Top Low frequency Range

BLAUPUNKT AMP4000D 4000W Max 1-CH Monoblock Class D Stereo Car Audio Amplifier

  • ... have the ability to connect more subwoofers to take advantage of the extra power.
  • Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Specs - Dimensions: 15” x 10” x 2.4”, Weight: 11.2 lbs..
Check Stock

Rockville RWM1202VH VHF Wireless Dual HandHeld Microphone System/Metal Receiver

  • ...held mics at once. Individual microphone volume controls. Rugged metal housing. Comfortable ergonomic composite microphone construction. Low power consumption for longer battery life..
  • System: Operating Range: 100´-200´(indoor), 65´-165´(outdoor). Channel: Two Channel. Frequency Range: 170MHz - 260MHz. Frequency Response: 80MHz-12000MHz. Frequency Width: 32Mhz. Dynamic Range: 110dB. Operating Temp: 14°F – 122°F. Oscillation Mode: Quartz Crystal. Frequency Stability: ±0.005%. Modulation Mode: VHF.Frequency Response: 80Hz – 8 KHz (±3 dB). Harmonic Radiation :< 63dBm. S/N: 60dB. RF Output Power: 10mW. Power Voltage: AC110V/ 220V - 50/60Hz..
  • Mic Battery: AA x 2. Receiver:. Sensitivity: (S/N=30dB) >2mV. De-Emphasis: 50µS. Audio Output Impedance: 600Ω. Audio Output Level.: 0-0.5V. Power Supply: AC110V /220V 50/60Hz. Current Consumption: ≤50mA. Audio Out Connector: 1/4˝ unbalanced. Transmitter:. Frequency Stability: ±0.005%. RF Output Power: ≤30mW. Modulation Mode: VHF. Maximum Deviation Range: ±50KHz. Microphone Mode: Fixed. Pre-Emphasis: 50µS. Power Supply: AA/1.5V×2. Current Consumption: ≤35mA..
Check Stock

MoCA 2.5 with 2 Gigabit Ethernet Ports - Ethernet Over Coaxial Adapter (2 Pack) | Model: TL-MC84

  • MoCA 2.5 offers actual data rates up to 2.5 Gbit/s, continues to be backward interoperable with MoCA 2.0 and MoCA 1.1, and adds MoCA protected setup (MPS), Management Proxy, Enhanced Privacy, Network wide Beacon Power, Bridge detection and TR-069 remote management..
  • Flexible frequency selection: It works at high frequency range. Frequency range is between 1125~1675 MHZ. Channels can be flexibly selected based on network condition..
  • Strong interference-proof capability: Physical layer adopts advanced ACMT mode that isOFDMA, which makes it to get strong interference-proof capability by avoiding high noise at lower frequency..
  • Advanced data link layer agreement: Link layer adopts TDMA protocol, MP2MP structure. Each device can communicate with any other one. All the adapters adopt the same TDD..
  • Absolute bandwidth supply: MOCA 2.5 adapter supports up to 3.0 Gbps throughput with low packet loss rate and low latency..
Check Stock

Mount Elbert Summit Club | I climbed Mt Elbert USA T-Shirt

  • Frequency Range: 144-148MHz, 420-450MHz. Please kindly know that UV-5R would not transmit without this frequency range..
  • 128 Channels 50 CTCSS and 104 CDCSS Dual-Band Display, Dual Freq. Display, Dual-Standby, A/B band independent operation, High/Low TX power selectable:....
  • High/Low TX power selectable: Busy channel lock-out(BCLO),128 Channels 50 CTCSS and 104 CDCSS Dual-Band Display, Dual Freq. Display, Dual-Standby, A/B....
  • Tri-color background light selectable: 0-9 grades VOX selectable. Large LCD Display.
  • Emergency Alert: 25KHz/12. 5KHz Switchable, LED Flashlight: Hight /Low RF Power Switchable.
Check Stock

