Skateboard Trucks And Wheels Set For Beginners◀ This skateboard parts kit includes skateboard trucks 5.0, 4 skateboard wheels 52mm, skateboard bearings ABEC-11, practical T-tool, skateboard screws 1", skateboard riser pads 2mm, skateboard spacer, 33"x9" Skateboard Grip Tape, Abrasive Belt Cleaner..
  • ▶Durable Standard Skateboard Trucks◀ Made of Aluminum, durable trucks for cruising or tricks. 5inch hanger, 7.6 inch axle, with 100A hard bushing and 6 base plate holes, fits well in standard double kick concave decks..
  • ▶High-Quality Skateboard Wheels◀ The 52mm wheels are suitable for beginners when playing short longboard or cruising. It can be using all ground, ramps, sidewalk, smooth concrete or asphalt. They are hard wheels and will give you good control for tricks and mobility..
  • ▶Outstanding Bearings◀ High precision ABEC-11 Skateboard bearings, Practical T-tool, and standard skateboard hardware, skateboard screws 1", waterproof skateboard grip tape. We suggest you use a skateboard tool or wrench and screwdriver for assembly. It is not possible to fully screw in the nut with just your hands. Complete accessories for easy installation..
  • ▶Your Choice◀ This skateboard set fits all 7.5” to 8" skateboard decks. And equipped with skateboar....
Check Stock

Skateboards Complete Mini Cruiser Retro Skateboard for Kids Boys Youths Beginners 22 Inch(The Starry Sky)

  • ★【The Meketec Advantage】-Let your skateboard unique. the 3.25 inch trucks with different color better than others skateboarder..
  • ★ 【Performance】- 22.5 inch long x 6 inch wide deck, max load weight 200 lb, 60mm*45 pu smooth wheels, high speed ABEC-7 bearings..
  • ★【High Value】- Meketec Unusual skateboard appearance outperforms many of the leading brands and high cost performance price..
  • ★【What You Get】- Take this board on the park, school and road with ease, It’s the best holiday gift for kids girls beginners..
  • ★【Certified Safe】- with CE certification, this well-built skateboard is safe to ride and suitable for any level of riders, no matter whether you’re a beginner or experienced rider..
Check Stock

Premium 1 Ounce Skateboard Bearing Lubricant | Bearing Oil, High Grade Skate Bearing Lubricant, Super Smooth Bearing Lube for Skateboards, Longboards, Scooters and Roller Skates

  • 【HIGH QUALITY】This grade-A skateboard bearing lubricant is specially designed for skateboards. This Bearing Oil has low viscosity and superior lubrication effect. Only 1-2 drops can lubricate the entire bearing..
  • 【ACCURACY & SAFETY】The precision APPLICATION NEEDLE of our skateboard bearing lubricant makes you get accurate use without making a mess. The skate bearing lubricant is equipped with a CHILD SAFETY BOTTLE CAP, which can never be opened by babies and toddlers..
  • 【EXTENDS BEARING LIFE】This bearing lube for skateboards can quickly penetrate into the bearing to play a role of lubrication and rust prevention. Protect bearings from wear and tear, greatly extend bearing life and make your bearings faster..
  • 【FULLY COMPATIBLE】Our bearing oil is suitable for most skateboard brands and skateboard types, including longboards, skateboards, scooters and roller skates..
  • 【100% CUSTOMER SATISFACTION GUARANTEE】Order with confidence! Every skateboard bearing lubricant has been tested strictly to ensure higher quality. If you are not completely satisfied with the product, we will give you a full refund..
Check Stock

WhiteFang Skateboards 22 inches Kids Skateboard with Colorful PU Wheels, Mini Cruiser Skateboards for Boys Girls Beginners (Dino)

  • Need a Ride? The skateboards comes fully assembled,length 22 inch width 6.0 inch, make this board to ride with plenty of room.The deck start off with a high strength Polymer that has enough Flexibility but not too much to so it will handle the daily use. The truck 3.25 inch made by the the strongest 356 cast aluminum.The bushings have a Durometer reading of 87a.That is a perfect amount of stiffness for those long fast downhill straightaways and yet soft enough to make some nice wave like turns..
  • Looking for Smooth Glide?The wheels are polyurethane that are slightly larger than typical 22" board so you can get over those small imperfections in the road,Size-59mm Softness-83A.The bearings are the heartbeat of the board.Having bad bearings is like putting bad gas in your car... it just doesn't run as good,We take these ABEC 9 bearings better than ABEC-7,for not only a smooth ride,but will last through those dusty roads or even when you leave it on the lawn and the sprinklers hit it..
  • Wanna be more close with your kids? When you are acompany your kids to learn the skateboard,they will be more brave and safe,will thank you and love you more.Since 2020,we all have suffered a rough time,but we still can have fun with skateboard in your backyard and i....
Check Stock