Rockville, 2 RWM1202VH VHF Wireless Dual Handheld Microphone System w/Mic Receiver v2

  • ...me controls, Rugged metal housing , Comfortable ergonomic composite microphone construction, Low power consumption for longer battery life.
  • Specifications of RWM1202VH: System: Operating Range: 100'-200'(indoor), 65'-165'(outdoor), Channel: Two Channel, Frequency Range: 170MHz - 260MHz, Frequency Response: 80MHz-12000MHz, Frequency Width: 32Mhz, Dynamic Range: 110dB, Operating Temp: 14°F – 122°F..
  • Oscillation Mode: Quartz Crystal, Frequency Stability: 0. 005%, Modulation Mode: VHF, Frequency Response: 80Hz – 8 KHz (3 dB), Harmonic Radiation : < 63dBm, S/N: 60dB, RF Output Power: 10mW, Power Voltage: AC110V/ 220V - 50/60Hz, Mic Battery: 9V.
  • Receiver: Sensitivity: (S/N=30dB) >2mV , De-Emphasis: 50µS , Audio Output Impedance: 600O , Audio Output Level. : 0-0. 5V , Power Supply: AC110V /220V 50/60Hz , Current Consumption: =50mA , Audio Out Connector: 1/4" unbalanced , Transmitter: Frequency Stability: 0. 005% , RF Output Power: =30mW , Modulation Mode: VHF , Maximum Deviation Range: 50KHz , Microphone Mode: Fixed , Pre-Emphasis: 50µS , Power Supply: AA/1. 5V×2 , Current Consumption: =35mA....
Check Stock

L.R Baggs Anthem Acoustic Guitar Pickup and Microphone

  • Patented TRUMIC carries the majority of the guitars’ frequency range while the Element Pickup carries the lowest frequencies.
  • Mix control blends between the TRU MIC augmented with low frequency support from the Element Pickup and full-range Element Pickup.
  • Noise cancelling microphone technology eliminates any annoying honky or boxy qualities from the inside of the guitar.
  • Soundhole preamp includes volume, mix, phase inversion, battery check, and mic trim controls.
  • All discrete pre-contoured soundhole preamp with preset crossover.
Check Stock

ButtKicker BK-LFE Low Frequency Effects System

  • Offers true infrasonic, or low-frequency response with a resonant frequency of 9 Hz.
  • Attaches to seats and floors, and sends low-frequency sound directly into the listener's body.
  • Accurately reproduce the feeling range of many natural and man-made sounds.
  • Power handling ranges from a minimum of 400 watts to a 1,500-watt maximum.
  • Measures 5.375 x 5.5 x 5.375 inches (WxHxD), and weighs 11 pounds.
Check Stock

Portable tinySA Spectrum Analyzer - AURSINC Hand Held Frequency Analyzer 2021 Upgraded V0.3.1 | 100kHz to 960MHz MF/HF/VHF UHF Input | ESD Protected Function & 2.8 inch Touchscreen | Signal Generator

  • ...are installed which will be more stable and sensitive with higher antistatic level and longer service life. Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.
  • [Frequency Range] Spectrum analyzers like the tinySA use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes..
  • [2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer. Color display showing 290 scan points covering up to the full low or high frequency range.
Check Stock

2023 AURSINC Ultra TinySA 4” Spectrum Analyzer – Portable V0.4.5.1 100kHz-5.3GHz Frequency Analyzer | Built-in 3000mAh Battery & 32GB SD Card | RBW LNA DANL Phase Noise RF Signal Generator