WhiteFang Skateboards 22 inches Kids Skateboard with Colorful PU Wheels, Mini Cruiser Skateboards for Boys Girls Beginners (Flow)

  • Need a Ride? The skateboards comes fully assembled,length 22 inch width 6.0 inch, make this board to ride with plenty of room.The deck start off with a high strength Polymer that has enough Flexibility but not too much to so it will handle the daily use. The truck 3.25 inch made by the the strongest 356 cast aluminum.The bushings have a Durometer reading of 87a.That is a perfect amount of stiffness for those long fast downhill straightaways and yet soft enough to make some nice wave like turns..
  • Looking for Smooth Glide?The wheels are polyurethane that are slightly larger than typical 22" board so you can get over those small imperfections in the road,Size-59mm Softness-83A.The bearings are the heartbeat of the board.Having bad bearings is like putting bad gas in your car... it just doesn't run as good,We take these ABEC 9 bearings better than ABEC-7,for not only a smooth ride,but will last through those dusty roads or even when you leave it on the lawn and the sprinklers hit it..
  • Wanna be more close with your kids? When you are acompany your kids to learn the skateboard,they will be more brave and safe,will thank you and love you more.Since 2020,we all have suffered a rough time,but we still can have fun with skateboard in your backyard and i....
Check Stock

Bones Swiss Ceramic Skateboard Bearings 8 Pack

  • ... sky blue on the rubber shield, and the two-color combination is traditional Chinese color schemes. And these two colors are perfectly fit to TG-11 dazzling color chrome steels, which you might see different color effects during highly-spinning in various environments, day or night.
  • HIGH SPEED & SMOOTH SPIN: BRAVORD skateboard bearings of the chromium steel balls are oil-free and self-lubricating, which make bearings keep in high speed and spinning for minutes, and the bearings of skateboard meet international abec11, it will give you smoother feeling..
  • SPECIFICATION: The longboard bearing size is 608rs and measure 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter). We are set of 8 skate bearings, 4 aluminum bearing spacers, and 8 stainless steel bearing washers. Able to fit perfectly with most of the wheels on the market..
  • SCOPE OF APPLICATION: Also work as roller skate bearings and longboard bearings, and fits skateboard wheels, mini cruisers, kick scooters, inline skates, trikes, fidget spinners, and many electric wheeled toys..
  • PROFESSIONAL SERVICE: If you were not satisfied with our products after you received the item, then feel free to contact us. We will provide professional service until solve your problems. So be confident to have a s....
Check Stock

En pennyboard por toda la Av Universitaria Demo

  • Meketec Unique Technology - The strong 3.25 inch trucks with different color with others skateboarder,let you skateboarding slide more distinctive..
  • Performance - High speed abec 7 meketec Bearings.
  • 22.5 inch long x 6 inch wide deck, max load weight 200 lb..
  • High Value - Meketec Unusual skateboard appearance outperforms many of the leading brands and high cost performance price..
  • Advantage - Take this board on the park, school and road with ease, It’s the best holiday gift for Kids and Adults..
  • Easy to Use- With CE certification, this well-built skateboard is safe to ride and suitable for any level of riders, no matter whether you’re a....
Check Stock

better18 Skateboard Truck Speed Kit Durable Round Metal Spacers Washers Repair Nuts Kit Washers Nuts Spacers for Bearing Performance Men Women Outdoor Skateboarding Trucks

  • PACK - Skateboard Truck x 2,Skateboard Bearings x 8, Skateboard Screws 1" x 8,All-In-One Skateboard Tool x 1.
  • All-In-One Skateboard Tool - Includes 3/8", 1/2", 9/16" sockets & Phillips Screwdriver.
  • Skateboard Bearings - 8mm x 22mm x 7mm Miniature Ball Bearings, 608, ABEC-9.
  • Perfect gift for both professionals and novices, satisfy all your long-boarding needs..
  • 100% SATISFACTION GUARANTEED - Beast Guarantee promises 100% satisfaction or your money back. Fast and easy customer service with professional....
Check Stock

608zz Ball Bearings 608zz High Speed ABEC-7 Skateboard Bearings for Blenders, Skateboards,Scooters, Spinners, Roller 608 Skateboard Bearing 50 pcs

  • -Material: High Carbon Steel, ABEC-9 high precision, durable, move smooth, high speed 608 Bearings.
  • -Package Included: 50 pcs 608zz High Speed ABEC-7 Skateboard Bearings.
  • -Size: 608 Skateboard Bearing 8x22x7mm, I.D.=0.31'/ 8mm.
  • -Revolutions Per Minute (RPM) limit of 34,000 with grease lubrication high speed Skateboard Bearing.
  • -Application: 608 ball bearing used in skateboard, roller skates, wheel bearings, Skateboard Bearing.
Check Stock