  • 2023 NEWEST TINYSA: Produced by Hugen, AURSINC ULTRA Tinysa owns high performance frequency in 100khz to 800MHz, and when in ultra mode, the analyzer can reach 5.3GHz. With new 4” touchscreen display and installed with the latest hardware system V0.4.5.1. tinysa is more professional, stable, sensitive and easy to be operated.
  • A Lab-grade Spectrum Analyzer: The ultra-wide range frequency can reach around 6GHz, together with the excellence of phase noise [email protected], DANL -166dBm/Hz.
  • In Ultra mode the input low pass filter is automatically enabled for all frequencies within the pass-band of the low pass filter (up to 750MHz). For higher frequencies the low pass filter will be bypassed and the measurement will be slower due to the multiple measurements per frequency required for the mirror and spur elimination algorithm.
  • Differences to the Former TinySa: The first big one is that now the default maximum frequency is 800mhz, so you no longer have to switch between low and high range,and can monitor the complete range in one sweep.
  • Second,In the level menu, there is the LNA, which will provide 20db of extra gain if you have very low level signal.
  • Lastly, RBW frequency from 200hz to 850khz which can be set to match the measurement requirements, meet ....
Check Stock

Dual UHF Wireless Microphone System - Portable Professional Cordless Microphone Set Wireless Mic Kit w/Headset Mic, Lavalier Mic, Beltpack Transmitter, Receiver - Karaoke & Conference - Pyle PDWMU211

  • UHF NARROW BAND: These cordless microphones for singing feature UHF audio transmission for unsurpassed performance w/ high signal over noise ratio for clear, distortion-free, crisp vocal & excellent sound reproduction unlike low-grade VHF unit.
  • SELECTABLE FREQUENCY RANGE: This wireless professional microphone features digital display w/ 8 channel selectable mic frequency range w/ low distortion. Enjoy cordless singing to karaoke music & mobility for energetic on-stage performance.
  • AUDIO RECEIVER: Pyle wireless microphone system includes a plug-in audio adapter receiver with ¼” (6.3mm) jack. Features integrated antenna for extended wireless range. It directly connects to amplifier, stereos, audio processors, and DJ mixer.
  • 160' FT OPERATION RANGE: The wireless microphone set features Up to 160'+ ft. operation range & lets you move w/ ease without those annoying cords. Used for karaoke, classroom, office/business applications. Perfect for public audio & studio use.
  • EASY TO OPERATE: This dual microphone system is battery-operated & easy to control. Features independent & adjustable channel volume controls, convenient power ON/OFF switch, LED indicator lights, & LCD digital display screen for frequency read-out.
Check Stock

Onkyo A-9110 Home Audio Integrated Stereo Amplifier - Black

  • SUPERIOR SOUND. High-current EI transformer makes sure that sound quality doesn't suffer. Large custom audio capacitors and a discrete output stage..
  • AMP TECHNOLOGY. Wide Range Amplification Technology delivers high-current power stability via large custom capacitors, while low-NFB amps capture depth and spatiality for a wide frequency spectrum with low distortion..
  • AUTHENTIC AUDIO. Direct Mode bypasses tone and PM Bass circuitries. In combination with a refined amp circuit design, signal-pathlengths have been significantly reduced in comparison to the A-9010 for even more accurate and faithful sound..
  • BASS BOOST. Phase Matching Bass Boost eliminates phase-shift between low- and mid-range frequency bands. Bass response is enhanced without compromising vocal clarity, which is especially useful when playing music at low volumes..
  • FEATURES. 50 W + 50 W (4 ohms, 20 hz–20 kHz, 0.9% THD, 2-ch Driven, FTC). Remote controller..
Check Stock

BOSS Audio Systems R3002 Riot Series Car Audio Amplifier - 600 High Output, 2 Channel, 2/8 Ohm, High/Low Level Inputs, High/Low Pass Crossover, Full Range, Hook Up to Stereo and Subwoofer, Class AB

  • Power - 300 Max x 2 @ 2 Ohms, 150 Max x 2 @ 4 Ohms, 600 Max Bridged x 1 @ 4 Ohms.
  • Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels.
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction.
  • Fixed High-Pass Crossover - Speakers reproduce sound based on high, low or mid-range frequencies. The High-Pass Crossover gears specifically towards “highs” in all size speakers including mid ranges and tweeters.
Check Stock